1. Introduction
Thank you for choosing the treewell THRS13A Remote Control Outlet. This manual provides important information regarding the safe installation, operation, and maintenance of your device. Please read this manual thoroughly before use and retain it for future reference.
Important Safety Information
- Do not exceed the maximum wattage rating of 1875 watts.
- For indoor use only. Do not expose to water or damp conditions.
- Ensure the outlet is fully inserted into the wall socket.
- Do not disassemble or modify the device.
- Keep out of reach of children.
- Unplug from the power source before cleaning.
2. Package Contents
Verify that all items are present in your package:
- 1 x treewell THRS13A Remote Control Outlet
- 1 x Remote Control (with 1 CR2032 battery pre-installed)
- 1 x User Manual
3. Product Overview
The treewell THRS13A Remote Control Outlet allows you to wirelessly control appliances and lights with the included remote control. It features a compact design and a simple interface for ease of use.
Figure 3.1: treewell THRS13A Remote Control Outlet and Remote Control. The image displays the white, rectangular remote control outlet with a three-prong plug and a single power button on its face. Beside it is the smaller, white remote control with a single ON/OFF button.
Components:
- Remote Control Outlet: Plugs into a standard wall outlet. Features a manual ON/OFF button and an indicator light.
- Remote Control: Battery-powered, used to wirelessly switch the outlet ON or OFF.
4. Setup
4.1. Installing the Remote Control Battery
The remote control comes with a CR2032 lithium metal battery pre-installed. If the remote control does not respond, you may need to replace the battery.
- Locate the battery compartment on the back of the remote control.
- Slide open the battery cover.
- Remove the old CR2032 battery and insert a new one with the positive (+) side facing up.
- Close the battery cover securely.
4.2. Connecting the Outlet
- Plug the treewell THRS13A Remote Control Outlet into a standard 3-prong wall socket. The indicator light on the outlet may flash briefly.
- Plug the appliance or device you wish to control into the remote control outlet. Ensure the appliance is switched to its ON position if it has a manual switch.
4.3. Pairing the Remote Control with the Outlet (If necessary)
The remote control and outlet are typically pre-paired from the factory. If they are not responding to each other, follow these steps to re-pair them:
- Ensure the outlet is plugged into a live wall socket.
- Press and hold the manual ON/OFF button on the side of the remote control outlet for approximately 3-5 seconds until the indicator light begins to flash rapidly.
- While the indicator light is flashing, press the "ON" button on your remote control. The indicator light on the outlet should stop flashing and remain solid, indicating successful pairing.
- Test the remote control by pressing the "ON" and "OFF" buttons.
5. Operating Instructions
5.1. Using the Remote Control
- To turn the connected appliance ON: Press the "ON" button on the remote control. The indicator light on the outlet will illuminate.
- To turn the connected appliance OFF: Press the "OFF" button on the remote control. The indicator light on the outlet will turn off.
5.2. Manual Control
You can also control the outlet directly using the manual ON/OFF button on the side of the outlet:
- Press the manual button once to toggle the power ON or OFF.
6. Maintenance
6.1. Cleaning
To clean the remote control outlet and remote, unplug the outlet from the wall and use a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
6.2. Remote Control Battery Replacement
If the remote control's range decreases or it stops responding, replace the CR2032 battery as described in Section 4.1.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Outlet not responding to remote. | Remote battery is low or dead. Outlet and remote are not paired. Obstruction between remote and outlet. | Replace remote battery. Re-pair the remote and outlet (see Section 4.3). Ensure clear line of sight or reduce distance. |
| Appliance not turning ON/OFF. | Appliance is not plugged in correctly. Appliance's own switch is OFF. Outlet is not receiving power. | Check appliance plug connection. Ensure appliance's manual switch is ON. Check wall socket with another device. |
| Outlet indicator light not illuminating. | No power to the wall socket. Outlet is faulty. | Check circuit breaker or try another wall socket. Contact customer support. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | RSL010R (Part Number: THRS13A) |
| Brand | treewell |
| Wattage | 1875 Watts (Max) |
| Switch Type | 1-way, TRIAC |
| Plug Profile | Surface Mount |
| Remote Battery Type | 1 x CR2032 Lithium Metal (included) |
| Operation Mode | Automatic |
| International Protection Rating | IP20 |
| Dimensions (Outlet) | Approx. 13.41 x 7.49 x 4.9 cm |
| Weight | Approx. 200 g |
9. Warranty Information
treewell products are manufactured to the highest quality standards. This product is covered by a limited manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official treewell website for detailed warranty terms and conditions. Keep your purchase receipt as proof of purchase.
10. Customer Support
If you have any questions, require assistance, or encounter issues with your treewell THRS13A Remote Control Outlet, please contact our customer support team. Contact information can typically be found on the treewell official website or on the product packaging.
Note: Product specifications and appearance are subject to change without prior notice.