Introduction
Thank you for choosing Amico 5/6 Inch Retrofit Eyeball Gimbal LED Recessed Lights. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting fixtures. Please read these instructions thoroughly before installation and retain them for future reference.
Image: Amico 6 inch Gimbal LED 5CCT Can Lights installed in a modern bedroom setting, showcasing their adjustable nature and aesthetic appeal.
Important Safety Information
Always follow basic safety precautions when installing or working with electrical products. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing.
- WARNING: Risk of fire. Use only in circuits specified in these instructions.
- Do not use with smart dimmers, as flickering issues may occur.
- Ensure the fixture is securely mounted to prevent falling.
- Do not attempt to modify the fixture. Any modifications may void the warranty and create safety hazards.
Setup and Installation
These 5/6 inch LED recessed lights are designed for simple retrofit installation into existing can housings with an E26 base. Installation can typically be completed without the need for an electrician.
Pre-Installation Steps
- Turn off power: Ensure power to the existing fixture is turned off at the circuit breaker.
- Remove existing trim and bulb: Carefully remove the old recessed light trim and unscrew the existing bulb from the can.
- Select Color Temperature (CCT): Before installation, use the switch on the fixture to select your desired color temperature (2700K, 3000K, 4000K, 5000K, or 6000K). This setting cannot be changed after installation without removing the fixture.
Image: A close-up view of the Amico LED recessed light, highlighting the 5 CCT (Correlated Color Temperature) selectable switch for adjusting light warmth.
Installation Procedure
- Screw in Adapter: Screw the E26 adapter into the existing can's socket.
- Connect TP24 Connector: Connect the TP24 connector from the fixture to the adapter.
- Squeeze Springs: Squeeze the torsion springs on the sides of the fixture and insert them into the C-clips inside the can.
- Push into Can: Gently push the entire fixture upwards into the can until it sits flush with the ceiling.
Image: A visual guide illustrating the four steps for installing the Amico LED recessed light: snapping the spring, screwing in the E26 base, connecting the TP24 connector, and adjusting the angle.
Installation Video Guide
Video: A step-by-step video demonstration on how to install the Amico 5/6 Inch 5CCT LED Recessed Lighting fixture into an existing can.
Operating Instructions
Adjustable Gimbal Feature
The Amico Retrofit Eyeball Gimbal Can Lights feature an adjustable lens, allowing you to direct light precisely where needed. The optic can be tilted up to 45 degrees vertically and swiveled a full 360 degrees horizontally.
- Vertical Tilt: Gently push the inner eyeball to tilt the light up to 45 degrees.
- Horizontal Swivel: Rotate the inner eyeball to swivel the light 360 degrees.
Image: A diagram illustrating the adjustable direction capabilities of the Amico recessed light, showing a 45-degree vertical tilt and a 360-degree horizontal swivel.
Dimmable Functionality
These lights are designed for smooth dimming from 10% to 100% brightness. They are compatible with most standard dimmers on the market. Note: It is not recommended to use smart dimmers, as they may cause flickering.
Image: A visual representation of the dimming range, showing the Amico LED lights can be adjusted from 10% to 100% brightness.
Image: A table listing various compatible dimmer models from brands like Lutron and Leviton, indicating their star rating for compatibility with Amico LED lights.
Maintenance
Amico LED recessed lights require minimal maintenance. Follow these guidelines to ensure longevity and optimal performance:
- Cleaning: Ensure power is off before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use harsh chemicals or abrasive cleaners, as they may damage the finish or electrical components.
- Inspection: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and contact a qualified electrician or Amico support.
- Bulb Replacement: These are integrated LED fixtures; the LED light source is not user-replaceable. The fixture is designed for a long operational life.
Troubleshooting
If you encounter issues with your Amico LED recessed lights, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to the fixture, loose connection, faulty fixture. | Check circuit breaker. Ensure all connections (E26 adapter, TP24 connector) are secure. If problem persists, contact support. |
| Light flickers | Incompatible dimmer switch (e.g., smart dimmer), loose wiring. | Ensure you are using a compatible dimmer (not a smart dimmer). Check wiring connections. |
| Incorrect color temperature | CCT switch set incorrectly. | Turn off power, carefully remove fixture, adjust CCT switch to desired setting, and reinstall. |
Product Specifications
Detailed specifications for the Amico 5/6 Inch Retrofit Eyeball Gimbal LED Recessed Lights:
| Feature | Detail |
|---|---|
| Brand | Amico |
| Model Number | 850060697975 |
| Size | 6 Inch (fits 5 or 6 inch cans) |
| Color Temperature (CCT) | 5 CCT Selectable (2700K, 3000K, 4000K, 5000K, 6000K) |
| Brightness | 1500 Lumens |
| Wattage | 16 Watts (equivalent to 150W halogen) |
| Voltage | 120 Volts |
| Material | Metal aluminum |
| Dimming | 10%-100% Smoothly Dimmable (compatible with most dimmers, not smart dimmers) |
| Adjustable Angle | 45° Vertical Tilt, 360° Horizontal Swivel |
| Installation Type | Retrofit (E26 base) |
| Indoor/Outdoor Usage | Indoor |
| Certifications | ETL, FCC |
| Product Dimensions | 7.35"L x 7.35"W x 2.67"H |
| Item Weight | 7.56 pounds (for 6-pack) |
Image: A detailed diagram outlining the dimensions (7.4in diameter, 4.9in inner diameter, 1in thickness) and electrical specifications (16W, 1500LM, 120V) of the Amico LED recessed light.
Warranty Information
Amico provides a 2-year limited manufacturer's support for this product. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications.
For warranty claims or further details, please contact Amico customer support.
Customer Support
If you have any questions, require technical assistance, or need to report an issue with your Amico product, please contact our customer support team. We aim to provide a quick response within 24 hours.
Please refer to the contact information provided with your purchase or visit the official Amico website for support options.
Image: Amico customer support details, highlighting 2-year limited manufacturer's support and a 24-hour quick response service.
