Artisan Power 709-100
Artisan Power Replacement Battery for Heiniger Opal and Sirius Clippers
Model: 709-100
1. Introduction
This manual provides comprehensive instructions for the Artisan Power replacement battery designed for Heiniger Opal and Sirius hair clippers. It covers installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your battery. Please read this manual thoroughly before using the product.
2. Important Safety Information
To prevent injury or damage to your battery and clipper, always observe the following safety precautions:
- Do not disassemble, open, or shred the battery pack.
- Do not expose the battery to heat or fire. Avoid storage in direct sunlight.
- Do not short-circuit the battery.
- Do not expose the battery to mechanical shock.
- In case of battery leakage, do not allow the liquid to come into contact with skin or eyes. If contact has occurred, wash the affected area with copious amounts of water and seek medical advice.
- Keep the battery clean and dry.
- Do not use any charger other than that specifically provided for use with the equipment.
- Dispose of the battery properly according to local regulations. Do not dispose of with household waste.
- Keep out of reach of children.
3. Product Overview
The Artisan Power replacement battery is engineered to provide reliable and extended power for your Heiniger Opal and Sirius hair clippers. It features a 7.2 Volt Lithium-Ion cell with a 3450 mAh capacity, offering 21% higher capacity compared to standard OEM replacements. This results in longer operational times per charge and an extended overall battery lifespan.

Image of the Artisan Power replacement battery for Heiniger clippers, showing its blue base and gold-plated contacts.
A convenient blue LED indicator is integrated into the battery to display the current charge level at a glance, allowing you to monitor battery status easily. The battery is designed with distinctive blue plastics on the base and side clips for easy identification and secure fitting.

Image of the Artisan Power battery displaying its blue LED charge indicator lights on the side.

Image highlighting the Artisan Power battery as a superior replacement, detailing its high-quality Li-ion cells, gold-plated contacts, and 21% higher capacity, alongside illustrations of Heiniger clippers.

Image emphasizing the battery's distinctive blue base and side locking clips, along with icons for antimicrobial plastics and flame retardant shielding.

Image illustrating the battery's LED indicator for charge level, demonstrating how it provides visible feedback on battery life and longer clipper run time.
4. Compatibility
This Artisan Power replacement battery is specifically designed for use with the following hair clipper models:
- Heiniger Opal Hair Clippers
- Heiniger Sirius Hair Clippers
It directly replaces Heiniger battery model number 709-100.
5. Installation Guide
Follow these steps to replace the battery in your Heiniger Opal or Sirius hair clippers:
- Power Off Clipper: Ensure your hair clipper is completely turned off before beginning the battery replacement process.
- Locate Battery Compartment: Identify the battery compartment on your Heiniger clipper. Refer to your clipper's original manual if you are unsure of its location.
- Remove Old Battery: Carefully open the battery compartment and remove the existing battery.
- Insert New Battery: Insert the Artisan Power replacement battery into the compartment, ensuring the contacts align correctly. The blue plastics on the base and side clips should fit securely.
- Secure Compartment: Close and secure the battery compartment.
- Initial Charge: For optimal performance, fully charge the new battery before its first use.
6. Operation and Charging
The Artisan Power battery is designed to be charged using your existing Heiniger clipper charger. Connect the clipper with the installed Artisan Power battery to its charger and a power source.
LED Charging Indicator:
The battery features a blue LED light indicator on its side. These lights illuminate to show the current charge level:
- Solid Blue Lights: Indicate the battery's charge level. More lights mean a higher charge.
- Flashing Blue Lights: Typically indicate that the battery is currently charging.
- No Lights: The battery may be fully discharged or not properly connected.
Always ensure the battery is fully charged before extended use to maximize run time.
7. Maintenance and Storage
Proper maintenance and storage will extend the life of your Artisan Power battery:
- Avoid Extreme Temperatures: Do not expose the battery to very high or very low temperatures. Store it in a cool, dry place.
- Partial Charge for Storage: If storing the battery for an extended period (more than a month), it is recommended to store it with a partial charge (around 50-70%) rather than fully charged or fully discharged.
- Clean Contacts: Periodically clean the battery contacts with a dry cloth to ensure good electrical connection.
- Avoid Deep Discharge: While Lithium-Ion batteries are robust, consistently running them until completely dead can reduce their overall lifespan. Recharge when the charge indicator shows low power.
8. Troubleshooting
If you encounter issues with your Artisan Power replacement battery, refer to the following table:
| Issue | Possible Cause | Solution |
|---|---|---|
| Battery not charging | Charger not connected properly; faulty charger or power outlet; battery not seated correctly. | Ensure charger is fully plugged into both the clipper and the power outlet. Test the charger with another device or try a different outlet. Re-insert the battery to ensure proper contact. |
| Clipper stops unexpectedly or has reduced run time despite indicator showing charge | Inaccurate LED indicator; battery not fully charged; battery nearing end of life. | Ensure the charger is fully plugged in and making proper contact. Allow for a full charge cycle. If issues persist, the battery may need replacement. |
| LED indicator lights not working | Battery fully discharged; internal fault. | Attempt to charge the battery. If no lights appear after a period of charging, contact customer support. |
If troubleshooting steps do not resolve the issue, please contact Artisan Power customer support for further assistance.
9. Specifications
- Brand: Artisan Power
- Model Number: 709-100 (Replacement)
- Battery Type: Lithium Ion
- Voltage: 7.2 Volts
- Capacity: 3450 mAh (Milliamp Hours)
- Item Weight: Approximately 5 ounces
- Package Dimensions: 3.54 x 2.32 x 2.24 inches
- Manufacturer: Artisan Power
10. Warranty and Support
Artisan Power is committed to providing high-quality replacement batteries. For specific warranty details, terms, and conditions related to your purchase, please refer to the documentation included with your product or visit the official Artisan Power website. Keep your purchase receipt as proof of purchase for any warranty claims.
For technical support, troubleshooting assistance, or any other inquiries, please contact Artisan Power customer service through their official website or the retailer from whom you purchased the product.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.