Scosche MXDM-2PXCES0

Scosche MXDM Magnetic Phone Holder Instruction Manual

Brand: Scosche | Model: MXDM-2PXCES0

1. Introduction

The Scosche MXDM Magnetic Phone Holder provides a secure and convenient way to mount your smartphone or tablet on your vehicle's dashboard. Featuring ultra-strong neodymium magnets and a thicker metal plate, it ensures stability even on uneven roads. The design allows for 360-degree rotation and includes a built-in cable clip for organized charging.

2. What's in the Box

  • MagicMount Dash Mounts (2 units)
  • MagicPlates (2 units)
  • Protective Film (2 units)
  • User Manual

3. Setup and Installation

Follow these steps to properly install your Scosche MXDM Magnetic Phone Holder:

  1. Prepare the Mounting Surface: Thoroughly clean the desired mounting surface on your dashboard using the included cleaning wipe. Ensure the surface is dry and free of dust or grease before proceeding.
  2. Attach the Mount: Peel off the protective backing from the adhesive on the base of the MagicMount. Firmly press the mount against the cleaned dashboard surface for 30-60 seconds. Allow 24 hours for the adhesive to achieve optimal strength.
  3. Prepare Your Device with MagicPlate:
    • For devices with a case: Apply the protective film to the back of your phone or inside the case, then firmly attach the MagicPlate to the film.
    • For devices without a case: Apply the protective film directly to the back of your device, then firmly attach the MagicPlate to the film.

    Note: All devices must use the included metal plate. This product is NOT compatible with MagSafe without the MagicPlate.

Image showing the Scosche MagicMount base with adhesive backing, ready for dashboard installation.

Image: The MagicMount base with its heat-resistant automotive-grade adhesive, ready for secure placement on the dashboard.

Image illustrating the placement of the MagicPlate on the back of a smartphone, either directly or on a case, for magnetic attachment.

Image: Proper placement of the MagicPlate on a smartphone for optimal magnetic connection with the mount. A protective film is recommended underneath.

Video: Official Scosche video demonstrating the installation process and key features of the MagicMount Magnetic Phone Holder for car dashboards.

4. Operating Instructions

Once installed, operating your magnetic phone holder is straightforward:

  1. Attach Your Device: Simply bring your device (with the MagicPlate attached) close to the magnetic head of the mount. The strong magnets will securely hold your phone in place.
  2. Adjust Viewing Angle: The mount features a 360-degree rotatable magnetic head with a secure lock-nut. Loosen the lock-nut slightly to adjust your device to the desired portrait or landscape orientation and viewing angle, then tighten the lock-nut to secure its position.
  3. Cable Management: Utilize the built-in cable clip on the dashboard phone holder to keep your charging cables organized and prevent clutter.
Image showing a smartphone mounted on the Scosche MagicMount, illustrating its 360-degree rotation capability for optimal viewing angles.

Image: The 360-degree adjustable head allows for easy switching between portrait and landscape modes, secured by a lock-nut.

Image detailing the integrated cable clip on the Scosche MagicMount for neat cord management while charging a device.

Image: A close-up of the built-in cable clip, designed to keep charging cords tidy and out of the way.

5. Maintenance

To ensure the longevity and optimal performance of your Scosche MXDM Magnetic Phone Holder:

  • Regularly clean the magnetic surface of the mount and the MagicPlate on your device with a soft, dry cloth to remove any dust or debris.
  • Avoid using harsh chemicals or abrasive cleaners, as these can damage the product's finish or adhesive.
  • Periodically check the adhesive bond of the mount to the dashboard. If it shows signs of weakening, consider re-applying with a new adhesive pad (if available from the manufacturer) or relocating the mount to a new, clean surface.

6. Troubleshooting

If you encounter issues with your magnetic phone holder, consider the following:

  • Phone not holding securely: Ensure the MagicPlate is correctly positioned on your device or case and is not obstructed. Verify that the mounting surface was thoroughly cleaned and allowed to cure for 24 hours after initial installation. For heavier devices, ensure the thicker MagicPlate is used.
  • Mount detaching from dashboard: The adhesive may not have fully cured, or the surface was not clean enough. Re-clean the surface and re-apply the mount, ensuring firm pressure for 30-60 seconds and a 24-hour curing period before use. Extreme temperatures can also affect adhesive performance.
  • Difficulty adjusting viewing angle: Ensure the lock-nut on the rotatable head is sufficiently loosened before attempting to adjust the angle. Tighten it firmly once the desired position is achieved.

7. Specifications

FeatureDetail
BrandScosche
Model NameScosche Dash MagicMount
Model NumberMXDM-2PXCES0
Mounting TypeDashboard
Compatible DevicesSmartphones (Apple iPhone 17 / iPhone Air / iPhone 17 Pro / iPhone 17 Pro Max / iPhone 16 / iPhone 16 Plus / iPhone 16 Pro / iPhone 16 Pro Max / iPhone 16e, 15 / 15 Plus / 15 Pro / 15 Pro Max, 14 / 14 Plus / 14 Pro / 14 Pro Max / SE 3 / 13 / 13 Pro / 13 Pro Max / 13 Mini / 12 / 12 Pro / 12 Pro Max / 11 / 11 Pro / 11 Pro Max / X / XR / Xs / Xs Max / 8 / 8 Plus / 7 / 7 / 6 / 6S / Plus, AirPods, AirPods Pro, Samsung Galaxy S25 Ultra / S25 Edge / S25+ / S25 / S24 Ultra / S24+ / S24 / S24 FE / S23 Ultra / S23+ / S23 / S23 FE / S22 Ultra / S22+ / S22 / S21 / S21+ / S21 Ultra 5G / S20 / S20+ / XCover6 Pro / Note 20 / Note10 / Note10+ / S10 / S10+ / S10e / S9 / S8, / Z Fold6 / Z Flip6 / Z Fold5, Z Flip5, Tab S9 Ultra, S22 Ultra 5G / S22 Plus / S21 Ultra 5G / S21+ 5G / S21 5G / Note20 Ultra 5G / Note20 Ultra / Note20 5G / 20+ 5G / S20 Ultra / S20 5G / S20 Ultra 5G / S10 / S10+ / S10E / S9 / S9+ / S8 / S8+ / Note 8 / S7 / S7 Edg e/ S6 / S6 Edge / S5 / S4 / A72 / A70s / A52 5 / A35 / A25 / A15 / A20s / M30s / M10s / A90 5G / A30s / A50s / LG K92 5G / K62 / Q52 / K52 / K42 / K71 / Stylo 6 / V50S ThinQ 5G / G8X ThinQ / Q70 / K30(2019) / K20(2019) / K40S / K50S/ W30 Pro/ W30 / W10 / Stylo 5 / V50 ThinQ 5G / G8S ThinQ / G8 ThinQ / Q60 / K50 / K40 / Q9 / V40 ThinQPixel 5 / 4a 5G / 4a / 4 XL / 4 / 3a XL / 3a / 3 XL / 3 / 2 / 2 XL / XL / Pixel 10 / Pixel 10 Pro / Pixel Pro 10 XL / Pixel 9 / 9 Pro / 9 Pro XL / 9 Pro Fold / 8/8 Pro/8a/7a/Pixel Fold/7 Pro/7 P/6 Pro/6/6a/5/5a/4a/4 xl/3a xl/3a/3 xl/2 XL, LG Stylo 6/5/4/3/2, LG G8/G7/G6/G5/G4/G3, Nexus, OnePlus 12 / 11 5G / 12R / Open / Nord N30 5G / 3 / 2 / X; Kindle Fire New HD 10 9 8, Sony, Nokia, XiaoMi, Huawei, Motorola, Nintendo Switch, and other Devices
Additional FeaturesAdjustable, Hand Free, Magnetic, Rotatable
Item Dimensions1.7 x 2 x 1.8 inches
Item Weight0.15 Kilograms
Enclosure MaterialAcrylonitrile Butadiene Styrene, Plastic
UPC033991104747

8. Warranty and Support

The Scosche MXDM Magnetic Phone Holder is backed by Scosche's Lifetime Tech Support and a 3-Year Limited Warranty. For any technical assistance or warranty claims, please contact Scosche customer service.

Return Policy: This product is eligible for a refund/replacement within 30 days, as per Amazon's return policy.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.