Benchmaster Lucy Recliner Chair with Ottoman (Model 2108C) - Instruction Manual

1. Introduction

Thank you for choosing the Benchmaster Lucy Recliner Chair with Ottoman. This manual provides essential instructions for the safe assembly, operation, and maintenance of your new furniture. Please read this guide thoroughly before use and retain it for future reference.

The Benchmaster Lucy is a contemporary modern swivel recliner and ottoman designed for comfort and relaxation in various home settings.

2. Safety Information

• Weight Capacity: Do not exceed the maximum weight recommendation of 265 pounds. Exceeding this limit may cause damage to the chair and potential injury.
• Assembly: Ensure all components are securely fastened according to the assembly instructions before using the chair.
• Children: Keep children away from moving parts during operation to prevent injury.
• Placement: Place the chair on a level, stable surface. Ensure adequate space around the chair for reclining and swiveling.
• Cleaning: Follow the recommended cleaning instructions to avoid damage to the faux leather upholstery. Do not use harsh chemicals or abrasive cleaners.

3. Package Contents

Please verify that all parts are present before beginning assembly. If any parts are missing or damaged, contact customer support.

• Recliner Chair Components (Backrest, Seat, Armrests, Base)
• Ottoman Components (Cushion, Base)
• Assembly Hardware (Screws, washers, tools if included)
• Instruction Manual

Figure 3.1: A complete view of the Benchmaster Lucy recliner chair and its matching ottoman, showcasing the modern design and white faux leather upholstery.

4. Setup and Assembly

Full assembly is required for the Benchmaster Lucy recliner chair and ottoman. It is recommended to have two people for assembly.

4.1. Assembly Steps

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a soft, clean surface to prevent scratches.
2. Assemble Chair Base: Attach the chair's swivel base components as per the included hardware instructions. Ensure all bolts are tightened securely.
3. Attach Chair Backrest: Connect the backrest to the seat frame. Align the brackets and secure them with the provided screws.
4. Install Armrests: Attach the armrests to the chair frame, ensuring they are firmly in place.
5. Assemble Ottoman: Connect the ottoman cushion to its base using the provided hardware.
6. Final Check: Once assembled, gently test the chair and ottoman to ensure all connections are stable and secure before use.

Figure 4.1: An illustrative view of the recliner chair and ottoman, useful for visualizing components during assembly.

5. Operating Instructions

5.1. Manual Reclining Function

The Benchmaster Lucy recliner features a manual reclining mechanism. To recline, apply gentle pressure to the backrest while leaning back. The chair will smoothly adjust to your desired reclining angle. To return to an upright position, lean forward and the chair will follow.

Figure 5.1: The recliner chair is shown in its fully reclined state, demonstrating the manual reclining function and how it pairs with the ottoman for extended comfort.

5.2. 360-Degree Swivel Function

The chair is equipped with a 360-degree swivel base, allowing you to rotate freely without moving the entire chair. Simply push off the floor with your feet or use your hands on the armrests to turn the chair in any direction.

Figure 5.2: This image provides a front perspective of the recliner, emphasizing the circular black base that enables the 360-degree swivel function.

6. Maintenance and Care

Proper care will extend the life and appearance of your Benchmaster Lucy recliner and ottoman.

6.1. Faux Leather Upholstery Care

• Regular Cleaning: Vacuum as needed with a soft brush attachment or gently brush the surface to remove dust and loose debris.
• Spot Cleaning: For spills or stains, use a high-quality leather cleaning product specifically designed for faux leather. Alternatively, a mild non-detergent, non-alkaline soap diluted in water can be used. Apply the solution to a clean, soft cloth and gently wipe the affected area.
• Drying: After cleaning, wipe the area with a clean, damp cloth to remove any soap residue, then dry immediately with a clean, dry cloth.
• Avoid: Do not use solvents, abrasive cleaners, or detergents, as these can damage the faux leather finish. Avoid direct sunlight and heat sources to prevent fading and cracking.

Figure 6.1: A detailed view of the faux leather material on the chair's headrest, highlighting its texture and finish.

6.2. Frame and Base Care

• Wipe the black finish solid wood base and frame with a soft, dry cloth to remove dust.
• Avoid using liquid cleaners directly on the wood, as this may cause damage.

7. Troubleshooting

This section addresses common issues you might encounter with your recliner chair.

8. Specifications

Detailed product specifications for the Benchmaster Lucy Recliner Chair and Ottoman.

Figure 8.1: This diagram illustrates the key dimensions of the recliner chair and its accompanying ottoman, including height, width, and depth.

9. Warranty Information

The Benchmaster Lucy Recliner Chair and Ottoman comes with a Limited 1-year warranty from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal household use.

The warranty does not cover:

• Damage resulting from improper assembly or use.
• Damage from misuse, abuse, neglect, or accidents.
• Normal wear and tear, including fading or stretching of upholstery.
• Damage caused by unauthorized repairs or modifications.

Please retain your proof of purchase for warranty claims.

10. Customer Support

If you have any questions, require assistance with assembly, or need to report a missing or damaged part, please contact Benchmaster customer support.

For the most up-to-date contact information, please visit the official Benchmaster website or refer to your purchase documentation.

Online: Benchmaster Store on Amazon