1. Introduction
The Tera Model 9000 is a high-performance omnidirectional desktop barcode scanner designed for efficient and hands-free scanning. It supports a wide range of 1D, 2D, and QR codes from various sources, including paper labels and digital screens. Its plug-and-play functionality ensures easy setup and compatibility with common operating systems and devices.
2. Package Contents
Verify that all items are present in the package:
- Tera Model 9000 Barcode Scanner x 1
- USB Cable x 1
- User Manual x 1
Image: The package includes the Tera Model 9000 barcode scanner, a USB cable, and a user manual.
3. Setup
The Tera Model 9000 barcode scanner is designed for plug-and-play operation, requiring no additional drivers or software installation.
- Connect the USB Cable: Insert the USB cable into the designated port on the back of the barcode scanner.
- Connect to Host Device: Plug the other end of the USB cable into an available USB port on your computer (PC or laptop) or POS terminal.
- Power On: The scanner will power on automatically and emit a short beep, indicating it is ready for use.
The scanner is compatible with Windows, iOS, Android, and Linux operating systems.
Image: The scanner connects directly to a laptop via its USB cable, ready for immediate use.
4. Operating Instructions
4.1 Scanning Barcodes
The Tera Model 9000 features 360° omnidirectional scanning, allowing for reliable barcode capture from various angles without needing precise alignment. It supports both 1D and 2D barcodes, including QR codes, from printed labels and digital displays.
Image: The scanner's omnidirectional design allows it to read barcodes from any angle around its scanning window.
Image: The scanner can capture 1D and 2D codes from both physical labels and digital screens.
4.2 Scanning Modes
The scanner offers two operational modes:
- Continuous Scan Mode: The scanner's light remains active, continuously scanning for barcodes. This mode is suitable for high-volume environments where items are frequently passed through the scanning area.
- Sensor-activated Scan Mode: The scanner's light activates only when a barcode is detected within its field of view, conserving power. This mode is ideal for situations where scanning is intermittent.
Image: Visual representation of Continuous Scan Mode for consistent scanning and Sensor-activated Scan Mode for power saving.
4.3 Data Editing Capabilities
The scanner supports various data editing functions to customize output, including adding prefixes or suffixes, and dropping leading or trailing characters. These functions are typically configured by scanning specific programming barcodes found in the full user manual (not included in this basic guide).
- Add Prefix: Inserts characters before the scanned data.
- Drop Leading Characters: Removes a specified number of characters from the beginning of the scanned data.
- Add Tab Suffix: Appends a Tab character after the scanned data.
- Add Suffix: Inserts characters after the scanned data.
- Drop Trailing Characters: Removes a specified number of characters from the end of the scanned data.
- Add Enter Suffix: Appends an Enter (carriage return) character after the scanned data.
Image: Illustrations of how data editing features modify barcode output.
4.4 Adjustable Scan Head
The scanner head can be adjusted by 30 degrees, allowing users to optimize the scanning angle for comfort and efficiency in various setups.
Image: The scanner head can be tilted up to 30 degrees for ergonomic scanning.
4.5 Volume Adjustment
The scanner's feedback sound volume can be adjusted to suit your environment. Refer to the full user manual for specific programming barcodes to change volume settings (Off, Low, Medium, High).
Image: Volume settings can be adjusted from off to high.
4.6 Keyboard Layout Support
The scanner supports multiple keyboard layouts to ensure correct data output for different regional settings. This feature is configured by scanning specific programming barcodes.
Image: The scanner supports various international keyboard layouts.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Scanner does not power on. | USB cable not properly connected or faulty. | Ensure the USB cable is securely connected to both the scanner and the host device. Try a different USB port or cable. |
| Scanner does not read barcodes. | Barcode is damaged, poorly printed, or not supported. Incorrect scanning mode. | Ensure the barcode is clear and undamaged. Verify the barcode type is supported (1D, 2D, QR). Check if the scanner is in the correct mode (Continuous or Sensor-activated). Adjust the item's position or angle. |
| Scanned data is incorrect or incomplete. | Incorrect keyboard layout setting. Data editing functions are active. | Ensure the scanner's keyboard layout matches your computer's keyboard layout. Review data editing settings (prefix, suffix, character drop) and disable if not needed. |
| No sound feedback. | Volume is set to 'Off'. | Refer to the full user manual to adjust the volume setting using programming barcodes. |
6. Specifications
- Model: 9000
- Scanning Capability: 1D, 2D, QR Codes
- Scanning Type: Omnidirectional 360°
- Connectivity: USB Wired
- Scan Rate: 1500 scans/second
- Compatible Devices: Desktop, Laptop, POS systems
- Operating Systems: Windows, iOS, Android, Linux
- Item Weight: 15.5 ounces
- Package Dimensions: 6.65 x 5.28 x 4.17 inches
- Manufacturer: Tera
7. Maintenance
To ensure optimal performance and longevity of your Tera Model 9000 barcode scanner, follow these maintenance guidelines:
- Cleaning: Use a soft, dry, lint-free cloth to clean the scanner's exterior. For the scanning window, use a soft cloth lightly dampened with water or a mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive materials that could scratch the window.
- Storage: Store the scanner in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Avoid dropping the scanner or subjecting it to strong impacts, as this can damage internal components.
- Cable Care: Do not bend or twist the USB cable excessively. Ensure it is not pinched or placed under heavy objects.
8. Warranty and Support
For warranty information, technical support, or to obtain a comprehensive user manual with advanced programming options, please contact Tera customer service through their official website or the retailer where the product was purchased. Please have your model number (9000) and purchase details ready.
