WdtPro Rechargeable Headlamp (2-Pack) and S3000 LED Flashlight User Manual

1. Introduction

Thank you for choosing the WdtPro Rechargeable Headlamp 2-Pack and S3000 LED Flashlight. This manual provides essential information for the safe and effective use of your lighting devices. Please read it thoroughly before operation and retain it for future reference.

Image 1.1: The WdtPro package includes two rechargeable headlamps and one S3000 LED flashlight, along with charging accessories.

2. Package Contents

Please verify that all items are present in your package:

• 2 x WdtPro Rechargeable Headlamps
• 1 x WdtPro S3000 LED Flashlight
• 2 x USB Charging Cables
• Batteries (pre-installed or included for both devices)

Image 2.1: The WdtPro S3000 LED Flashlight is packaged securely, indicating its features and brand.

3. Setup

3.1 Headlamp Setup

1. Adjust Headband: Place the headlamp on your head. Adjust the elastic strap to ensure a snug yet comfortable fit. The strap should not be too tight to avoid discomfort.
2. Angle Adjustment: The headlamp unit can be tilted up to 90 degrees. Adjust the angle to direct the light beam precisely where needed.

3.2 Flashlight Setup

1. Battery Installation: Ensure the battery is correctly installed with the positive (+) terminal facing the head of the flashlight. The S3000 flashlight typically comes with the battery pre-installed or included.
2. Initial Charge: It is recommended to fully charge both the headlamp and flashlight before first use.

4. Charging Instructions

Both the headlamp and flashlight are designed for convenient recharging.

4.1 Headlamp Charging

1. Locate the Micro USB charging port on the side of the headlamp's battery compartment.
2. Connect the provided USB charging cable to the headlamp and a standard USB power source (e.g., wall adapter, computer, power bank).
3. During charging, blue indicator lights on the battery compartment will flash, indicating the charging progress.
4. Charging typically takes 4-5 hours for a full charge. Once fully charged, all four blue indicator lights will remain steady.
5. A full charge provides approximately 3-11 hours of working time, depending on the selected light mode.

Image 4.1: The headlamp features a Micro USB port for charging. Blue indicator lights show charging status and battery level.

4.2 Flashlight Charging

The S3000 flashlight is also rechargeable. Refer to the specific charging port and indicator details on the flashlight itself, typically a USB-C or Micro USB port. Connect it to a USB power source using the provided cable until the charging indicator signals a full charge.

5. Operating Instructions

5.1 Headlamp Operation

1. Power On/Off: Press the power button located on the top of the headlamp to turn it on. Press again to cycle through modes, and a long press typically turns it off.
2. Light Modes: The headlamp features 4 primary brightness modes and 2 red light modes. Repeatedly press the power button to cycle through:
   • Low Brightness
   • Medium Brightness
   • High Brightness
   • Strobe (Flashing)
   • Red Light (Steady)
   • Red Light (Flashing/Warning)
3. Battery Level Indicator: Four blue LED lights on the battery compartment indicate the remaining battery level (25%, 50%, 75%, 100%).
4. Angle Adjustment: The headlamp's light unit can be manually tilted downwards by up to 90 degrees to adjust the beam direction.

Image 5.1: The headlamp offers multiple lighting modes, including various brightness levels and red warning lights, along with a clear battery indicator.

Image 5.2: The headlamp's light module can be adjusted up to 90 degrees to direct the beam as required.

5.2 Flashlight (S3000) Operation

1. Power On/Off: Press the tail-cap switch or side button (depending on model variant) to turn the flashlight on.
2. Light Modes: The S3000 flashlight typically features 3 modes (e.g., High, Low, Strobe). Press the power button repeatedly to cycle through these modes.
3. Zoom Function: Some S3000 models feature a zoomable design. Extend or retract the head of the flashlight to adjust the beam from a wide floodlight to a focused spotlight.

Image 5.3: The headlamp provides powerful illumination, suitable for outdoor activities and dark environments.

6. Maintenance

Proper maintenance ensures the longevity and optimal performance of your WdtPro lighting devices.

• Cleaning: Wipe the exterior of the headlamp and flashlight with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Battery Care: Recharge the devices regularly, even if not in frequent use, to maintain battery health. Avoid completely draining the battery before recharging.
• Storage: Store the headlamp and flashlight in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, ensure batteries are partially charged (around 50%).
• Water Resistance: The devices are water-resistant, not waterproof. Avoid submerging them in water. Ensure charging ports are dry before connecting cables.

7. Troubleshooting

If you encounter issues with your WdtPro headlamp or flashlight, refer to the following common solutions:

If the problem persists after attempting these solutions, please contact WdtPro customer support.

8. Specifications

Key technical specifications for the WdtPro Headlamp and S3000 Flashlight:

• Brand: WdtPro
• Model: S3000 (Flashlight)
• Light Source Type: LED
• Brightness: Up to 6000 Lumens (White Brightness)
• Power Source: Battery Powered (Rechargeable Lithium Ion)
• Voltage: 3.7 Volts
• Special Features: Lightweight, Rechargeable
• Water Resistance Level: Water Resistant
• Color: Black
• Recommended Uses: Camping, Hiking, Fishing, Automotive Repairs, Household Tasks

9. Warranty and Support

WdtPro products are designed for durability and performance. For warranty information, please refer to the product packaging or the official WdtPro website. If you require technical assistance or have questions regarding your product, please contact WdtPro customer support through the retailer where the product was purchased or visit the official WdtPro store online: WdtPro Store on Amazon.