FINESSY Modern Black Kitchen Soap Dispenser Set with Tray

1. Product Overview

The FINESSY Modern Black Kitchen Soap Dispenser Set is designed to provide a functional and aesthetically pleasing solution for dispensing hand soap, dish soap, lotion, or other liquids in your kitchen or bathroom. This set includes two refillable pump bottles, a coordinating tray, a set of waterproof labels, and a collapsible funnel for easy refilling.

Image 1.1: The FINESSY Modern Black Kitchen Soap Dispenser Set, showcasing the two bottles, tray, and gift packaging.

2. Package Contents

Upon unboxing, please ensure all components are present:

• 2 x 17oz (500ml) Black Refillable Pump Bottles
• 2 x Black Pump Mechanisms
• 1 x White Marble-Effect Tray
• 18 x Waterproof Scandinavian-style Labels (various types)
• 1 x Collapsible Funnel

Image 2.1: An overview of the set's components, including the two bottles, tray, labels, and funnel.

3. Setup Instructions

3.1 Applying Labels

1. Ensure the bottle surface is clean and dry.
2. Carefully cut out the desired label from the provided sheet.
3. For optimal alignment, place a strip of masking tape parallel to the top edge of the bottle as a guide.
4. Carefully apply the decal onto the surface, starting from the top center and slowly moving downward and outward to remove any air bubbles.
5. Use a credit card or similar flat object to firmly press the decal, focusing pressure on the letters.
6. Slowly peel back the transfer tape. If any letter lifts, press the tape back down and apply more pressure before peeling again.

Image 3.1: The set of stylish waterproof labels provided with the dispensers.

3.2 Filling the Bottles

1. Remove the pump mechanism from the bottle.
2. Place the collapsible funnel into the bottle opening.
3. Carefully pour your desired liquid (hand soap, dish soap, lotion, etc.) into the bottle through the funnel. Do not overfill.
4. Remove the funnel and securely screw the pump mechanism back onto the bottle.

Image 3.2: The collapsible funnel provided for easy and mess-free refilling of the dispenser bottles.

4. Operating Instructions

4.1 Dispensing Liquid

1. Place your hand under the nozzle of the pump.
2. Press down firmly on the pump head to dispense the liquid. The pumps are designed for smooth and efficient dispensing, even with thicker liquids.
3. Release the pump head to allow it to return to its original position.

Image 4.1: A close-up of the pump mechanism dispensing liquid, demonstrating its efficiency.

5. Maintenance

5.1 Cleaning the Bottles and Tray

• The bottles and tray can be cleaned with mild soap and water.
• Wipe down the exterior of the bottles and the tray with a soft cloth.
• The tray is stain-resistant and non-slip, making it easy to clean and maintain.

Image 5.1: The marble-effect tray, highlighting its design and suitability for holding the dispensers.

6. Troubleshooting

6.1 Pump Not Dispensing

• Ensure the pump head is fully twisted open.
• Check if the dip tube inside the bottle is properly submerged in the liquid.
• If using a new bottle or after refilling, it may take several pumps to prime the mechanism and draw liquid up.
• If the liquid is too thick, it might impede the pump. Consider diluting slightly if appropriate for the liquid type.

6.2 Labels Lifting or Bubbling

• Ensure the bottle surface was completely dry and free of residue before application.
• When applying, press firmly from the center outwards to remove all air bubbles.
• If a label begins to lift, gently press it back down and smooth it out.

7. Specifications

8. Warranty and Support

For any questions, concerns, or support regarding your FINESSY product, please contact our customer service team. While specific warranty details are not provided in this manual, FINESSY is a USA-based small family business committed to customer satisfaction.

You can reach us via:

• Email: support@finessynyc.com
• Visit the FINESSY Store on Amazon: FINESSY Store