saschedross ES-DC003

Download PDF
Contents

saschedross AC Adapter Instruction Manual

Model: ES-DC003

Introduction

This manual provides essential instructions for the safe and efficient use of your saschedross AC Adapter, designed as a replacement power supply for the EUASOO ES-DC003 ESDC003 Docking Station. Please read this manual thoroughly before use and retain it for future reference.

Safety Information

  • Ensure the power outlet voltage matches the adapter's input voltage (110V AC).
  • Do not expose the adapter to water, moisture, or extreme temperatures.
  • Avoid dropping or subjecting the adapter to severe impact.
  • Do not attempt to disassemble or modify the adapter. This may cause electric shock or fire.
  • Keep the adapter away from children and pets.
  • Unplug the adapter from the power outlet when not in use for extended periods.
  • If the adapter or power cord is damaged, discontinue use immediately and seek a replacement.

Package Contents

Verify that all items are present in the package:

  • 1 x saschedross AC Adapter (Model: ES-DC003 compatible)
  • 1 x Detachable AC Power Cord

Product Overview

The saschedross AC Adapter is designed to provide stable power to your EUASOO ES-DC003 ESDC003 Docking Station. It features a robust design and standard connectors for reliable operation.

saschedross AC Adapter with dimensions

Figure 1: saschedross AC Adapter showing main unit and cable dimensions. The adapter measures approximately 4.2 inches in length, 1.8 inches in width, and 1.2 inches in height. The total cable length is approximately 10.6 feet, with 3.7 feet from the adapter to the DC connector and 6.6 feet from the adapter to the AC plug.

Detachable AC Power Cord

Figure 2: Detachable AC Power Cord. This cord connects the AC adapter to the wall outlet, featuring a standard 2-pin plug for the wall and a C7 connector for the adapter.

Setup

  1. Connect the AC Power Cord: Insert the C7 connector end of the detachable AC power cord into the AC input port on the saschedross AC Adapter. Ensure it is firmly seated.
  2. Connect to Power Outlet: Plug the 2-pin end of the AC power cord into a standard 110V AC wall outlet.
  3. Connect to Docking Station: Connect the DC output connector of the saschedross AC Adapter to the power input port of your EUASOO ES-DC003 ESDC003 Docking Station.
  4. Verify Power: A green indicator light on the AC adapter should illuminate, indicating that power is being supplied.
AC Adapter connected and in use

Figure 3: AC Adapter connected to a wall outlet, demonstrating typical usage. The green LED indicates active power.

Operating Instructions

Once properly connected, the saschedross AC Adapter will automatically provide the necessary 20VDC power to your EUASOO ES-DC003 ESDC003 Docking Station. No further user interaction is required for basic operation.

  • Ensure the docking station is compatible with a 20VDC power input.
  • The adapter is designed for continuous operation. However, for energy saving or safety, unplug it when not in use for extended periods.

Maintenance

  • Cleaning: Disconnect the adapter from all power sources before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or aerosols.
  • Storage: Store the adapter in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly winding the cables to prevent damage.
  • Inspection: Periodically inspect the adapter and power cord for any signs of damage, such as frayed wires, cracks, or bent pins. If damage is found, replace the unit.

Troubleshooting

If you encounter issues with your AC adapter, refer to the following common problems and solutions:

ProblemPossible CauseSolution
No power indicator light / Docking station not receiving power.
  • Power cord not fully connected.
  • Wall outlet is not active.
  • Adapter or power cord is damaged.
  • Incorrect adapter for the docking station.
  • Ensure all connections are secure.
  • Test the wall outlet with another device.
  • Inspect the adapter and cord for damage. Replace if necessary.
  • Verify the adapter's specifications match the docking station's requirements.
Adapter gets excessively hot.
  • Poor ventilation.
  • Overload or internal fault.
  • Ensure the adapter is in a well-ventilated area.
  • Disconnect immediately. If overheating persists, discontinue use and replace.

Specifications

  • Brand: saschedross
  • Model Compatibility: EUASOO ES-DC003 ESDC003 Docking Station
  • Input Voltage: 110 Volts AC
  • Output Voltage: 20V DC
  • Connector Type: 2-Pin (AC input), Male-to-Female (DC output)
  • Color: Black
  • Manufacturer: Shenzhen Waweis Technology Co., Ltd

Warranty and Support

For warranty information or technical support, please refer to the retailer's return policy or contact the seller directly. Keep your purchase receipt for any warranty claims.

© 2023 saschedross. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.