Introduction
This manual provides essential information for identifying and using your EasyKeys Replacement Key for Hudson K96. Please read these instructions carefully to ensure proper identification and compatibility.
Identifying Your Lock Code
Before using your replacement key, it is crucial to correctly identify the code of your existing lock. The Hudson K96 replacement key is specifically cut for locks with the K96 code. Lock codes are manufacturer-specific, and key cuts differ even if codes appear similar across brands.
Image: Where to Find Your Lock Code
This diagram illustrates common locations where you can find your lock code. These include directly on the key (e.g., FR322), on the face of the lock cylinder (e.g., FR322), on a label inside or behind the lock mechanism (e.g., CODE: G38), or on a label affixed to the cabinet or door itself (e.g., HF321).
You can typically find your lock code in one of the following locations:
- On the Key: The code may be stamped directly onto your existing key.
- On the Lock Face: The code might be engraved or printed on the visible part of the lock cylinder.
- On a Label Inside/Behind the Lock: For some locks, the code is on a sticker or label located on the lock mechanism itself, often requiring removal of the lock or access to the interior of the furniture.
- On the Cabinet/Door Label: Occasionally, the code is found on a label on the furniture or door where the lock is installed.
Ensure the identified code matches "K96" and the manufacturer is Hudson or a compatible brand like Artec Centra. This replacement key is specifically designed for Hudson K96 locks.
Operating Instructions
To operate your lock with the EasyKeys Replacement Key for Hudson K96:
- Insert the Key: Gently insert the K96 replacement key into the lock cylinder. Do not force the key.
- Turn the Key: Once fully inserted, turn the key clockwise or counter-clockwise (depending on your lock mechanism) to engage or disengage the lock.
- Remove the Key: After locking or unlocking, return the key to its original insertion position before removing it.
If the key does not turn smoothly or feels stiff, do not force it. Forcing the key can damage both the key and the lock mechanism.
Maintenance
To ensure the longevity and smooth operation of your replacement key and lock:
- Keep Clean: Keep the key clean and free from dirt, dust, or debris.
- Lubrication: If the lock mechanism becomes stiff, apply a small amount of graphite-based lubricant specifically designed for locks. Avoid oil-based lubricants as they can attract dust.
- Storage: Store the key in a safe place to prevent bending or damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Key does not insert fully. | Obstruction in lock cylinder; incorrect key. | Check for debris in the lock. Verify the key code matches your lock. |
| Key inserts but does not turn. | Incorrect key; worn lock mechanism; stiff mechanism. | Ensure the key code is K96. Apply lock lubricant. If the issue persists, the lock mechanism may need replacement. |
| Key is difficult to remove. | Key not in neutral position; worn lock. | Ensure the key is turned back to the original insertion position. Gently wiggle while pulling. |
Specifications
- Model: K96
- Brand: EasyKeys
- Compatible Manufacturers: Hudson, Artec Centra
- Key Blank Type: IN8
- Material: Brass
- Dimensions (L x W x H): Approximately 0.5 x 0.5 x 1 inches
- Item Weight: Approximately 0.25 Pounds (4 ounces)
- Special Features: Custom Cut Key, Durable
Warranty Information
This product is covered by a standard return policy. For specific details regarding returns or replacements, please refer to the purchase platform's return policy or contact EasyKeys customer support. Typically, a 30-day return window is provided for refunds or replacements.
Customer Support
For further assistance, questions, or support regarding your EasyKeys Replacement Key for Hudson K96, please visit the EasyKeys Store on Amazon or contact their customer service directly through the platform where the purchase was made.
