Stauer 1920s Retrograde Watch Model 55092 Instruction Manual

1. Introduction

The Stauer 1920s Retrograde Watch Model 55092 is an analog timepiece featuring a design inspired by early 20th-century aesthetics. This watch incorporates retrograde hour and minute indicators, a sunburst guilloché dial, and a brown leather band. Constructed with a stainless steel case, it is designed for daily wear and offers water resistance. This manual provides essential information for the proper use and care of your watch.

Figure 1.1: Front view of the Stauer 1920s Retrograde Watch, showcasing the dial and leather band.

2. Product Features

• Retrograde Indicators: The watch features unique retrograde hour and minute hands that move in a semi-circular path and return to their starting point upon reaching the end of their scale.
• Dial Design: An elegant sunburst guilloché face provides a distinct visual element.
• Case and Crystal: Housed in a stainless steel case with a scratch-resistant mineral crystal face for durability.
• Movement: Equipped with a precision quartz movement for accurate timekeeping.
• Watch Band: Features a genuine brown leather band for comfortable wear.
• Water Resistance: Designed with water resistance suitable for everyday exposure.

Figure 2.1: Angled view highlighting the retrograde display and sunburst guilloché dial.

3. Setup and Initial Use

3.1. Setting the Time

1. Locate the crown on the right side of the watch case.
2. Gently pull the crown outwards to the time-setting position.
3. Rotate the crown clockwise or counter-clockwise to adjust the hour and minute hands to the correct time. Observe the retrograde movement as the hands reset at the end of their arc.
4. Once the time is set, push the crown back into its original position to engage the movement and start the watch.

Figure 3.1: Side view of the watch, indicating the position of the crown for time adjustment.

3.2. Adjusting the Leather Band

The genuine leather band is designed for comfort. To adjust, simply thread the end of the band through the buckle and secure it in the desired hole for a snug, yet comfortable fit on your wrist. Ensure the watch is not too tight to allow for proper circulation.

4. Operating Your Watch

4.1. Wearing the Watch

Wear your Stauer watch on your wrist, ensuring the band is securely fastened. The watch is suitable for daily wear and complements both formal and casual attire.

4.2. Water Resistance

The watch is designed to be water-resistant. This means it can withstand splashes, rain, and brief immersion in water, such as washing hands. It is not suitable for swimming, diving, or prolonged exposure to water. Avoid operating the crown while the watch is wet to prevent water ingress.

5. Maintenance

5.1. Cleaning Your Watch

To maintain the appearance of your watch, wipe the case and crystal with a soft, dry, lint-free cloth. For the leather band, avoid excessive moisture and harsh chemicals. If the band becomes soiled, gently wipe it with a slightly damp cloth and allow it to air dry completely.

5.2. Battery Replacement

The watch is powered by one LR44 battery (included). When the watch stops running or its accuracy diminishes, the battery may need replacement. It is recommended to have battery replacement performed by a qualified watch technician to ensure proper sealing and prevent damage to the movement or water resistance.

Figure 5.1: Rear view of the watch case, showing the case back which would be opened for battery access.

6. Troubleshooting

• Watch Not Running:
  • Check if the crown is fully pushed in. If it is pulled out, the watch will not run.
  • The battery may be depleted. Refer to Section 5.2 for battery replacement.
• Incorrect Time Display:
  • Reset the time as described in Section 3.1.
  • If the hands do not move correctly or are misaligned after setting, this may indicate a mechanical issue.
• Water Inside the Watch:
  • If condensation or water droplets appear inside the crystal, immediately seek professional watch repair. Do not attempt to dry it yourself, as this can cause further damage.

For issues not resolved by the above steps, or for any complex repairs, it is recommended to contact Stauer customer support or a certified watch repair specialist.

7. Specifications

8. Warranty and Support

For information regarding warranty coverage, terms, and conditions for your Stauer 1920s Retrograde Watch Model 55092, please refer to the documentation included with your purchase or visit the official Stauer website. For customer support, service inquiries, or to locate authorized repair centers, please contact Stauer directly through their official channels.

Manufacturer: Stauer