Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Scosche Magnetic Phone Holder. Designed for car dashboards, this mount offers a secure and convenient way to hold your smartphone while driving, featuring extra strong magnets and 360° rotation for optimal viewing.
What's in the Box
- MagicMount Dash Mount
- MagicPlates (metal plates for phone/case)
- Protective Film
- User Manual (this document)
Setup and Installation
Follow these steps to properly install your Scosche Magnetic Phone Holder:
Step 1: Prepare the Mounting Surface
Choose a flat, clean area on your car's dashboard. Ensure the surface is free from dust, grease, and moisture. For optimal adhesion, clean the area with an alcohol wipe and let it dry completely.
The mount features a heat-resistant automotive-grade adhesive for secure attachment to your dashboard.
Step 2: Apply the MagicPlate to your Device
The MagicPlate is a thin metal plate that attaches to your phone or phone case, allowing it to magnetically connect to the mount. For best hold, apply the included MagicPlate to your phone or case. You can place it directly on the back of your phone, inside your phone case, or on the outside of your case. If placing inside a case, ensure the case is not too thick to impede magnetic connection. Apply the protective film to your phone before attaching the MagicPlate to prevent residue.
The MagicPlate is essential for the magnetic connection. It is compatible with most modern phones, including those with wireless charging, but is NOT compatible with MagSafe-only cases or phones without the MagicPlate.
Step 3: Mount the Holder
Peel off the adhesive backing from the mount and firmly press it onto the prepared dashboard surface. Hold it in place for at least 30 seconds to ensure strong adhesion. Allow 24 hours for the adhesive to fully cure before attaching your phone.
The mount features stronger magnets and a thicker plate to provide a secure hold for larger phones.
Operating Instructions
Once installed, using your Scosche Magnetic Phone Holder is simple and intuitive.
Attaching Your Phone
Simply bring your phone (with the MagicPlate attached) close to the magnetic surface of the mount. The strong magnets will automatically secure your device in place. The cradle-free design allows for quick, one-hand attachment and removal, keeping your focus on the road.
Adjusting Viewing Angle
The mount features a 360° rotating head, allowing you to tilt or swivel your phone to achieve the perfect viewing angle. You can easily switch between portrait mode for navigation and landscape mode for media or other applications. A lock nut secures the position.
Rotate or tilt the mount head for optimal viewing, and use the lock nut to secure your preferred position.
Cable Management
A built-in cable clip on the back of the magnetic car phone holder helps keep charging cords secure and out of sight, ensuring your dashboard remains clean and organized.
Utilize the cable clip for effective cord management.
Maintenance
To ensure the longevity and optimal performance of your Scosche Magnetic Phone Holder, follow these simple maintenance guidelines:
- Cleaning: Wipe the mount and magnetic surface with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish or adhesive.
- Adhesive Check: Periodically check the adhesive base to ensure it remains firmly attached to the dashboard. If the mount becomes loose, re-clean the surface and reapply, or consider using a new adhesive pad if available.
- Magnetic Plates: Ensure the MagicPlates on your phone or case are clean and securely attached. Dust or debris on the plate can reduce magnetic strength.
Troubleshooting
If you encounter any issues with your Scosche Magnetic Phone Holder, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Phone does not hold securely. | MagicPlate not properly aligned or too far from magnets (e.g., thick case). | Ensure MagicPlate is centered on your phone/case. Try placing the MagicPlate on the outside of a thick case. Ensure the MagicPlate is clean. |
| Mount detaches from dashboard. | Dashboard surface was not clean or adhesive did not cure properly. | Re-clean the dashboard surface thoroughly with alcohol and allow to dry. Reapply the mount, pressing firmly for 30 seconds, and allow 24 hours for adhesive to cure before use. |
| Phone gets hot while mounted. | Direct sunlight exposure. | Consider repositioning the mount to an area less exposed to direct sunlight, especially during long drives or hot weather. |
Specifications
- Model Number: MXDM-XCES0
- Product Dimensions: 1.7 x 2 x 1.8 inches
- Item Weight: 2.82 ounces
- Color: Black
- Mounting Type: Dashboard (Adhesive)
- Special Features: Adjustable, Hand Free, Magnetic, Rotatable, Cable Clip
- Compatible Devices: Smartphones (requires MagicPlate)
- Manufacturer: Scosche
Warranty and Support
Your Scosche Magnetic Phone Holder is backed by Scosche's Lifetime Tech Support and a 3-Year Warranty. For technical assistance, warranty claims, or additional information, please visit the official Scosche website or contact their customer service department.
Official Scosche Website: www.scosche.com
