1. Introduction
This manual provides essential information for the identification and proper use of your Yale Lock F0155 Replacement Key. This key is designed to replace lost or damaged keys for Yale locks within the F0001-F1600 series.
2. Product Description
The Yale Lock F0155 Replacement Key is a custom-cut key designed for specific Yale lock systems. It is cut on a Y6 key blank and is identified by the F0155 code. The key code is crucial for ensuring compatibility with your lock.
Image 1: The Yale Lock F0155 Replacement Key. This image shows the brass-colored key with "MADE IN U.S.A." and "F0155" stamped on its head, and the distinct bitting of the key blade.
3. Key Identification and Setup
To ensure you have the correct replacement key, verify the lock code. The lock code determines the correct key for your lock and will be stamped on your original key or on the face of your lock if the original key is lost.
- Locate the Lock Code: Examine your existing Yale key or the face of your Yale lock for a stamped code. This code will typically be in the F0001-F1600 series.
- Match the Code: Confirm that the code on your lock or original key matches "F0155" for this replacement key.
- Test Fit: Gently insert the replacement key into the lock cylinder. It should slide in smoothly without excessive force.
Note: If the key does not fit or turn smoothly, do not force it. Forcing an incorrect key can damage the lock mechanism.
4. Operating the Key
Using the Yale Lock F0155 Replacement Key is straightforward:
- Insertion: Insert the key fully into the lock's keyway.
- Turning: Rotate the key clockwise or counter-clockwise, depending on the lock's mechanism, to engage or disengage the locking bolt.
- Removal: Once the lock is operated, return the key to its original insertion position (usually vertical) before withdrawing it.
5. Maintenance
Proper maintenance ensures the longevity of your key and lock:
- Keep Clean: Periodically wipe the key with a dry cloth to remove dirt or debris.
- Avoid Harsh Chemicals: Do not use abrasive cleaners or solvents on the key, as they can damage the metal finish.
- Lubrication (Lock): If the lock mechanism becomes stiff, apply a small amount of graphite-based lubricant specifically designed for locks into the keyway, not directly onto the key.
- Storage: Store the key in a dry place to prevent corrosion.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Key does not insert smoothly. | Incorrect key code, debris in keyway, bent key. | Verify key code (F0155) matches lock. Check keyway for obstructions. Inspect key for damage. |
| Key turns but lock does not operate. | Internal lock mechanism issue, worn key. | Consult a locksmith. If key is old, consider a new replacement. |
| Key is difficult to remove. | Lock mechanism stiffness, key not fully aligned. | Ensure key is in the correct removal position (vertical). Apply lock lubricant to the lock's keyway. |
7. Specifications
- Product Name: Yale Lock F0155 Replacement Key
- Brand: EasyKeys
- Model Series: F0001-F1600
- Key Code: F0155
- Key Blank Type: Y6
- Material: Brass (typical for keys)
- Item Weight: 0.247 ounces (approx. 7 grams)
- Manufacturer: Yale Lock
8. Warranty and Support
For questions, support, or to inquire about returns, please contact EasyKeys Inc. directly through the retailer where the product was purchased. Standard return policies typically allow for returns or replacements within 30 days of purchase, subject to the retailer's terms and conditions.
For further assistance, please refer to the contact information provided by your point of purchase or visit the EasyKeys Store on Amazon.