1. Introduction
Welcome to the Dragonhawk L3 Tattoo Kit. This manual provides essential information for the safe and effective use of your new tattoo machine. Please read it thoroughly before operation to ensure optimal performance and longevity of your device.
Figure 1: Overview of the Dragonhawk L3 Tattoo Kit and its included components.
2. Product Features
The Dragonhawk L3 Tattoo Kit is designed for professional tattoo artists, offering precision, durability, and user-friendly features.
- Cordless/Cord Operation: The L3 tattoo machine can operate cordlessly for up to 7 hours, providing freedom of movement. An RCA jack part is included for corded use.
- Versatile Stroke Options: Features 7 adjustable stroke options from 2.4 mm to 4.2 mm, allowing for various tattooing styles.
- Professional Precision: Excels in lining, shading, and blending, ensuring high-quality results.
- Powerful Mcore Motor: Equipped with a robust Mcore motor for exceptional power and durability, gliding smoothly through skin.
- Advanced Direct Drive System: Ensures smooth, precise, and quiet operation with stable voltage and low noise.
- Smart Screen: Upgraded smart screen enhances visibility and user experience.
Figure 2: The Dragonhawk L3 tattoo pen offers both cordless and corded operation for flexibility.
Figure 3: The machine features 7 different stroke length settings for diverse tattooing needs.
Figure 4: The powerful Mcore motor ensures exceptional performance and durability.
Figure 5: The advanced direct drive system minimizes vibrations for smooth operation.
3. Setup
3.1 Unboxing and Initial Inspection
- Carefully remove all components from the packaging.
- Verify that all items listed in the kit contents are present and undamaged.
- Familiarize yourself with the main parts of the tattoo pen machine and its accessories.
3.2 Charging the Battery
Before first use, fully charge the wireless tattoo pen battery. The kit includes an extra replaceable battery for extended use.
- Connect the charging cable to the Type-C port on the battery.
- Plug the other end into a compatible USB power adapter.
- The smart screen will indicate charging status. A full charge typically takes 2 hours.
Figure 6: The L3 features a replaceable and rechargeable battery for convenience.
Figure 7: The 2000mAh battery provides 5-7 hours of working time after a 2-hour charge.
3.3 Attaching Needles
- Ensure the machine is powered off.
- Select the appropriate tattoo needle cartridge for your design.
- Insert the needle cartridge firmly into the machine's grip until it clicks into place.
- To adjust the needle length, rotate the non-slip grip.
Figure 8: Rotate the non-slip grip to precisely adjust the needle length.
4. Operating Instructions
4.1 Powering On/Off
- To power on the machine, press and hold the power button until the screen illuminates.
- To power off, press and hold the power button again.
4.2 Adjusting Voltage and Stroke Length
- Use the '+' and '-' buttons on the smart screen to adjust the voltage. The recommended working voltage is 4V-12V.
- The stroke length can be adjusted by rotating the grip of the machine. The available stroke options are 2.4mm, 2.7mm, 3.0mm, 3.3mm, 3.6mm, 3.9mm, and 4.2mm.
4.3 Preparing the Skin
- Clean and shave the area of the skin where the tattoo will be applied.
- Apply the tattoo stencil to the prepared skin.
5. Maintenance
Proper maintenance ensures the longevity and hygiene of your Dragonhawk L3 Tattoo Kit.
- Cleaning: After each use, clean and disinfect the tattoo area and all tools. Use appropriate sterilization methods for reusable components.
- Storage: Store the tattoo kit and accessories properly in a clean, dry environment away from direct sunlight and extreme temperatures.
- Battery Care: Avoid fully discharging the battery frequently. Charge it regularly even if not in use for extended periods to maintain battery health.
6. Troubleshooting
This section addresses common issues you might encounter with your Dragonhawk L3 Tattoo Kit.
| Issue | Possible Cause | Solution |
|---|---|---|
| Machine not turning on | Low battery; Power button not pressed correctly | Charge the battery fully; Press and hold the power button firmly |
| Inconsistent needle movement | Improperly attached needle cartridge; Low voltage setting | Ensure needle cartridge is securely attached; Increase voltage setting |
| Machine vibrating excessively | Loose components; Damaged motor | Check all connections and ensure they are tight; Contact customer support if issue persists |
| Battery not holding charge | Battery degradation; Faulty charger | Replace battery with the extra one provided; Try a different charging cable/adapter |
If you encounter an issue not listed here or if the suggested solutions do not resolve the problem, please contact Dragonhawk customer support.
7. Specifications
Detailed technical specifications for the Dragonhawk L3 Tattoo Pen Machine:
| Attribute | Value |
|---|---|
| Weight | 233 g (8.2 Ounce) |
| Diameter & Length | 32mm x 140mm (5.5 in) |
| Working Time | 5-7 hours (cordless) |
| Stroke Options | 2.4mm, 2.7mm, 3.0mm, 3.3mm, 3.6mm, 3.9mm, 4.2mm |
| Speed | 8V/6500RPM |
| Connect Cord | Type-C |
| Working Voltage | 4V-12V |
| Battery Capacity | 2000mAh |
| Water Resistance Level | Water Resistant |
Figure 9: Detailed parameters of the Dragonhawk L3 Tattoo Pen Machine.
8. Important Safety Guidelines
Please adhere to the following safety information for your protection and the proper functioning of the device:
- For external use only.
- Always ensure proper sterilization of needles and equipment before and after each use.
- Do not operate the machine if it is damaged or malfunctioning.
- Keep the device away from water and excessive moisture.
- Store out of reach of children.
- Consult a professional for any repairs or servicing. Do not attempt to disassemble the machine yourself.
9. Warranty and Customer Support
Dragonhawk provides coverage for your product for peace of mind. For any inquiries regarding warranty claims, product issues, or technical support, please reach out through Amazon's messaging system.
For video tutorials, setup guides, and professional tips, visit Youtube.com/@Dragonhawkofficial. This resource covers machine maintenance, technique breakdowns, and more.
The standard return policy for this product is 30 days for refund or replacement, as per Amazon's policy.
