OMNIHIL OMNI0329024060

OMNIHIL 2-Port Wall Charger Instruction Manual

Model: OMNI0329024060

1. Product Overview

The OMNIHIL 2-Port Wall Charger is a versatile power adapter designed to provide efficient charging for various electronic devices. This charger features two USB output ports, allowing for simultaneous charging of two devices. It is UL Listed, ensuring compliance with safety standards for electrical products.

Key features include:

  • World Wide 100V ~ 240V 50/60Hz input compatibility.
  • UL Listed certification for safety.
  • OVP (Over Voltage output Protection), OCP (Over Current output Protection), and SCP (Short Circuit output Protection) for device safety.
  • Designed to meet or exceed standard specifications.
OMNIHIL 2-Port Wall Charger

Figure 1: Front view of the OMNIHIL 2-Port Wall Charger, showing its compact design.

2. Setup

Setting up your OMNIHIL 2-Port Wall Charger is a simple process. Follow these steps to begin charging your devices:

  1. Unpack the Charger: Carefully remove the wall charger from its packaging.
  2. Locate a Power Outlet: Identify a standard wall power outlet (100V ~ 240V AC) that is easily accessible and free from obstructions.
  3. Plug in the Charger: Insert the charger's prongs into the power outlet. Ensure it is firmly seated.
OMNIHIL 2-Port Wall Charger prongs

Figure 2: The OMNIHIL 2-Port Wall Charger showing its electrical prongs ready for insertion into a power outlet.

3. Operating Instructions

Once the charger is plugged into a power outlet, you can begin charging your compatible electronic devices.

  1. Connect USB Cable: Obtain a USB charging cable compatible with your device.
  2. Insert Cable into Charger: Plug one end of the USB cable into one of the two available USB ports on the OMNIHIL wall charger.
  3. Connect to Device: Plug the other end of the USB cable into your electronic device (e.g., smartphone, tablet, wireless speaker).
  4. Verify Charging: Confirm that your device indicates it is charging. You can charge two devices simultaneously using both USB ports.
OMNIHIL 2-Port Wall Charger with two USB ports

Figure 3: The OMNIHIL 2-Port Wall Charger displaying its two USB output ports, allowing for dual device charging.

4. Maintenance

Proper care and maintenance will extend the lifespan of your OMNIHIL 2-Port Wall Charger.

  • Cleaning: Disconnect the charger from the power outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or abrasive materials.
  • Storage: When not in use, store the charger in a cool, dry place away from direct sunlight and extreme temperatures.
  • Handling: Avoid dropping the charger or subjecting it to strong impacts. Do not attempt to disassemble the unit.
  • Cable Management: Ensure charging cables are not excessively bent or tangled, as this can damage the cables and potentially the charger ports.

5. Troubleshooting

If you encounter issues with your OMNIHIL 2-Port Wall Charger, refer to the following common troubleshooting steps:

  • Device Not Charging:
    • Ensure the charger is securely plugged into a live power outlet.
    • Try a different power outlet.
    • Verify that the USB cable is properly connected to both the charger and your device.
    • Test with a different USB cable to rule out a faulty cable.
    • Try charging a different device to confirm the charger's functionality.
  • Slow Charging:
    • Ensure your device and cable are compatible with the charger's output (DC 5V, 2.1A).
    • Avoid using excessively long or low-quality USB cables, which can reduce charging efficiency.
    • If charging two devices simultaneously, the available current is shared, which might result in slower charging for each device compared to charging a single device.
  • Charger is Hot:
    • It is normal for chargers to become warm during operation. However, if the charger becomes excessively hot to the touch or emits a burning smell, immediately unplug it from the power outlet and discontinue use.

6. Specifications

The following table details the technical specifications of the OMNIHIL 2-Port Wall Charger:

Attribute Value
Model Number OMNI0329024060
Input Voltage 100V ~ 240V AC, 50/60Hz, 0.4A
Output Voltage/Current DC 5V, 2.1A
Total USB Ports 2
Product Dimensions 96 x 2 x 3 inches (approximate, based on product data)
Item Weight 5 ounces
Color White
Safety Certification UL Listed
Manufacturer Zhongshan Master Light Source Electronic

Note: Product dimensions are approximate and may refer to packaging or cable length in some contexts. The charger itself is compact.

7. Warranty Information

OMNIHIL provides a 5 Year Free Warranty for this product. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

For warranty service or inquiries, please contact OMNIHIL customer support.

8. Customer Support

For any questions, technical assistance, or support regarding your OMNIHIL 2-Port Wall Charger, please visit the official OMNIHIL store on Amazon or contact their customer service directly.

OMNIHIL Store: https://www.amazon.com/stores/OMNIHIL/page/6F2AFDFF-1060-4B90-9571-C13D4D78EB19

Documents - OMNIHIL – OMNI0329024060

no relevant documents