Homedics Drift Sandscape Solid Wood Stand

Introduction

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Homedics Drift Sandscape Solid Wood Stand. This stand is designed to elevate your compatible Homedics Drift Sand Table, enhancing its aesthetic appeal and viewing experience.

The stand is crafted from solid wood, offering a stable and elegant base for your Drift Sand Table. It is compatible with Homedics Drift Meditation Sand Tables models ST-300-BK and ST-300-CE.

Image: The Homedics Drift Sandscape Solid Wood Stand, shown with a compatible sand table (sold separately) placed on its top surface.

Safety Information

• Ensure the stand is placed on a stable, level surface to prevent tipping.
• Keep out of reach of small children and pets to avoid accidental damage or injury.
• Do not overload the stand beyond its intended capacity.
• Avoid exposing the wood to excessive moisture or direct sunlight to prevent warping or discoloration.

Package Contents

Verify that all components are present before beginning assembly:

• (1) Homedics Solid Wood Stand (disassembled)
• (1) Assembly Hardware Kit (screws, allen wrench if applicable)
• (1) Instruction Manual

Note: The Homedics Drift Sand Table is sold separately and is not included with this stand.

Setup Instructions

Assembly of the Homedics Solid Wood Stand is straightforward and requires minimal tools. A Phillips head screwdriver may be needed in addition to any included tools.

1. Unpack Components: Carefully remove all parts from the packaging. Inspect for any damage.
2. Assemble Legs: Attach the stand legs according to the diagrams provided in the separate assembly guide (if included). Ensure all screws are tightened securely.
3. Place Stand: Position the assembled stand on your desired flat, stable surface.
4. Position Drift Sand Table: Gently place your compatible Homedics Drift Sand Table (16-inch models ST-300-BK or ST-300-CE) onto the top surface of the stand. Ensure it is centered and stable.

Image: Detail of the refined elevated legs with wood grain accents, highlighting the stand's construction.

Image: The stand with a sand table, illustrating its approximate dimensions of 17 inches in diameter and 21 inches in height.

Operating Instructions

This stand serves as a base for your Homedics Drift Sand Table. The operation of the sand table itself is controlled via its dedicated power button and the Homedics Drift mobile application.

• Powering On/Off: Use the power button located on your Homedics Drift Sand Table to turn it on or off.
• App Control: Download the "Homedics Drift" app from your device's app store to access various patterns, adjust light colors and brightness, and control the speed of the magnetic ball.
• Enhanced Viewing: The elevated design of the stand provides an optimal viewing angle for observing the intricate patterns created by the sand table.

Maintenance

• Cleaning: Wipe the wooden surfaces of the stand with a soft, dry cloth. For stubborn marks, a slightly damp cloth can be used, followed immediately by a dry cloth. Avoid abrasive cleaners.
• Dusting: Regularly dust the stand to maintain its appearance.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.

Troubleshooting

If you encounter any issues with your Homedics Solid Wood Stand, please refer to the following common solutions:

• Stand Wobbles: Ensure the stand is on a completely flat surface. Check that all assembly screws are fully tightened.
• Damage to Wood: For minor scratches, wood repair kits or markers can be used. For significant damage, contact Homedics customer support.

Note: For issues related to the Homedics Drift Sand Table itself (e.g., patterns, lighting, app connectivity), please refer to the separate instruction manual provided with your sand table.

Specifications

Warranty and Support

This Homedics Solid Wood Stand comes with a 1-Year Limited Warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

For warranty service or technical support, please contact Homedics Customer Service:

• Website: Visit the official Homedics website for support resources and contact information.
• Phone: Refer to the contact details provided in your product packaging or on the Homedics website.