1. Introduction
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Faber Hood Iris BLDC Autoclean Chimney. Please read this manual thoroughly before using the appliance and retain it for future reference.
2. Safety Information
General Safety:
- Ensure the electrical supply matches the rating plate specifications.
- Installation must be performed by a qualified technician.
- Do not allow children to operate the appliance.
- Clean the chimney regularly to prevent fire hazards from grease accumulation.
- Do not flambé under the range hood.
- Ensure adequate ventilation in the room when the range hood is used simultaneously with gas or other fuel-burning appliances.
Electrical Safety:
- Always disconnect the power supply before cleaning or maintenance.
- Do not use if the power cord is damaged. Contact service for replacement.
3. Package Contents
Verify that all components are present in the packaging:
- 1 x Faber Hood Iris BLDC Autoclean Chimney Unit
- 1 x User Manual
- 1 x Warranty Card
- Installation accessories (screws, wall plugs, ducting adapter - may vary by region)
4. Product Features
The Faber Hood Iris BLDC Autoclean Chimney is designed for efficient kitchen ventilation with advanced features:
Image: Front view of the Faber Hood Iris BLDC Autoclean Chimney.
- Type: Curved Glass, Wall Mounted
- Size: 60 cm (suitable for 2-4 burner stoves)
- Suction Power: 1500 m³/hr for effective smoke and odor removal
- Filter Type: Filterless design for reduced maintenance
- Control Type: Touch Control, Gesture Control, and Motion Sensor for intuitive operation
- Speed Settings: 9 adjustable speeds
- Noise Level: 52dB for quiet operation
- Special Features: Autoclean function, Built-In Oil Collector, 2 LED Lamps for illumination
- Motor: BLDC Motor with Direct Drive Technology for efficiency and durability
Image: The Faber Hood Iris Chimney highlighting its 1500 m³/hr suction power and 9-speed touch switch with motion sensor.
Image: Illustration of the filterless design, auto-clean feature, and stainless steel oil collector of the Hood Iris chimney.
Image: Demonstrating the touch and gesture control interface for operating the chimney.
5. Setup and Installation
Installation should only be performed by a qualified service technician. Incorrect installation can lead to electric shock, fire, or other hazards. Refer to the detailed installation guide provided by the service technician.
Key Installation Considerations:
- Mounting: The chimney is designed for wall-mounted installation above your cooking hob.
- Ducting: Suitable for ducted installation. For ductless use, a charcoal filter is required (sold separately). Contact customer support for more information on ductless conversion.
- Clearance: Maintain appropriate clearance between the cooking surface and the bottom of the chimney as per local safety regulations and manufacturer recommendations.
- Power Supply: Connect to a dedicated 240V, 50Hz power supply.
Image: Diagram showing the dimensions of the Faber Hood Iris Chimney: 595 mm width, 420 mm depth, and 478 mm height.
6. Operating Instructions
Your Faber Hood Iris Chimney features Touch Control, Gesture Control, and a Motion Sensor for ease of use.
6.1. Power On/Off:
- Touch Control: Press the power button on the control panel.
- Gesture Control: Wave your hand from left to right in front of the motion sensor to turn the chimney on.
6.2. Adjusting Suction Speed:
- Touch Control: Use the '+' and '-' buttons on the control panel to cycle through the 9 speed settings.
- Gesture Control: Wave your hand from right to left to decrease speed, and left to right to increase speed (after initial power on).
6.3. LED Lighting:
- Press the light button on the control panel to turn the LED lamps on or off.
6.4. Autoclean Function:
- Press the dedicated Autoclean button on the control panel to initiate the cleaning cycle. The chimney will heat and melt accumulated oil, directing it to the oil collector.
Image: Close-up of the control panel, showing icons for power, speed adjustment, light, and autoclean functions, along with gesture control indicators.
7. Maintenance
Regular maintenance ensures optimal performance and longevity of your chimney.
7.1. Cleaning the Oil Collector:
- The built-in oil collector should be emptied and cleaned regularly, depending on cooking frequency.
- To remove, gently slide out the oil collector tray located at the bottom of the chimney.
- Wash with warm soapy water, rinse, and dry thoroughly before reinserting.
7.2. Exterior Cleaning:
- Wipe the exterior surfaces with a soft cloth dampened with mild detergent.
- Do not use abrasive cleaners, steel wool, or harsh chemicals, as these can damage the finish.
7.3. Autoclean Function Usage:
- Utilize the Autoclean function periodically to melt and collect internal oil deposits. This reduces manual cleaning effort for internal components.
Image: View of the chimney's underside, illustrating the filterless design and the removable oil collector tray.
8. Troubleshooting
Before contacting customer service, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Chimney not turning on | No power supply; loose connection; faulty switch. | Check power plug and circuit breaker. Ensure connections are secure. If problem persists, contact service. |
| Low suction power | Oil collector full; ducting obstruction; incorrect speed setting. | Empty and clean oil collector. Check ducting for blockages. Increase speed setting. |
| Unusual noise during operation | Loose components; motor issue; foreign object in fan. | Turn off and inspect for loose parts. Do not attempt to repair motor. Contact service. |
| Autoclean not functioning | Electrical issue; sensor malfunction. | Ensure power is stable. If the function does not activate, contact service. |
For issues not listed above or if solutions do not resolve the problem, please contact Faber customer support.
9. Specifications
| Brand | Faber |
| Model Number | 325.0718.158 (HOOD IRIS BLDC FL HC BK 60) |
| Product Dimensions (L x W x H) | 60 x 42 x 47.8 Centimeters |
| Colour | Black Matt |
| Air Flow Capacity | 1500 m³/hr |
| Noise Level | 52 Decibels |
| Control Type | Touch, Gesture, Motion Sensor |
| Number of Speeds | 9 |
| Filter Type | Filterless |
| Special Features | Autoclean, Built-In Oil Collector, LED Lighting, Noise Reduction |
| Voltage | 240 Volts |
| Frequency | 50 Hz |
| Wattage | 80 Watts |
| Material Type | Glass, Metal |
| Item Weight | 10.5 Kilograms |
10. Warranty and Support
Warranty Information:
- Comprehensive Warranty: 2 Years on the entire product by Faber.
- Motor Warranty: 8 Years on the BLDC motor by Faber.
- Please retain your purchase receipt and warranty card for any warranty claims.
Customer Support:
For installation, service, or warranty inquiries, please contact Faber customer support:
- Toll-Free Number: 1800-209-3484
- Manufacturer Address: 1086/1/2, SANASWADI, TAL - SHIRUR, PUNE - 412208, MAHARASHTRA, INDIA
You can also visit the official Faber website for more information and support resources.