Sharp KH-6I19FT0K-EU Induction Hob User Manual

1. Introduction

This user manual provides essential information for the safe and efficient operation of your Sharp KH-6I19FT0K-EU Induction Hob. Please read this manual thoroughly before installation and use, and keep it for future reference.

The Sharp KH-6I19FT0K-EU is a 60 cm wide induction hob featuring 4 cooking zones, PowerBoost function, and TouchControl sensor operation. Its ceramic glass surface is designed for easy cleaning, and the stainless steel side frame adds a modern aesthetic.

2. Important Safety Instructions

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, burns, or injury.

• Read all instructions before using the appliance.
• Do not touch hot surfaces. Use handles or knobs.
• To protect against electric shock, do not immerse cord, plugs, or the appliance in water or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
• Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner.
• The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter, or touch hot surfaces.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
• Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to "off", then remove plug from wall outlet.
• Do not use appliance for other than intended use.
• This appliance is intended for household use only.
• Ensure proper ventilation around the appliance.
• Do not place metallic objects such as knives, forks, spoons, and lids on the hob surface as they can get hot.
• Persons with pacemakers or similar medical implants should consult their doctor before using an induction hob.

3. Setup and Installation

The Sharp KH-6I19FT0K-EU induction hob is designed for built-in installation. Professional installation by a qualified electrician is highly recommended to ensure safety and compliance with local regulations.

3.1 Unpacking

Carefully remove the hob from its packaging. Inspect the appliance for any signs of damage. Do not install a damaged appliance. Keep packaging materials away from children.

3.2 Installation Requirements

• Ensure the countertop material is heat-resistant.
• Provide adequate ventilation space below and around the hob.
• The electrical supply must match the specifications of the hob (220 Volts).
• Refer to the dimensional drawing for precise cutout dimensions.

Figure 3.1: Installation Dimensions. This diagram illustrates the required cutout dimensions for installing the Sharp KH-6I19FT0K-EU induction hob. The top view shows the hob's dimensions (520mm depth, 590mm width, 41mm height). The side view indicates the minimum clearances for installation: a minimum of 25mm from the front edge (Min. B) and 60mm from the rear edge (Min. A) to the cutout. The cutout itself should be 490mm deep and 560mm wide. Below the hob, a minimum clearance of 130mm is required for ventilation. A table provides specific minimum 'A' and 'B' values based on the cabinet material (Holz/Wood: Min. A 60mm, Min. B 25mm; Beton Keramik/Concrete Ceramic: Min. A 150mm, Min. B 40mm).

3.3 Electrical Connection

The hob must be connected to a properly grounded electrical outlet by a qualified electrician. Ensure the circuit breaker is off before making any connections.

4. Operating Instructions

Your Sharp induction hob features intuitive TouchControl sensor operation for precise cooking.

Figure 4.1: Overview of the Sharp KH-6I19FT0K-EU Induction Hob. This image displays the full induction hob with its four cooking zones clearly marked. The control panel is located at the bottom center, featuring various touch-sensitive buttons for operation. Each cooking zone is labeled with "Induction boost" indicating its capability.

4.1 Control Panel Overview

Figure 4.2: Detailed Control Panel. This close-up view shows the touch-sensitive control panel of the Sharp induction hob. Key controls include: Power On/Off button (rightmost), Pause/Play (leftmost), Minus (-) and Plus (+) buttons for adjusting power levels, a 'P' button for PowerBoost, a lock icon for child safety, and individual zone selection buttons arranged in a square pattern, with a timer icon in the center.

4.2 Turning On/Off

• To turn on: Touch the Power On/Off symbol (power icon). The display will light up.
• To turn off: Touch the Power On/Off symbol again.

4.3 Selecting a Cooking Zone and Adjusting Power

• Place an induction-compatible pan on the desired cooking zone.
• Touch the corresponding cooking zone selection button on the control panel.
• Use the Plus (+) and Minus (-) buttons to adjust the power level from 1 to 9.

4.4 PowerBoost Function

• The PowerBoost function provides up to 30% additional power for rapid heating.
• To activate: Select a cooking zone and then touch the 'P' button. The display for that zone will show 'P'.
• PowerBoost will automatically deactivate after a set period or when the temperature reaches a certain point to prevent overheating.

4.5 AutoHeatControl

This feature pre-programs common cooking operations like boiling, frying, melting chocolate, or keeping soup warm. Consult the full manual (if provided separately) for specific AutoHeatControl settings and how to activate them.

4.6 Timer Function

• The timer can be used as a minute minder or to set a cooking duration for a specific zone.
• To set: Touch the Timer symbol (clock icon) and use the Plus (+) and Minus (-) buttons to set the desired time.
• When the timer expires, an audible signal will sound, and the cooking zone may turn off automatically.

4.7 Child Lock

• To activate: Touch and hold the Child Lock symbol (lock icon) for a few seconds. The hob controls will be locked to prevent accidental operation.
• To deactivate: Touch and hold the Child Lock symbol again until the controls unlock.

5. Care and Maintenance

Regular cleaning and proper care will ensure the longevity and optimal performance of your induction hob.

5.1 Cleaning the Ceramic Glass Surface

• Always ensure the hob is cool before cleaning.
• For light spills and daily cleaning, wipe the surface with a soft cloth dampened with warm soapy water.
• For stubborn stains or burnt-on food, use a specialized ceramic hob cleaner and a hob scraper. Follow the cleaner's instructions.
• Rinse thoroughly with clean water and dry with a soft, clean cloth to prevent water marks.
• Avoid abrasive cleaners, scouring pads, or harsh chemicals as they can scratch or damage the surface.

5.2 Cleaning the Stainless Steel Frame

• Wipe the stainless steel frame with a soft cloth and mild detergent.
• Dry thoroughly to prevent water spots.
• Do not use abrasive cleaners or steel wool on the stainless steel.

5.3 General Care

• Do not drop heavy or sharp objects on the hob surface.
• Avoid dragging pots and pans across the surface to prevent scratches.
• Ensure the ventilation openings are not blocked.

6. Troubleshooting

Before contacting customer service, please refer to the following common issues and their solutions.

If the problem persists after attempting these solutions, please contact Sharp customer support.

7. Product Specifications

8. Warranty and Support

Warranty information for the Sharp KH-6I19FT0K-EU Induction Hob is typically provided within the product packaging or can be found on the official Sharp website. Please retain your proof of purchase for warranty claims.

For technical support, spare parts, or service inquiries, please contact Sharp customer service. Contact details can usually be found in the included user manual or on the manufacturer's official website.