Introduction
The Paulmann Batuno LED Cabinet Light Set provides efficient and versatile lighting for your kitchen or other cabinet areas. This set of three lights offers adjustable light color temperatures from warm white to neutral white (2200 K to 4000 K) and dimming capabilities, all controlled via an included remote. The lights are designed for easy installation with a direct 230 V connection via a plug-in transformer, ensuring uniform illumination of work surfaces.
Paulmann Batuno LED cabinet lights installed under kitchen cabinets, illuminating a countertop.
Safety Information
- Read all instructions carefully before installation and use.
- Ensure the power supply is disconnected before any installation or maintenance work.
- This product is designed for indoor use only.
- Do not expose the lights to excessive moisture or extreme temperatures.
- Only use the provided power adapter and components. Using unauthorized parts may void the warranty and pose a safety risk.
- Keep the remote control and small parts out of reach of children.
Package Contents
Verify that all items listed below are included in your package:
- 3 x Batuno LED Cabinet Lights
- 1 x Remote Control
- 1 x Wall Mount for Remote Control
- 1 x Plug-in Transformer (230V)
- Connection Cables
- Mounting Screws and Adhesive Pads
- Assembly Instructions (this manual)
All components included in the Paulmann Batuno LED cabinet light set.
Installation
The Batuno LED cabinet lights offer flexible installation options, either by screwing or using adhesive pads.
Step 1: Plan Placement
Determine the desired locations for your three cabinet lights. Ensure they are evenly spaced for optimal illumination of your work surface.
Step 2: Mounting the Lights
Choose your preferred mounting method:
- Screw Mounting: Mark the screw positions for each light. Drill small pilot holes if necessary. Secure each light using the provided screws.
- Adhesive Mounting: Clean the mounting surface thoroughly to ensure it is dry and free of dust or grease. Apply the adhesive pads to the back of each light and firmly press the lights into position.
Step 3: Connecting the Lights
- Connect the individual LED lights to the provided connection cables.
- Connect the cables from the lights to the plug-in transformer.
- Plug the transformer into a standard 230V wall outlet.
Step 4: Remote Control Wall Mount
The remote control can be stored in its wall mount for easy access. Choose a convenient location near your lights and secure the wall mount using either screws or adhesive pads.
Operating Instructions
The Batuno LED cabinet lights are controlled using the included remote control.
Remote Control Functions:
- ON/OFF Button: Press to turn the lights on or off.
- Dimming Buttons (Sun icon with + / -): Use these buttons to increase or decrease the brightness of the lights. There are ten dimming levels available.
- White Switch Button (W icon): Press this button to cycle through the four available light color temperatures: warm white (2200 K) to neutral white (4000 K).
Lights set to warm white using the remote control.
Lights set to neutral white using the remote control.
Maintenance
To ensure the longevity and optimal performance of your Paulmann Batuno LED cabinet lights, follow these simple maintenance guidelines:
- Cleaning: Disconnect the power before cleaning. Use a soft, dry, or slightly damp cloth to wipe the surfaces of the lights. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electronic components.
- Bulb Replacement: The LED bulbs are integrated and not user-replaceable. If a light fails, the entire unit may need to be replaced.
- Storage: If storing the lights for an extended period, keep them in a dry, cool place away from direct sunlight.
Troubleshooting
If you encounter issues with your Batuno LED cabinet lights, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on. | No power supply. Remote control battery is dead. Loose connection. | Check if the transformer is properly plugged into a live outlet. Replace the remote control battery. Ensure all cables are securely connected. |
| Lights flicker or dim unexpectedly. | Unstable power supply. Faulty connection. | Ensure the power outlet is stable. Try plugging into a different outlet. Check all cable connections for tightness. |
| Remote control not responding. | Remote control battery is dead. Obstruction between remote and lights. Remote not paired (unlikely for this product, but possible). | Replace the remote control battery. Ensure a clear line of sight between the remote and the lights. Refer to specific pairing instructions if provided (not typically required for this model). |
| Cannot change light color or brightness. | Remote control battery is low. Incorrect button pressed. | Replace the remote control battery. Ensure you are pressing the correct 'W' button for color and 'Sun' buttons for brightness. |
If the problem persists after trying these solutions, please contact Paulmann customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | Paulmann |
| Model Number | 92127 |
| Product Dimensions (L x W x H) | 7 x 7 x 1.5 cm (per light) |
| Item Weight | 39 g (per light) |
| Number of Items | 3 (lights) |
| Color | White |
| Voltage | 230 Volts (input), 24 Volts (output to lights) |
| Power | 6.3 Watts (total for 3 lights, 3 x 2.1W) |
| Luminous Flux | 3 x 180 lm (total 540 lm) |
| Special Features | Dimmable, Adjustable White Color Temperature (2200 K - 4000 K) |
| Plug Type | AC (with plug-in transformer) |
| Installation Type | Under-cabinet (screw or adhesive mount) |
| Batteries Required | No (for lights), Yes (for remote control, not included) |
| Country of Origin | China |
Product dimensions and component overview.
Warranty
The Paulmann Batuno LED Cabinet Light Set comes with a 5-year warranty from the date of purchase. This warranty covers manufacturing defects and material faults under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.
Customer Support
For further assistance, technical support, or warranty inquiries, please contact Paulmann customer service. You can find contact information on the official Paulmann website or through your retailer.
