GUODDM YYDD108956

GUODDM 24V LED Spotlight User Manual

Model: YYDD108956

Brand: GUODDM

1. Introduction

Thank you for choosing the GUODDM 24V LED Spotlight. This high-quality outdoor projector is designed for various applications, including construction lighting, landscape illumination, and architectural accent lighting. It features a narrow beam, long projection distance, and IP67 waterproof rating, ensuring reliable performance in diverse environments. This manual provides essential information for the safe and effective installation, operation, and maintenance of your LED spotlight.

2. Safety Information

  • Electrical Safety: Ensure the power supply matches the product's voltage requirements (DC 24V). All electrical connections should be performed by a qualified electrician to prevent electric shock or fire hazards.
  • Installation: Do not install the product in unstable locations. Ensure all mounting hardware is securely fastened.
  • Waterproofing: While the product is IP67 waterproof, ensure all connections are properly sealed to maintain water resistance. Do not submerge the product beyond its rated depth.
  • Heat: The LED spotlight may become warm during operation. Avoid touching the light source directly when it is active. Ensure adequate ventilation around the fixture.
  • Eye Protection: Do not stare directly into the LED light source when it is illuminated, as this may cause eye strain or damage.

3. Package Contents

Verify that all components are present before installation:

  • LED Spotlight x 1
  • Mounting Bracket (pre-attached)

4. Specifications

ParameterValue
BrandGUODDM
Model NumberYYDD108956
Power SourceDC 24V
Wattage10W
Light Source TypeLED (Cree XPE)
Maximum Luminous Flux1000 Lumens
Beam Angle3 Degrees
Projection Distance (10W)30 meters
Waterproof RatingIP67
MaterialThickened 6063 Aluminum, Tempered Glass
Finish TypePolished
Item Dimensions (L x W x H)30 x 20 x 10 mm (approximate, based on product dimensions)
Item Weight1000 Grams
Mounting TypeAdjustable Mounting Bracket
Smart Home CompatibilityNot compatible with smart home systems
Diagram showing the dimensions of the GUODDM LED spotlight, with a length of 115mm and a base width of 54mm.

Image 1: Product dimensions of the GUODDM LED Spotlight. The spotlight measures approximately 115mm in length and has a base width of 54mm.

Close-up images detailing the features of the GUODDM LED spotlight, including tempered glass, Cree XPE LED, 360-degree adjustable bracket, and 6063 aluminum material.

Image 2: Detailed view of spotlight features. This image highlights the tempered glass surface, optical condenser lens, American CREE XPE LED light source, 360-degree angle adjustment bracket, and thickened 6063 aluminum material for efficient heat dissipation.

5. Setup

Follow these steps for proper installation of your LED spotlight:

  1. Choose a Location: Select a suitable mounting location that provides the desired lighting coverage and is structurally sound to support the fixture.
  2. Mount the Bracket: Use appropriate screws and anchors (not included) to securely fasten the adjustable mounting bracket to the chosen surface. The bracket allows for 360-degree angle adjustment.
  3. Connect Power: Connect the spotlight to a DC 24V power supply. Ensure correct polarity (positive to positive, negative to negative). It is recommended to use a professional transformer for optimal performance and safety. Ensure all electrical connections are waterproofed, especially for outdoor installations.
  4. Adjust Angle: Loosen the screws on the side of the bracket to adjust the spotlight's beam direction. Tighten the screws once the desired angle is achieved.
A close-up view of the GUODDM LED spotlight, showing its robust black aluminum casing and clear lens, mounted on an adjustable bracket.

Image 3: Close-up of the GUODDM LED Spotlight. This image shows the spotlight's construction and its adjustable mounting bracket, ready for installation.

6. Operating Instructions

Operating the GUODDM 24V LED Spotlight is straightforward:

  1. Power On: Once properly installed and connected to a DC 24V power source, simply switch on the power supply to illuminate the spotlight.
  2. Power Off: To turn off the spotlight, switch off the power supply.
  3. Beam Adjustment: If needed, adjust the beam direction by loosening the bracket screws, repositioning the light, and re-tightening the screws (refer to Section 5, Step 4).
An image demonstrating the lighting effects of the GUODDM LED spotlight in various colors: Cold White, Warm White, Red, Green, Blue, and Yellow.

Image 4: Lighting effect display. This image illustrates the different light colors available from the GUODDM LED spotlight, including Cold White, Warm White, Red, Green, Blue, and Yellow.

A collage of application scenarios for the GUODDM LED spotlight, showing it illuminating buildings, bridges, and landscapes at night.

Image 5: Application scenarios. This image displays various uses for the spotlight, such as illuminating billboards, buildings, and stages, showcasing its effectiveness in outdoor settings.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your LED spotlight:

  • Cleaning: Periodically clean the lens and housing with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the finish or lens.
  • Inspection: Regularly inspect the power cable for any signs of damage, fraying, or wear. Check the mounting bracket for stability and tightness.
  • Waterproof Seals: For outdoor installations, ensure that all waterproof seals and connections remain intact and free from damage to maintain the IP67 rating.

8. Troubleshooting

If you encounter issues with your GUODDM LED Spotlight, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Spotlight does not turn onNo power supply; Incorrect wiring; Faulty power adapterCheck power connection and ensure the switch is on; Verify wiring polarity; Test with a different power adapter (DC 24V)
Light is dim or flickersInsufficient power; Loose connection; Damaged cableEnsure power supply meets 24V requirement; Check all connections for tightness; Inspect cable for damage and replace if necessary
Water ingressDamaged seal; Improperly sealed connectionInspect all seals and connections. If damaged, replace or re-seal immediately to prevent further damage.

9. Warranty and Support

GUODDM is committed to providing quality products and satisfactory service. While specific warranty details are not provided in this manual, if you have any questions or require assistance with your product, please contact our customer service. We aim to respond to inquiries within 10 hours.

For professional transformers compatible with this spotlight, please search for ASIN: B0B9H6P3LQ or B0B9H3VRF2.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.