One For All Big Button Remote Control (URC6821) User Manual

Introduction

This manual provides comprehensive instructions for setting up, operating, and maintaining your One For All Big Button Remote Control (URC6821). Please read this manual carefully before using the device to ensure optimal performance and longevity.

The One For All Big Button remote control is designed for ease of use, combining up to two remote controls into one, including SimpleAudio functionality. It features large, easy-to-press buttons and an ergonomic design for comfortable handling.

Product Overview

Angled view of the One For All Big Button Remote Control, highlighting its ergonomic shape and button layout.

Direct front view of the remote control, clearly showing all large, well-spaced buttons.

Side profile of the remote, illustrating its comfortable, ergonomic design for easy grip.

Detailed view of the prominent blue volume and channel buttons, designed for easy identification and use.

Close-up of the top section of the remote, showing the TV, Power, and STB buttons, which can illuminate for visibility.

Setup

1. Battery Installation

The remote control requires 2x AAA batteries (not included).

1. Open the battery compartment cover on the back of the remote.
2. Insert the batteries, ensuring correct polarity (+ and -).
3. Close the battery compartment cover securely.

2. Initial Setup (SimpleSet)

The One For All Big Button remote control is designed for easy setup in three simple steps.

1. Turn on your TV or the device you wish to control.
2. Press and hold the SETUP button until the LED light on the remote blinks twice and stays lit.
3. Press the TV button (or STB for Set-Top Box) once. The LED will blink once.
4. Point the remote at your device and press the POWER button. If the device turns off, the setup is complete. If not, repeat pressing the POWER button until the device turns off.
5. Once the device turns off, press the SETUP button to save the setting. The LED will blink twice.

3. Learning Function

The learning function allows you to copy functions from your original remote control to the One For All remote.

1. Place the One For All remote and your original remote on a flat surface, facing each other, about 1-2 inches apart.
2. On the One For All remote, press and hold the SETUP button until the LED blinks twice and stays lit.
3. Press the key on the One For All remote that you wish to learn a function onto (e.g., a specific input button). The LED will blink rapidly.
4. On your original remote, press the key you want to copy (e.g., the corresponding input button). The LED on the One For All remote will blink twice to confirm successful learning.
5. Repeat for any other keys you wish to learn.
6. To exit learning mode, press the SETUP button.

Operating Instructions

Basic Functions

• Power (Red Button): Turns your TV or connected device on/off.
• TV/STB Buttons: Selects which device the remote is currently controlling (TV or Set-Top Box).
• Volume Up/Down (VOL +/-): Adjusts the volume of your TV.
• Channel Up/Down (CH +/-): Changes the channel on your TV or Set-Top Box.
• Mute (Speaker with X): Mutes or unmutes the sound.
• Number Buttons (0-9): Directly enter channel numbers.
• OK Button: Confirms selections in menus.
• Navigation Arrows: Navigate through menus and options.
• Home: Accesses the smart TV home screen or main menu.
• Guide: Opens the electronic program guide.
• Apps: Accesses smart TV applications.
• Back: Returns to the previous screen or menu.
• Menu: Opens the device's main menu.
• Exit: Exits the current menu or application.
• CH Return (Curved Arrow): Returns to the previously viewed channel.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the remote control. Do not use abrasive cleaners or solvents.
• Battery Replacement: Replace batteries when the remote's LED indicator blinks slowly or the remote becomes unresponsive. Always replace all batteries at the same time with new ones of the same type.
• Storage: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.
• Avoid Drops: Protect the remote from physical shocks and drops, as this can damage internal components.

Troubleshooting

Remote is not working after setup.

• Ensure batteries are inserted correctly and are not depleted.
• Re-attempt the setup process, ensuring the remote is pointed directly at the device.
• Verify that the correct device mode (TV or STB) is selected.

Some buttons do not work or perform the wrong function.

• If you used the learning function, try re-learning the specific button.
• Ensure the original remote was working correctly when learning.
• For standard functions, try resetting the remote to factory defaults (refer to One For All support website for specific instructions for URC6821).

LED on remote blinks continuously.

• This usually indicates low battery power. Replace the batteries.

Specifications

Warranty and Support

For warranty information and technical support, please visit the official One For All website or contact their customer service.

One For All Official Website: www.oneforall.com

Please have your model number (URC6821) and purchase details ready when contacting support.