Faymart Lighting 8-inch White Round LED Bulkhead Light Instruction Manual

Introduction

Thank you for choosing the Faymart Lighting 8-inch White Round LED Bulkhead Light. This fixture is designed for reliable performance in various environments, including outdoor and wet locations. Its robust construction and energy-efficient LED technology provide consistent, warm white illumination. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Image: The Faymart Lighting 8-inch White Round LED Bulkhead Light, showcasing its round design and protective cage.

What's in the Box

• 1 x 8-inch White Round Nautical Bulkhead Light
• Mounting Accessories (screws, wire nuts, mounting bracket)
• Instruction Manual

Specifications

Image: A graphic detailing the product's electrical specifications: 15W, 3000K Warm White, 1500 LM, CRI≥80, and 120 Volts (AC).

Image: A diagram illustrating the product dimensions, showing a diameter of 7.88 inches (20 cm) and a thickness of 4.06 inches (10.3 cm).

Safety Information

• Always turn off the power at the circuit breaker before installation or maintenance.
• Consult a qualified electrician if you are unsure about the installation process.
• Ensure all electrical connections are secure and comply with local electrical codes.
• Do not attempt to modify the fixture. Any modifications may void the warranty and create a safety hazard.
• This fixture is suitable for wet locations. Ensure all seals are properly seated during installation to maintain water resistance.

Installation

Tools Required:

• Screwdriver (Phillips head)
• Wire strippers
• Pliers
• Electrical tape (optional)
• Safety glasses

Mounting Instructions:

1. Turn off Power: Before beginning, ensure the power to the installation area is turned off at the circuit breaker.
2. Prepare Mounting Surface: If replacing an existing fixture, remove it and ensure the junction box is clean and accessible.
3. Attach Mounting Bracket: Secure the provided mounting bracket to the junction box using the screws. Ensure it is firmly attached.
4. Make Electrical Connections: Connect the fixture's wires to your household wiring. Match black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground). Use the provided wire nuts and secure connections with electrical tape if desired.
5. Mount the Fixture Base: Align the fixture base with the mounting bracket and secure it with the provided screws. Ensure a tight seal against the mounting surface to maintain water resistance.
6. Install Glass Shade and Cage: Carefully place the frosted glass shade into the fixture. Then, align the aluminum cage over the glass and secure it with the screws on the sides of the fixture.
7. Restore Power: Once installation is complete, turn the power back on at the circuit breaker and test the light fixture.

Image: A close-up view of the internal components, including the built-in LED panel and wiring connections, demonstrating the fixture's design.

Operation

This LED bulkhead light operates via a standard wall switch (not included). Simply toggle the switch to turn the light on or off. The built-in LED provides instant warm white illumination.

Maintenance

• Cleaning: To clean the fixture, ensure the power is off. Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or glass.
• LED Light Source: This fixture features a built-in LED light source with a long lifespan of approximately 50,000 hours. The LED is not user-replaceable. If the LED fails, the entire fixture may need replacement.
• Inspection: Periodically inspect the fixture for any signs of damage, loose connections, or wear. Address any issues promptly to ensure continued safe operation.

Image: The bulkhead light shown in an outdoor setting, highlighting its resistance to various weather conditions like high heat, rain, snow, storm, and wind.

Troubleshooting

Warranty and Support

Faymart Lighting products are manufactured to high-quality standards. For warranty information, technical support, or assistance with your product, please refer to the contact information provided on the product packaging or visit the official Faymart Lighting website. Please retain your proof of purchase for any warranty claims.