1. Introduction
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Faber 90cm 1500m³/hr BLDC Motor Autoclean Chimney. Please read these instructions carefully before using the appliance and retain them for future reference. Proper use and maintenance will ensure optimal performance and longevity of your chimney.
2. Product Overview
The Faber HOOD IRIS BLDC FL HC BK 90 is a wall-mounted kitchen chimney designed for effective smoke and odor extraction. It features a powerful BLDC motor, filterless technology, and convenient control options.
Key Features:
- BLDC Motor: Offers high efficiency, reduced noise, and extended lifespan.
- 1500 m³/hr Suction Power: Suitable for kitchens with 4-6 burner stoves.
- Filterless Technology: Eliminates the need for frequent filter cleaning.
- Autoclean Feature: Simplifies internal cleaning and maintenance.
- Built-In Oil Collector: Gathers oil residues for easy disposal.
- Touch & Gesture Control: Provides intuitive operation with 9 speed settings.
- LED Lighting: Illuminates the cooking area efficiently.
Product Views:
3. Safety Instructions
Always adhere to the following safety precautions to prevent injury or damage to the appliance.
- Ensure the electrical supply matches the voltage specified on the rating label.
- Do not operate the chimney without the oil collector properly installed.
- Keep children away from the appliance during operation and cleaning.
- Never flambé under the chimney.
- Regularly clean the oil collector to prevent fire hazards.
- Disconnect power before any cleaning or maintenance.
- Installation must be performed by a qualified technician.
4. Setup and Installation
Proper installation is crucial for the chimney's performance and safety. It is recommended that installation be carried out by a Faber authorized service technician.
4.1 Unpacking
Carefully remove the chimney from its packaging. Inspect for any damage during transit. Retain packaging materials for potential future transport or service.
4.2 Mounting
The chimney is designed for wall-mounted installation. Ensure the wall structure is strong enough to support the chimney's weight. Maintain the recommended distance between the cooking surface and the chimney for optimal suction and safety.
4.3 Electrical Connection
Connect the chimney to a grounded electrical outlet. Ensure the power supply is stable and meets the appliance's requirements (240 Volts). Do not use extension cords or adapters.
4.4 Ducting (Optional)
The chimney can be installed with or without a duct. For ducted installation, ensure the ducting is properly sealed and leads to an external vent. For ductless (recirculating) use, a charcoal filter may be required (contact customer support for details).
5. Operating Instructions
Your Faber Hood Iris chimney features intuitive touch and gesture controls for easy operation.
5.1 Control Panel
The control panel is located on the front of the chimney and includes touch-sensitive buttons for various functions.
5.2 Power On/Off
- Touch Control: Press the power button on the control panel.
- Gesture Control: Wave your hand from left to right in front of the motion sensor to turn the chimney ON. Wave from right to left to turn it OFF.
5.3 Adjusting Suction Speed
The chimney offers 9 speed settings for varying cooking needs.
- Touch Control: Use the '+' and '-' buttons on the control panel to increase or decrease the fan speed.
- Gesture Control: Wave your hand from left to right to increase speed. Wave from right to left to decrease speed.
5.4 LED Lighting
Press the light button on the control panel to turn the LED lights ON or OFF, illuminating your cooking area.
5.5 Autoclean Function
The autoclean feature helps maintain the chimney's internal cleanliness. Refer to the maintenance section for details on activating and managing this function.
6. Maintenance
Regular maintenance ensures the longevity and efficient operation of your chimney.
6.1 Autoclean Cycle
The autoclean function uses heat to melt and collect oil residues. It is recommended to run the autoclean cycle periodically, depending on your cooking frequency.
- To activate, press the 'Autoclean' button on the control panel.
- The cycle will run for a set duration, after which the chimney will automatically turn off.
- Ensure the oil collector is empty before starting an autoclean cycle.
6.2 Oil Collector Cleaning
The built-in oil collector gathers oil and grease. It should be emptied and cleaned regularly.
- Carefully remove the oil collector from its housing.
- Empty the collected oil into a suitable container.
- Wash the oil collector with warm, soapy water. Rinse thoroughly and dry completely before reinserting.
6.3 Exterior Cleaning
Clean the exterior surfaces of the chimney with a soft cloth and mild detergent. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
7. Troubleshooting
If you encounter issues with your chimney, refer to the following table for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Chimney not turning on | No power supply; loose connection | Check power cord and circuit breaker. Ensure proper connection. |
| Low suction power | Oil collector full; ducting obstruction (if ducted); incorrect speed setting | Empty and clean oil collector. Check ducting for blockages. Increase fan speed. |
| Unusual noise during operation | Loose components; foreign object in fan | Turn off and disconnect power. Inspect for loose parts or obstructions. Contact service if noise persists. |
| Autoclean not functioning | Control panel issue; internal fault | Ensure power is stable. If issue persists, contact customer support. |
If the problem persists after attempting these solutions, please contact Faber customer support.
8. Specifications
Technical details for the Faber HOOD IRIS BLDC FL HC BK 90 Chimney.
| Feature | Specification |
|---|---|
| Model Number | 325.0718.160 |
| Type | Curved Glass | Wall Mounted |
| Size | 90 cm |
| Suction Power | 1500 m³/hr (Cubic Meters Per Hour) |
| Filter Type | Filterless |
| Control Type | Touch Control, Gesture Control, Motion Sensor |
| Number of Speeds | 9 |
| Noise Level | 52 dB |
| Motor Type | BLDC Motor |
| Lighting | 2 LED Lamps |
| Voltage | 240 Volts |
| Wattage | 80 Watts |
| Dimensions (LxWxH) | 90 x 42 x 47.5 Centimetres |
| Item Weight | 12.5 Kilograms |
| Material | Glass, Metal |
9. Warranty and Support
Faber provides comprehensive warranty coverage and dedicated customer support for your product.
9.1 Warranty Information
- Product Warranty: 2 Years Comprehensive Warranty on the product.
- Motor Warranty: 8 Years Warranty on the BLDC Motor.
- Warranty is valid from the date of purchase. Please retain your purchase invoice for warranty claims.
9.2 Customer Support
For installation requests, service, or any product-related queries, please contact Faber customer support:
- Toll-Free Number: 1800-209-3484
- Please have your model number and purchase details ready when contacting support.