1. Introduction
This manual provides detailed instructions for the Lexar JumpDrive Fingerprint F35 PRO USB 3.2 Gen 1 Flash Drive. This device offers secure, high-speed data storage with advanced fingerprint authentication and 256-bit AES encryption. Please read this manual thoroughly to ensure proper setup and operation of your flash drive.
Image 1.1: Lexar JumpDrive Fingerprint F35 PRO USB 3.2 Gen 1 Flash Drive.
Product Overview Video
Video 1.1: An overview of the Lexar JumpDrive Fingerprint F35 PRO USB 3.2 Gen 1 Flash Drive, highlighting its key features and security capabilities.
2. Key Features
- Fingerprint Authentication: Provides an additional layer of security for confidential files, allowing access with a simple touch.
- Multiple Fingerprint IDs: Supports registration of up to 10 different fingerprints, enabling shared access among authorized users.
- Ultra-Fast Recognition: Fingerprint identification occurs in less than 1 second for quick access.
- High-Speed Performance: Achieves read speeds of up to 400MB/s and write speeds of up to 300MB/s for efficient data transfer.
- 256-bit AES Encryption: Protects sensitive files with robust hardware-based encryption.
- Durable Design: Features a striking metal body and a protective slider to safeguard the USB connector and internal components.
Image 2.1: The Lexar JumpDrive F35 PRO features a stylish metal design and a protective slider to keep the connector and contents safe.
3. Setup and Fingerprint Registration
3.1 Initial Connection
- Insert the Lexar JumpDrive F35 PRO into an available USB 3.2 Gen 1 (or compatible) port on your computer.
- The drive will be detected as a standard USB storage device.
3.2 Software Installation and Fingerprint Setup
The Lexar JumpDrive F35 PRO requires dedicated software for fingerprint registration and managing secure partitions. This software is typically pre-loaded on the drive or available for download from the official Lexar support website.
- Locate and run the setup executable file from the drive (e.g.,
Lexar_F35_PRO_Setup.exe) or download the latest version from the Lexar website. - Follow the on-screen instructions to install the Lexar DataShield software.
- Once installed, launch the Lexar DataShield application.
- You will be prompted to set up an administrator password. This password serves as a backup access method if fingerprint authentication fails or is unavailable. Store this password securely.
- Proceed to register your fingerprints. The software will guide you through scanning your finger multiple times from different angles to ensure accurate recognition.
- You can register up to 10 unique fingerprints. This allows multiple users to access the secure partition or provides alternative fingers for your own access.
- The software also allows you to define the size of the secure (encrypted) partition and a public (unencrypted) partition, if desired.
Image 3.1: Access files on the Lexar JumpDrive F35 PRO using fingerprint authentication, eliminating the need for passwords.
Image 3.2: The drive supports saving up to ten different fingerprint IDs, allowing access for family, partners, or business collaborators.
4. Operating Instructions
4.1 Accessing the Secure Partition
- Insert the Lexar JumpDrive F35 PRO into your computer's USB port.
- Place your registered finger on the fingerprint sensor. The drive will authenticate your fingerprint in less than 1 second.
- Upon successful authentication, the secure partition of the drive will become accessible on your computer.
- If fingerprint authentication fails after several attempts, you may be prompted to enter your administrator password.
4.2 Data Transfer
Once the drive is accessible, you can transfer files to and from the secure partition like any other storage device. The drive supports USB 3.2 Gen 1 speeds, offering up to 400MB/s read and 300MB/s write speeds for quick data transfers.
Image 4.1: The Lexar JumpDrive F35 PRO provides ultra-fast access, recognizing your fingerprint ID in less than 1 second.
Image 4.2: Experience high-speed USB 3.2 Gen 1 performance with read speeds up to 400MB/s and write speeds up to 300MB/s.
4.3 Data Security
The Lexar DataShield software utilizes 256-bit AES encryption to secure your files within the protected partition. This hardware-based encryption ensures that your data remains confidential even if the drive is lost or stolen, as it cannot be accessed without proper authentication.
Image 4.3: The Lexar DataShield software provides 256-bit AES encryption to keep your sensitive files secure.
5. Maintenance
- Safe Ejection: Always safely eject the flash drive from your computer before physically removing it to prevent data corruption.
- Physical Care: Keep the drive clean and free from dust and debris. Use a soft, dry cloth to wipe the fingerprint sensor if needed. Avoid exposing the drive to extreme temperatures or moisture.
- Software Updates: Periodically check the Lexar website for updates to the DataShield software to ensure optimal performance and security.
- Temperature: It is normal for the drive to become slightly warm during extended use, especially during large data transfers. This does not typically indicate a malfunction.
6. Troubleshooting
6.1 Fingerprint Not Recognized
- Ensure your finger is clean and dry.
- Try different angles or apply slight pressure to the sensor.
- If you have registered multiple fingerprints, try using another registered finger.
- If repeated attempts fail, use the administrator password to access the drive.
- Consider re-registering your fingerprint(s) through the Lexar DataShield software if recognition issues persist.
6.2 Software Installation Issues
- Ensure you are running the installer with administrative privileges.
- Temporarily disable antivirus software during installation if it interferes.
- Download the latest software version directly from the official Lexar support website.
- If the 'Register' function is greyed out, ensure all terms of service have been reviewed and accepted, and that the drive is properly connected.
6.3 Drive Not Detected
- Try connecting the drive to a different USB port on your computer.
- Test the drive on another computer to rule out computer-specific issues.
- Ensure the USB port is functional and provides sufficient power.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Lexar |
| Model Name | F35 PRO |
| Item Model Number | LJDF35P128G-RNBNG |
| Memory Storage Capacity | 128 GB |
| Hardware Interface | USB 3.2 Gen 1 |
| Read Speed | Up to 400 MB/s |
| Write Speed | Up to 300 MB/s |
| Special Feature | Encrypted (256-bit AES) |
| Connectivity Technology | USB |
| Color | Black |
| Item Weight | 1.06 ounces |
| Package Dimensions | 5.43 x 3.94 x 0.35 inches |
| UPC | 843367127474 |
8. Warranty and Support
Lexar products are designed for reliability and performance. For detailed warranty information, please refer to the warranty card included with your product or visit the official Lexar website. For technical support, software downloads, or further assistance, please visit the Lexar support page or contact their customer service.
Lexar Official Website: www.lexar.com
