VECELO T5-QB11-BGE

VECELO Queen Upholstered Bed Frame with LED Lights and Charging Station

Model: T5-QB11-BGE | Brand: VECELO

Introduction

Thank you for choosing the VECELO Queen Upholstered Bed Frame. This manual provides essential information for the safe assembly, operation, and maintenance of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Important Safety Information

  • This bed frame is intended for bedroom and hotel use only.
  • Do not exceed the maximum weight capacity of 800 pounds.
  • Always follow the assembly instructions carefully to ensure stability and safety.
  • Ensure all connections are secure before use. Periodically check and tighten all bolts.
  • Keep small parts away from children during assembly.

Package Contents

Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact VECELO customer support.

  • Upholstered Headboard with LED Lights and Charging Station
  • Side Rails (Left and Right)
  • Center Support Beam
  • Wooden Slats (with Velcro and EVA noise-free strips)
  • Support Legs
  • Hardware Kit (bolts, washers, Allen wrench)
  • Installation Manual
Diagram of VECELO Queen Bed Frame components with dimensions

Figure 1: Overview of bed frame components and dimensions. Note the 800 lbs weight capacity and the 'No Box Spring Needed' feature.

Setup and Assembly Instructions

Assembly typically requires two adults and takes approximately 30 minutes. All necessary tools are included in the hardware kit.

  1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface to prevent scratches. Identify each part using the provided parts list in the installation manual.
  2. Attach Headboard Legs: Secure the support legs to the upholstered headboard using the provided bolts and Allen wrench. Ensure they are firmly tightened.
  3. Assemble Side Rails: Connect the side rails to the headboard and footboard (if applicable) using the designated hardware. The side rails feature EVA silent strips and Velcro for noise reduction and easier slat installation.
  4. Install Center Support: Attach the center support beam and its legs to the bed frame. This provides additional stability and weight distribution.
  5. Place Wooden Slats: Unroll the wooden slats across the bed frame. The slats are designed with Velcro to secure them in place and prevent movement, contributing to a noise-free design.
  6. Final Checks: Double-check all bolts and connections to ensure they are tight and secure.
Close-up images showing noise-free design with EVA strips and Velcro, convenient Velcro for slats, and strong support with wooden slats and metal middle foot.

Figure 2: Details of the noise-free design, convenient Velcro for slat installation, and strong support structure.

Operating Instructions

LED Lights

The integrated LED lights in the headboard offer customizable ambiance for your bedroom. They can be controlled via a switch, remote control, or a smartphone application.

  • Power On/Off: Use the inline switch or the remote control to turn the LED lights on or off.
  • Color Selection: Choose from 7 different colors using the remote or smartphone app.
  • Brightness Adjustment: Adjust the light intensity to your preference.
  • Modes: Explore various lighting modes, including static colors, dynamic changes, and music sync options (if available via app).
Image showing a bed with LED lights in the headboard, a remote control, and a smartphone app interface for controlling multiple colors, music modes, timing function, brightness, statics, and dynamic light settings.

Figure 3: LED light features and control options via remote and smartphone app.

Charging Station

The headboard includes a convenient charging station to power your electronic devices.

  • USB Ports: Utilize the built-in USB and Type-C ports to charge tablets, phones, or other compatible electronics.
  • Power Connection: Ensure the bed frame's power cord is securely plugged into a functional wall outlet for the charging station to operate.
Close-up of the bed headboard showing a tablet and phone charging via Type-C and USB ports integrated into the headboard.

Figure 4: Integrated Type-C and USB charging ports in the headboard.

Adjustable Headboard

The upholstered headboard offers three levels of height adjustment to accommodate various mattress thicknesses.

  • Height Range: The headboard height can be adjusted from 39.8 inches to 47.6 inches.
  • Mattress Compatibility: This adjustment makes the bed frame suitable for mattresses between 4 and 14 inches thick.
  • Adjustment: Refer to the detailed assembly instructions for specific steps on adjusting the headboard height during or after initial setup.
Image illustrating the adjustable height feature of the velvet headboard, showing two different height settings (39.8in and 47.6in) and highlighting skin-friendly, breathable, and soft-touch velvet material.

Figure 5: Adjustable headboard height and velvet material properties.

Maintenance

Regular maintenance will help prolong the life and appearance of your VECELO bed frame.

  • Cleaning: For the velvet upholstery, gently vacuum with a soft brush attachment to remove dust. For spills, blot immediately with a clean, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Hardware Check: Periodically (every 3-6 months) check all bolts and screws to ensure they are tight. Re-tighten if necessary to maintain stability and prevent squeaking.
  • Slats: Ensure wooden slats are properly seated and not damaged. Replace any broken slats immediately to maintain mattress support.
  • LED Lights: Keep the LED strip clean and free from dust. Avoid bending or damaging the light strip.
  • Charging Ports: Keep USB and Type-C ports free of dust and debris.

Troubleshooting

If you encounter any issues with your bed frame, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Bed frame is wobbly or squeaks.Loose bolts or uneven assembly.Check and tighten all bolts. Ensure the bed frame is on a level surface. Verify slats are properly installed.
LED lights are not working.Power connection issue, remote battery, or damaged LED strip.Ensure the power adapter is securely plugged into the wall and the bed frame. Check the inline switch. Replace remote batteries. If issues persist, contact customer support.
Charging ports are not functioning.Power connection issue or device incompatibility.Verify the bed frame is powered. Test with a different device and cable. Ensure your device is compatible with USB charging.

Specifications

  • Model Number: T5-QB11-BGE
  • Size: Queen
  • Material: Metal, Velvet, Wood
  • Product Dimensions (L x W x H): 81.3" x 60.2" x 14" (Frame height)
  • Adjustable Headboard Height: 39.8" - 47.6"
  • Recommended Mattress Thickness: 4 - 14 inches
  • Weight Capacity: 800 Pounds
  • Style: Modern
  • Special Features: Adjustable Headboard, No Box Spring Needed, Squeak Resistant, LED Lights, Charging Station (USB & Type-C)
  • Assembly Required: Yes
Detailed diagram of the VECELO Queen bed frame with all dimensions labeled, including length, width, height, and headboard adjustability.

Figure 6: Comprehensive dimensions and features of the Queen size bed frame.

Warranty and Support

VECELO is committed to providing quality products. This product typically includes a 30-day return policy from the date of purchase. For specific warranty details, product support, or to report missing/damaged parts, please refer to the warranty card included with your purchase or contact VECELO customer service directly through their official website or the retailer where the product was purchased.

For further assistance, please visit the VECELO Store on Amazon.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.