Tribesigns HOGA-RY0055 63-Inch Console Table Instruction Manual

Introduction

Thank you for choosing the Tribesigns HOGA-RY0055 63-Inch Console Table. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.

Image: The Tribesigns 63-Inch Console Table, showcasing its rustic dark grey finish and overall design.

Safety Information

• Always assemble the product on a soft, clean surface to prevent scratches.
• Ensure all parts are present and undamaged before assembly. Contact customer support if any parts are missing or defective.
• Do not overtighten screws during assembly, as this may damage the material.
• Keep small parts away from children during assembly.
• This console table is designed to support a maximum weight of 200 pounds. Do not exceed this limit.
• For optimal stability, especially in households with children or pets, consider securing the table to a wall using appropriate anti-tip hardware (not included unless specified).

Setup and Assembly

Assembly of the Tribesigns HOGA-RY0055 console table typically requires two people and takes approximately 30-40 minutes. An assembly guide and installation tool are included with your purchase.

Required Tools (Included)

• Installation Tool (e.g., Allen wrench)

Assembly Steps

1. Unpack Components: Carefully remove all parts from the packaging. Verify that all components listed in the assembly guide are present.
2. Identify Parts: Refer to the included assembly guide to identify each part (e.g., top panel, side panels, shelves, hardware).
3. Attach Side Panels: Secure the side panels to the main console top using the provided hardware. Ensure all connections are firm but do not overtighten.
4. Install Shelves: Insert the side storage shelves into their designated slots on the side panels.
5. Connect Arch Support: Attach the central arch support structure to the underside of the console top and to the inner side panels, if applicable, as per the assembly guide.
6. Final Tightening: Once all parts are loosely assembled, gradually tighten all screws and fasteners to ensure a stable structure.
7. Attach Anti-Slip Pads: Apply the included anti-slip pads to the bottom of the table legs to protect your flooring and enhance stability.

Image: Detailed dimensions of the console table, including length (63 inches), depth (11.75 inches), and height (33.5 inches).

Image: Visual representation of the table's thick board construction, arch structure for stability, and anti-slip pads for floor protection.

Operation and Usage

The Tribesigns HOGA-RY0055 console table is designed for residential indoor use. It serves as a versatile surface for displaying decorative items, storing books, or organizing essentials in entryways, living rooms, or hallways.

Key Features:

• Ample Surface Area: The 63-inch long tabletop provides generous space for lamps, photo frames, and other decor.
• Side Storage Shelves: Integrated open shelves on each side offer convenient storage for smaller items, books, or decorative accents.
• Sturdy Construction: Crafted from engineered wood with a thick table board and arch structure for durability and load-bearing capacity.

Image: A detailed view of the console table's practical side storage shelves, highlighting their design and utility.

Image: A close-up showing the rustic dark grey wood grain finish of the console table, emphasizing its aesthetic quality.

Maintenance and Care

Proper care will extend the life and preserve the appearance of your console table.

• Cleaning: Wipe the surface with a damp cloth for general cleaning. For spills, wipe immediately with a dry cloth. Avoid abrasive cleaners or harsh chemicals.
• Dusting: Regularly dust with a soft, dry cloth.
• Protection: Use coasters under drinks and placemats under hot items to prevent damage to the surface.
• Sunlight Exposure: Avoid prolonged direct sunlight exposure to prevent fading or discoloration of the wood finish.
• Humidity: Maintain a stable humidity level in the room to prevent warping or cracking of the wood.

Troubleshooting

Common Issues and Solutions:

• Table Wobbles:
  • Ensure all screws and fasteners are securely tightened.
  • Check if the floor surface is uneven. Adjust the anti-slip pads or use shims if necessary.
• Scratches or Minor Damage:
  • For minor scratches, a wood repair marker or furniture polish matching the finish color may be used.
  • Avoid dragging objects across the table surface.
• Difficulty During Assembly:
  • Re-read the assembly guide carefully, paying attention to diagrams.
  • Ensure you are using the correct hardware for each step.
  • Do not force parts together. If a part does not fit, recheck the orientation or contact customer support.

Specifications

Warranty Information

The Tribesigns HOGA-RY0055 Console Table comes with a Lifetime Warranty. This warranty covers manufacturing defects and ensures the product's quality under normal residential use. Please retain your proof of purchase for warranty claims. For specific terms and conditions, please refer to the warranty documentation included with your product or contact Tribesigns customer support.

Customer Support

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Tribesigns customer support. You can typically find contact information on the packaging, the included assembly guide, or by visiting the official Tribesigns website.

• Online Support: Visit the Tribesigns Store on Amazon for FAQs and contact options.
• Email/Phone: Refer to your product packaging or the Tribesigns official website for direct contact details.