1. Introduction and Safety Information
This manual provides essential information for the safe installation, operation, and maintenance of your WOODBRIDGE BJ-600 Whirlpool and Air Bath Heated Soaking Combination Tub. Please read all instructions carefully before installation and use. Retain this manual for future reference.
Important Safety Instructions:
- Electrical Safety: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. The tub requires a dedicated 120V 30AMP breaker. Ensure proper grounding.
- Water Temperature: Do not exceed 104°F (40°C). Prolonged immersion in hotter water can cause hyperthermia.
- Children: Supervise children at all times when they are near or in the tub.
- Health Conditions: Consult a physician before use if you have heart disease, high blood pressure, diabetes, or are pregnant.
- Chemicals: Use only recommended cleaning agents. Avoid abrasive cleaners or solvents that can damage the tub surface or components.
- No Unauthorized Modifications: Do not modify the tub or its components. This may void the warranty and create safety hazards.
2. Product Features
The WOODBRIDGE BJ-600 combines whirlpool and air bath functions with a heated soaking feature for an enhanced bathing experience.
- Whirlpool Jets: 6 adjustable body massage jets provide a concentrated hydro-massage. These jets can be adjusted 360 degrees to target specific areas.
- Air Bubble Jets: 10 whirlpool bubble bath jets deliver a gentle, effervescent full-body massage. The air bubble intensity is adjustable with three speed settings.
- Inline Heater: Maintains the water temperature during your bath, allowing for extended soaking without the need to add more hot water.
- Chromotherapy Lighting: Features an underwater multi-color LED light to enhance the bathing ambiance.
- Control Panel: An intuitive LED display panel manages all functions, including power, chromotherapy, wave massage, thermostat, and air bubble settings.
- Construction: Made from 100% high gloss white LUCITE acrylic, reinforced with ASHLAND resin and fiberglass for durability and a seamless design.
3. Setup and Installation
Proper installation is crucial for the safe and efficient operation of your bathtub. It is recommended that installation be performed by licensed professionals.
Pre-Installation Checklist:
- Verify all components are present: Bathtub, pre-assembled chrome finish drain and overflow, user guide.
- Ensure the installation area meets the required dimensions and weight capacity.
- Confirm electrical supply meets specifications: 1 Dedicated 120V 30AMP Breaker.
- Prepare plumbing for hot and cold water supply and drainage.
Dimensions:
- Exterior Dimension: 72" L x 35-3/8" W x 22-7/8" H
- Seating Dimension: 47-1/4" L x 23-5/8" W
- Water Depth to Overflow: 13-3/4" D
- Effective Tub Capacity: 74 Gallons
4. Operating Instructions
Familiarize yourself with the control panel to operate the tub's features.
Control Panel Overview:
- Power ON/OFF: Press the power button to turn the tub system on or off.
- Chromotherapy: Press the chromotherapy button to activate the underwater LED lighting. Cycle through colors or set to a specific color.
- Wave Massage: Activates a pulsating jet action.
- Thermostat: Use the thermostat setting to adjust and maintain your desired water temperature.
- Air Bubble: Activates the air jets. Press repeatedly to cycle through High, Medium, and Low speeds, then off.
- Navigation/OK: Use the arrow buttons to navigate menu options and the OK button to confirm selections.
Using the Air Blower:
The air blower provides a gentle massage. To operate:
- Press the Air Blower button on the control panel. It will start at the highest speed.
- Press again for medium speed.
- Press again for low speed.
- Press a fourth time to turn off the blower.
5. Maintenance and Cleaning
Regular maintenance ensures the longevity and hygienic operation of your tub.
General Cleaning:
- Clean the tub surface with a soft cloth and a non-abrasive, mild bathroom cleaner.
- Avoid cleaners containing ammonia, bleach, or abrasive particles, as these can damage the acrylic finish.
- Rinse thoroughly after cleaning to remove any residue.
Jet and Plumbing System Cleaning:
To prevent buildup in the jet and plumbing system:
- Fill the tub with warm water above the jets.
- Add 2-3 tablespoons of a low-foaming dishwasher detergent or a specialized jetted tub cleaner.
- Run the whirlpool jets for 10-15 minutes.
- Drain the tub and refill with clean water.
- Run the jets again for 5 minutes to rinse the system.
- Drain the tub completely.
6. Troubleshooting
Refer to this section for common issues and their potential solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Tub does not power on. | No power supply; GFCI tripped; loose wiring. | Check circuit breaker and GFCI. Ensure power cord is securely connected. Consult an electrician if issues persist. |
| Jets are weak or not working. | Low water level; clogged jets; pump issue. | Ensure water level is above jets. Clean jets. Check for obstructions. Contact support if pump is suspected. |
| Heater not maintaining temperature. | Heater element malfunction; incorrect setting. | Verify thermostat setting. Ensure water level is adequate. Contact support if heater is faulty. |
| Air blower not working or weak. | Blower motor issue; clogged air intake. | Check for obstructions in air intake. Cycle through speed settings. Contact support if motor is faulty. |
| Water leaks from tub. | Loose drain fitting; damaged plumbing. | Inspect drain and overflow connections. Tighten if loose. Contact a plumber for damaged plumbing. |
If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact WOODBRIDGE customer support.
7. Specifications
| Attribute | Detail |
|---|---|
| Model Number | BJ-600 |
| Exterior Dimensions | 72" L x 35-3/8" W x 22-7/8" H |
| Effective Tub Capacity | 74 Gallons |
| Water Depth to Overflow | 13-3/4" D |
| Material | Acrylic (LUCITE) with Fiberglass Reinforcement |
| Power Requirements | 1 Dedicated 120V 30AMP Breaker |
| Jets | 6 Adjustable Body Massage Jets, 10 Whirlpool Bubble Bath Jets |
| Heater | Inline Heater |
| Certifications | UL1795, ASME A112.19.7/CSA B45.10, CSA B45.5/IAPMO Z124, CSA C22.2 No.218. IPC and NPC. |
| Included Components | Bathtub, Pre-assembled chrome finish drain and overflow |
8. Warranty and Support
Warranty Information:
WOODBRIDGE Hydromassage bathtubs are certified to UL1795 and comply with various industry standards. An additional 1-year warranty is available upon product registration on the official WOODBRIDGE website. Please refer to the warranty card included with your product for full terms and conditions.
Customer Support:
For technical assistance, parts, or warranty claims, please contact WOODBRIDGE customer support. Contact information can typically be found on the WOODBRIDGE website or in the documentation provided with your purchase.
Online Resources: For additional information and support, visit the official WOODBRIDGE website.
