OLIXIS Criss Cross Legged Chair Instruction Manual

1. Introduction

Thank you for choosing the OLIXIS Criss Cross Legged Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new chair. Please read these instructions carefully before use and retain them for future reference.

This armless chair features a spacious, wide seat designed for comfort, allowing for various sitting positions, including cross-legged. It is height-adjustable and includes a swivel and rocking function, making it suitable for home offices, bedrooms, study rooms, and vanity areas.

2. Safety Information

• Always follow assembly instructions carefully to ensure proper setup and stability.
• This chair is designed for adult use and supports a maximum weight of 300 pounds (136 kg). Do not exceed this weight limit.
• Use the chair on a hard, flat floor surface to prevent tipping or instability.
• Keep small parts and packaging materials away from children to prevent choking hazards.
• Regularly check all bolts and screws to ensure they are tight. Retighten as necessary.

3. Product Components

Before assembly, ensure all parts are present and undamaged. If any parts are missing or damaged, please contact customer support.

Figure 1: Exploded view of the chair components, illustrating the seat, backrest, gas lift, star base, and various screws and tools required for assembly.

List of Components:

• Seat Cushion
• Backrest
• Gas Lift Cylinder
• Star Base (No Wheels)
• Assembly Hardware (screws, washers, Allen wrench)

4. Assembly Instructions

Assembly of the OLIXIS Criss Cross Legged Chair is straightforward. Please follow these steps carefully:

1. Attach the Backrest to the Seat: Align the backrest with the seat cushion and secure it using the provided screws and Allen wrench. Ensure a snug fit.
2. Insert the Gas Lift: Place the gas lift cylinder into the center hole of the star base.
3. Attach the Seat Assembly to the Gas Lift: Carefully place the assembled seat and backrest onto the top of the gas lift cylinder. Press down firmly to secure.
4. Verify Stability: Once assembled, sit on the chair to ensure all connections are secure and the chair is stable.

For visual guidance, an installation video is available on the product page.

5. Operating Instructions

Your OLIXIS Criss Cross Legged Chair offers several adjustable features for personalized comfort:

5.1. Height Adjustment

To adjust the seat height, locate the lever under the seat on the right side. While seated, pull the lever up to lower the seat. To raise the seat, stand up and pull the lever up. Release the lever at your desired height.

5.2. Swivel Function

The chair is designed with a 360-degree swivel function, allowing for easy rotation without moving the base.

5.3. Rocking Function

The chair features a rocking mechanism for added comfort during leisure time. To activate the rocking function, pull out the rotating base button located under the seat. Push the button back in to lock the chair in an upright position.

Figure 2: Visual guide to the chair's rocking and height adjustment features.

6. Maintenance and Care

To ensure the longevity and appearance of your OLIXIS Criss Cross Legged Chair, follow these maintenance guidelines:

• Cleaning: For fabric chairs, spot clean with a mild detergent and a damp cloth. For PU leather chairs, wipe with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
• Inspection: Periodically inspect all moving parts and fasteners. Tighten any loose screws or bolts.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or damage to the upholstery.
• Weight Distribution: Distribute your weight evenly on the seat to prevent undue stress on the chair's components.

7. Troubleshooting

If you encounter any issues with your chair, please refer to the following common problems and solutions:

• Chair is Wobbly: Ensure all assembly screws are tightened. Check that the gas lift is properly seated in the base.
• Height Adjustment Not Working: Verify that the gas lift lever is fully engaged or disengaged as required. Ensure no obstructions are preventing movement.
• Rocking Function Not Engaging/Disengaging: Check the rotating base button under the seat. Ensure it is pulled out to enable rocking or pushed in to lock.

If these steps do not resolve the issue, please contact OLIXIS customer support for further assistance.

8. Specifications

9. Warranty and Support

OLIXIS is committed to providing high-quality products. For any questions regarding your OLIXIS Criss Cross Legged Chair, including assembly, operation, or parts, please feel free to contact us. Our customer support team is ready to assist you.

Please refer to your purchase documentation for specific warranty details.