Polibi 6-Piece Wood Dining Table Set Instruction Manual

Introduction

This manual provides instructions for the assembly, operation, and maintenance of your Polibi 6-Piece Wood Dining Table Set. This set includes one rectangular dining table, four upholstered chairs with rattan backs, and one upholstered bench. Designed with a retro farmhouse style, this dining set is intended for indoor use in dining rooms, kitchens, or living areas.

Image: The Polibi 6-Piece Wood Dining Table Set, featuring a natural wood wash table, four chairs with rattan backs and upholstered seats, and a matching upholstered bench, arranged in a dining room.

Package Contents

Before beginning assembly, ensure all components are present and undamaged. If any parts are missing or damaged, contact customer support.

• 1 x Rectangular Dining Table
• 4 x Dining Chairs
• 1 x Dining Bench
• Hardware Pack (screws, bolts, washers, Allen wrench)
• Assembly Instructions

Setup and Assembly

Assembly is required for this dining set. It is recommended to have two adults for assembly. Clear a spacious area and place all components on a soft, clean surface to prevent scratches.

Tools Required (Not Included):

• Phillips Head Screwdriver
• Rubber Mallet (optional, for gentle tapping)

General Assembly Steps:

1. Unpack Components: Carefully remove all parts from the packaging and identify them against the parts list in the included assembly instructions.
2. Assemble the Dining Table:
   • Attach the table legs to the tabletop using the provided hardware.
   • Secure any crossbars or support structures between the legs.
   • Ensure all connections are tightened securely, but do not overtighten until all parts are aligned.
3. Assemble the Dining Chairs:
   • Attach the chair legs to the seat frame.
   • Connect the backrest to the seat frame and legs.
   • Install any additional support braces.
   • Attach the upholstered seat cushion.
4. Assemble the Dining Bench:
   • Attach the bench legs to the bench frame.
   • Secure any crossbars or support structures.
   • Attach the upholstered bench cushion.
5. Final Tightening: Once all components are assembled, place the furniture upright and gently rock it to ensure stability. Then, fully tighten all screws and bolts. Do not overtighten.

Image: An overview showing the Polibi 6-piece dining set, highlighting the table, four chairs, and bench, indicating it's suitable for various room types like kitchen, dining room, and living room.

Operating Instructions

This dining set is designed for seating and dining purposes. Ensure proper use to maintain its integrity and safety.

• Weight Capacity: The dining table has a maximum load-bearing capacity of 300 lbs. Each chair and the bench have a maximum load-bearing capacity of 250 lbs. Do not exceed these limits.
• Placement: Place the dining set on a flat, level surface to prevent wobbling.
• Movement: When moving the table or chairs, lift them rather than dragging to prevent damage to the legs or floor.
• Heat Protection: Always use placemats or coasters under hot dishes to protect the tabletop surface from heat damage.

Maintenance and Care

Proper care will extend the life and appearance of your dining set.

• Cleaning: Wipe the wood surfaces with a dry cloth. For upholstered parts, spot clean with a mild fabric cleaner as needed. Avoid harsh chemicals or abrasive cleaners.
• Spills: Clean spills immediately to prevent staining, especially on upholstered surfaces.
• Sunlight Exposure: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration of wood and fabric.
• Humidity: Maintain a stable humidity level in the room to prevent wood from warping or cracking.
• Hardware Check: Periodically check and tighten all hardware connections to ensure stability and safety.

Image: This image highlights the durable construction of the dining table, featuring high-quality MDF with OAK veneer, a Y-shaped crossbar design for stability, and rubber wood legs. It also indicates a 300 lbs load capacity for the tabletop.

Image: This image showcases the comfort features of the dining chairs and bench, including selected rattan for the chair back, an ergonomic curved contour design, and high-density sponge wrapped in beige linen for soft, comfortable seating. It also indicates a 250 lbs load capacity for the chairs and bench.

Troubleshooting

If you encounter issues with your dining set, refer to the following common solutions:

• Wobbling Table/Chairs:
  • Ensure all bolts and screws are securely tightened.
  • Verify the furniture is placed on a level surface.
  • Adjust leg levelers if present (not specified, but common).
• Loose Connections:
  • Re-tighten all hardware. Avoid overtightening, which can strip screws or crack wood.
• Scratches/Dents:
  • For minor scratches, wood repair markers or furniture polish may be used. Consult a professional for significant damage.

Specifications

Image: A technical drawing showing the precise dimensions of the dining table (72"L x 36"W x 30"H), the bench (47.5"L x 14.5"W x 20"H), and the dining chairs (20"L x 22.5"W x 32"H).

Image: This image displays two color options for the dining set: Gray and Natural Wood Wash, demonstrating how the set can accommodate 6 people.

Warranty Information

Specific warranty details for the Polibi 6-Piece Wood Dining Table Set are not provided in this manual. Please refer to the product packaging, the seller's website, or contact Polibi customer support directly for comprehensive warranty information.

Customer Support

For assistance with assembly, missing parts, or any other product-related inquiries, please contact Polibi customer support through the retailer where the product was purchased or visit the official Polibi website.

You can visit the Polibi Store on Amazon: Polibi Store