Dinftin PFJ-2-in-1
Contents
Dinftin Electric Diatomaceous Earth Duster and Blower
Model: PFJ-2-in-1
Introduction
The Dinftin Electric Diatomaceous Earth Duster and Blower is a versatile, battery-powered tool designed for efficient application of diatomaceous earth and other powdered substances, as well as for light blowing tasks. This device is compatible with DeWalt 20V lithium-ion batteries (battery not included), integrating seamlessly with your existing power tool ecosystem. Its 1-liter capacity and 19 cm (7.5-inch) copper nozzle ensure precise and controlled distribution, making it suitable for various gardening, household, and outdoor maintenance applications.
Safety Instructions
WARNING: Always read and understand all safety warnings and instructions before operating this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
- Personal Safety: Always wear appropriate personal protective equipment (PPE) such as safety glasses, gloves, and a dust mask when operating the duster, especially when handling powdered substances like diatomaceous earth. Avoid inhaling dust.
- Battery Safety: This tool is designed for DeWalt 20V lithium-ion batteries. Use only specified batteries. Ensure the battery is fully charged before use. Remove the battery when not in use, before cleaning, or when performing maintenance.
- Work Area: Keep the work area clean and well-lit. Do not operate in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Substance Compatibility: Only use dry, fine powders suitable for dusting applications. Do not use liquids or abrasive materials that could damage the device.
- Children and Bystanders: Keep children and bystanders away while operating the tool.
- Storage: Store the tool in a dry, secure place out of reach of children.
Package Contents
Verify that all items listed below are present and in good condition upon unpacking:
- 1 x Electric Diatomaceous Earth Duster/Blower Unit
- 1 x Duster Nozzle (19 cm / 7.5 inches)
- 1 x Blower Nozzle
- 1 x User Manual
Note: DeWalt 20V battery is not included and must be purchased separately.
Setup
1. Attaching the Nozzle
- Identify the desired nozzle (duster or blower).
- Align the nozzle with the opening on the front of the main unit.
- Twist the nozzle clockwise until it is securely fastened. Ensure it is tight to prevent air or powder leakage.
2. Installing the Battery
- Ensure the tool's power switch is in the "OFF" position.
- Slide a charged DeWalt 20V lithium-ion battery into the battery port at the base of the handle until it clicks into place.
- To remove the battery, press the release button on the battery pack and slide it out.
3. Filling the Powder Container (Duster Mode)
- Unscrew the transparent powder container from the main unit.
- Fill the container with the desired dry, fine powder (e.g., diatomaceous earth). Do not overfill; leave some space for air circulation. The container has a 1-liter capacity.
- Screw the container back onto the main unit securely. Ensure a tight seal to prevent powder leakage.

Image: Overview of the Dinftin Electric Duster showing the 1-liter transparent container, the 7.5-inch copper nozzle, and the battery connection point. This image highlights the large capacity, electric power, transparent container for visibility, and compatibility with 20V MAX batteries.
Operating Instructions
Using as a Duster
- Ensure the powder container is filled and securely attached, and the duster nozzle is installed.
- Install a charged DeWalt 20V battery.
- Aim the nozzle at the target area.
- Press the power trigger to activate the duster. The motor will start, and powder will be dispensed through the nozzle.
- Move the duster steadily to ensure even application. The 19 cm (7.5-inch) copper nozzle is designed for precise application in hard-to-reach areas and has a 3/8-inch diameter to prevent clogging.
- Release the trigger to stop dusting.

Image: The Dinftin Electric Duster in action, precisely applying powder to the base of plants in a garden. This demonstrates the precision and clog-free operation of the 7.5-inch copper nozzle for targeted application.
Using as a Blower
- Ensure the blower nozzle is installed and the powder container is empty or removed.
- Install a charged DeWalt 20V battery.
- Aim the blower nozzle at the debris or area to be cleared.
- Press the power trigger to activate the blower.
- Move the blower to direct the airflow and clear debris. This function is suitable for light debris, drying surfaces, or inflating small items.
- Release the trigger to stop blowing.

Image: A collage showing the Dinftin tool used as a blower for various tasks, including starting a grill fire, clearing leaves from a car, cleaning sawdust in a workshop, and inflating a pool float. This illustrates the versatility of the blower function.
Application Tips
- For best results when dusting, apply on a calm day to prevent powder drift.
- Hold the duster at an appropriate distance from the target to achieve desired coverage.
- Regularly check the powder level through the transparent container.

Image: A collage depicting the Dinftin Electric Duster being used in multiple scenarios: dusting plants in a garden, applying powder in a chicken coop, treating an indoor area, and dusting crops in a field. This highlights its utility as a multi-scene gardening and maintenance tool.
Maintenance
Cleaning
- Always remove the battery before cleaning.
- Empty any remaining powder from the container after each use.
- Wash the powder container with warm, soapy water and rinse thoroughly. Allow it to dry completely before reattaching.
- Use a soft, dry cloth to wipe down the main unit. Do not use harsh chemicals or abrasive cleaners.
- Clear any blockages in the nozzle using a thin wire or compressed air.
Storage
- Store the tool in a clean, dry place, away from direct sunlight and extreme temperatures.
- Ensure the battery is removed before storing for extended periods.
- Keep out of reach of children and pets.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Tool does not turn on. | Battery not installed correctly or discharged. | Ensure battery is fully charged and properly seated. |
| No powder dispensed or weak airflow. | Nozzle clogged, container empty, or container not sealed properly. | Check for clogs in the nozzle and clear them. Refill container. Ensure container is tightly screwed on. |
| Powder leakage from container seal. | Container not screwed on tightly or seal damaged. | Tighten the container. Inspect the seal for damage; replace if necessary. |
| Reduced performance. | Low battery charge or internal blockage. | Charge the battery. Clean the unit thoroughly, including the internal pathways if accessible. |
Specifications
- Model: PFJ-2-in-1
- Brand: Dinftin
- Power Source: Battery-powered (compatible with DeWalt 20V lithium-ion batteries)
- Sprayer Bottle Material: High-quality ABS plastic
- Nozzle Material: Copper pipe
- Sprayer Bottle Capacity: 1 Liter (1L)
- Nozzle Length: 19 cm (7.5 inches)
- Nozzle Diameter: 3/8 inch (prevents clogging)
- Product Dimensions (L x W x H): Approximately 2.54 x 2.54 x 2.54 cm (1 x 1 x 1 inch) - Note: This dimension seems incorrect from source, likely referring to packaging. The image shows approx 47cm length.
- Weight: 1.1 kg (2.4 lbs) (without battery)
- Color: Black and Yellow
- UPC: 714855906119

Image: An illustration of the Dinftin Electric Duster showing its key dimensions: overall length (18.5 inches/47 cm), nozzle length (7.5 inches/19 cm), nozzle diameter (3/8 inch/1 cm), and container dimensions (6.3 inches/16 cm height, 3.5 inches/9 cm width). This highlights the innovative and portable design.
Warranty and Support
Specific warranty information for the Dinftin Electric Diatomaceous Earth Duster and Blower is not provided in this manual. For details regarding warranty coverage, technical support, or replacement parts, please contact the manufacturer directly or refer to the product packaging and purchase documentation.
Manufacturer: Dinftin
Please retain your proof of purchase for any warranty claims.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.