Intex 64131ED
Intex Dura-Beam Plus Deluxe Pillow Twin Air Mattress
Model: 64131ED | Brand: Intex
1. Overview
The Intex Dura-Beam Plus Deluxe Pillow Air Mattress offers enhanced comfort, stability, and support through its Fiber-Tech Technology. With a raised height of 16.5 inches, it provides easy accessibility, mimicking the feel of traditional mattresses. The soft, velvety sleeping surface and built-in pillow contribute to a comfortable night's sleep. A powerful internal electric pump ensures convenient inflation and deflation, and a carry bag is included for easy storage and transport.
Figure 1: Intex Dura-Beam Plus Deluxe Pillow Twin Air Mattress.
2. Safety Information
Please read and understand all safety warnings and instructions before using this product. Failure to follow these instructions may result in serious injury or property damage.
- Do not overinflate.
- Keep away from sharp objects and heat sources.
- This product is not a life-saving device. Do not use in water.
- Ensure the area around the mattress is clear of obstructions.
- Supervise children when using the air mattress.
- Do not stand or jump on the mattress.
- For detailed safety information, refer to the official Safety Information PDF.
3. Setup Instructions
3.1. Initial Inflation
- Unroll the air mattress on a clean, flat surface, ensuring no sharp objects are underneath.
- Locate the built-in electric pump.
- Plug the power cord into a standard 110-120V AC electrical outlet.
- Turn the pump dial to the 'Inflate' position. The mattress will begin to inflate.
- Inflate until the mattress is firm to the touch. Do not overinflate. Inflation time for a Twin size is approximately 2.25 minutes.
- Once inflated, turn the pump dial to the 'Off' position and unplug the power cord. Securely close the pump cover.
Figure 2: Mattress specifications including inflation time.
3.2. First Use & Material Stretch
During the first few uses, the material of the air mattress will naturally stretch. This may cause the mattress to feel softer or appear to lose air. This is normal and not an indication of a leak. Simply re-inflate the mattress to your desired firmness. The material will fully settle within 2-3 nights of use.
Figure 3: Fiber-Tech Construction for enhanced support.
Figure 4: Dura-Beam Advantage: Maintains shape, unlike traditional air mattresses.
4. Operation
4.1. Inflation and Deflation
The built-in electric pump allows for quick and easy inflation and deflation. To inflate, turn the dial to the 'Inflate' position. To deflate, turn the dial to the 'Deflate' position. The pump will actively remove air from the mattress, making it easier to fold and store.
4.2. Adjusting Firmness
You can adjust the firmness of the mattress by adding or removing small amounts of air. For a firmer feel, inflate slightly more. For a softer feel, deflate slightly. Ensure the pump is in the 'Off' position when not actively inflating or deflating.
Figure 5: Top and Bottom Edge Support for a solid foundation.
5. Care and Maintenance
5.1. Cleaning
To clean the air mattress, wipe the surface with a damp cloth and mild soap. Do not use harsh chemicals or abrasive cleaners. Ensure the mattress is completely dry before storing.
5.2. Storage
After deflating, fold the mattress neatly. Store it in the included carry bag in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid placing heavy objects on top of the stored mattress.
Figure 6: Convenient carry bag for storage and transport.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mattress loses air / feels soft | Material stretching (normal for first uses) or minor temperature changes. | Re-inflate to desired firmness. This is common during the first 2-3 nights. |
| Pump not working | Not plugged in, power outage, or pump dial not in correct position. | Ensure power cord is securely plugged in. Check household power. Turn dial to 'Inflate' or 'Deflate'. |
| Difficulty folding for storage | Not fully deflated. | Ensure pump is set to 'Deflate' and runs until all air is removed. Press out any remaining air while folding. |
7. Product Specifications
| Feature | Detail |
|---|---|
| Model Name | Air Mattress with Internal Pump |
| Model Number | 64131ED |
| Size | Twin (Approx. 39" L x 75" W) |
| Height | 16.5 Inches |
| Weight Capacity | 300 Pounds (136 kg) |
| Inflation Time | Approx. 2.25 minutes (Twin) |
| Special Features | Puncture Resistant, Built-In Pump, Built-In Pillow |
| Material | PVC (Fiber-Tech Construction) |
| Included Components | Carry Bag, Repair Patch |
| Item Weight | 8.91 pounds |
| UPC | 078257328062 |
8. Warranty and Support
8.1. Warranty Information
This Intex air mattress comes with a 1-year limited warranty from the date of purchase. The warranty covers manufacturing defects in materials and workmanship. Please retain your proof of purchase for warranty claims.
8.2. Customer Support
For further assistance, product inquiries, or warranty claims, please visit the official Intex website or contact their customer service department. Contact information can typically be found on the product packaging or the Intex brand store page on Amazon.
Visit the Intex Store on Amazon for more information.
Related documents64131ED
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.