1. Introduction
The ALGAM LIGHTING FX-4 is a versatile 4-in-1 LED animation projector designed for various lighting applications. It combines a Gobo LED wheel, Magic Ball effect, Stroboscope, and a Class 3B Laser to create dynamic visual displays. This manual provides essential information for safe operation, setup, and maintenance of your FX-4 unit.
2. Safety Information
WARNING: This product contains a Class 3B Laser. Direct exposure to the laser beam can cause eye injury. Never look directly into the laser aperture. Always ensure the laser is directed away from people and reflective surfaces.
- Read this entire manual before operating the device.
- Keep this manual for future reference.
- This device is for indoor use only. Do not expose to rain or moisture.
- Ensure the power supply voltage matches the unit's requirements (100-240V 50/60 Hz).
- Always connect the safety cord when suspending the unit.
- Do not open the housing. There are no user-serviceable parts inside. Refer all servicing to qualified personnel.
- Avoid direct eye exposure to the laser output. Maintain a safe distance from the laser aperture.
- For detailed safety guidelines, please refer to the official user manual available at: https://tinyurl.com/al-notice-lal-fx4
3. Package Contents
Carefully unpack your ALGAM LIGHTING FX-4 and check that all items are present and in good condition:
- ALGAM LIGHTING FX-4 Projector
- Power Cable
- IR Remote Control
- Hanging Bracket
- Safety Cord
- Velcro Strap
- User Manual (this document)
Image 3.1: ALGAM LIGHTING FX-4 projector and included accessories.
4. Setup
- Mounting: The FX-4 can be mounted on a ceiling or wall using the integrated hanging bracket. Ensure the mounting surface is capable of supporting the unit's weight (1.4 kg). Secure the bracket firmly.
- Safety Cord: Always attach the provided safety cord to a secure anchor point when suspending the unit. This prevents the unit from falling if the primary mounting fails.
- Power Connection: Connect the power cable to the 'POWER IN' socket on the rear panel of the unit and then to a suitable power outlet (100-240V 50/60 Hz).
- DMX Connection (Optional): If using DMX control, connect a DMX controller to the 'DMX IN' port using a 3-pin XLR cable. For daisy-chaining multiple units, connect the 'DMX OUT' of the first unit to the 'DMX IN' of the next.
Image 4.1: Rear panel connections and controls of the FX-4.
5. Operating Instructions
5.1 Powering On/Off
Once connected to power, the unit will automatically power on. To power off, disconnect the power cable from the mains outlet.
5.2 Control Panel
The rear panel features an LED display and control buttons (MENU, ENTER, UP, DOWN) for direct operation.
- MENU: Cycles through the main menu options.
- ENTER: Confirms the selected option or value.
- UP/DOWN: Navigates through menu options or adjusts values.
5.3 IR Remote Control
The included IR remote control provides convenient wireless operation. Point the remote towards the front of the unit for best reception. Functions typically include mode selection, effect activation, and speed/sensitivity adjustments.
5.4 Effects Overview
The FX-4 combines four distinct lighting effects:
- Gobo LED Wheel: Projects various patterns using RGB LEDs (6x3W).
- Magic Ball: Creates a multi-colored, rotating sphere effect (3x3W).
- Stroboscope: Produces rapid flashes of light.
- Laser: Projects red and green laser patterns (Class 3B).
Image 5.1: Example of light effects produced by the FX-4.
6. DMX Control
The FX-4 can be controlled via DMX512 protocol, offering precise control over its various functions. It utilizes 14 DMX channels.
- Connect your DMX controller to the 'DMX IN' port.
- Set the DMX address of the FX-4 using the control panel. Refer to the full user manual for a detailed DMX channel chart.
- Use a 3-pin XLR cable for DMX connections.
7. Maintenance
7.1 Cleaning
To maintain optimal performance and extend the lifespan of your unit, regularly clean the lenses and housing. Use a soft, lint-free cloth. For stubborn dirt, a mild glass cleaner can be applied to the cloth (not directly to the unit).
7.2 Fuse Replacement
The unit is equipped with a 5A fuse. If the unit does not power on, check the fuse located near the power input. To replace, disconnect power, unscrew the fuse holder, replace with a fuse of the same type and rating (5A), and reassemble.
8. Troubleshooting
- No Power: Check the power cable connection, the power outlet, and the unit's fuse (5A).
- No Light Output: Ensure the unit is powered on and not in a 'blackout' mode. Check DMX settings if applicable.
- Laser Not Working: Verify that the laser key is inserted and turned to the 'ON' position (if applicable, check the rear panel image for a key lock). Ensure no safety interlocks are engaged.
- Remote Control Not Responding: Check the battery in the remote. Ensure there are no obstructions between the remote and the unit's IR receiver.
9. Specifications
- Model: FX-4 (LAL FX-4)
- Effects: Gobo LED (RGB 6x3W), Magic Ball (3x3W), Stroboscope, Laser (Red/Green Class 3B)
- DMX Channels: 14
- DMX Connection: XLR 3-pin In/Out
- Power Supply: 100-240V, 50/60 Hz
- Fuse: 5A
- Dimensions (L x W x H): 17.5 x 12 x 14 cm
- Weight: 1.4 kg
- Material: Plastic, Metal
- Mounting: Ceiling or Wall
- Color: Black
10. Warranty and Support
For warranty information and technical support, please contact your retailer or the ALGAM LIGHTING customer service department. Keep your proof of purchase for any warranty claims.
