BODIOO XB-YK102
Contents
BODIOO Exercise Bike User Manual
Model: XB-YK102
Introduction
This manual provides essential information for the safe and effective assembly, operation, and maintenance of your BODIOO Exercise Bike. Please read this manual thoroughly before initial use and retain it for future reference.
Safety Information
- Consult a physician before starting any exercise program.
- Keep children and pets away from the equipment.
- Place the exercise bike on a flat, stable surface.
- Ensure all bolts and nuts are securely tightened before each use.
- Do not exceed the maximum weight capacity of 265 lbs (120 kg).
- Wear appropriate exercise attire and footwear.
- Stop exercising immediately if you feel faint, dizzy, or experience pain.
Parts List
Before assembly, ensure all parts are present and undamaged. Refer to the diagram below for identification.

Figure 1: Exploded view of BODIOO Exercise Bike components.
- Main Frame Assembly
- Front and Rear Stabilizers
- Seat Post and Saddle
- Handlebar Assembly with LCD Monitor
- Pedals (Left and Right)
- Assembly Tools (Wrench, Allen Key)
- Hardware (Bolts, Washers, Nuts)
Setup and Assembly
Follow these steps to assemble your exercise bike. It is recommended to have two people for certain steps.
- Attach Stabilizers: Secure the front and rear stabilizers to the main frame using the provided bolts and nuts. Ensure the rear stabilizer (with transport wheels) is correctly oriented.
- Install Saddle: Attach the saddle to the seat post using the provided hardware. Then insert the seat post into the main frame and secure it with the triangle knob.
- Mount Handlebar and Monitor: Secure the handlebar assembly to the front upright post. Connect the wires from the handlebar to the LCD monitor. Install batteries into the monitor (2x AAA, usually included) and then attach the monitor to the handlebar.
- Attach Pedals: Identify the left (L) and right (R) pedals. The left pedal has reverse threading. Screw the pedals firmly into the crank arms.

Figure 2: Attaching the rear stabilizer.

Figure 3: Installing the seat and adjusting its height.

Figure 4: Handlebar and LCD monitor installation.
Assembly Video Tutorial
For a visual guide on the assembly process, please watch the official installation video below:
Video 1: Exercise Bike 3 IN 1 Stationary Bike Folding Exercise Bike Installation Guide by TabaN (Seller).
Operating Instructions
Adjusting Resistance
The BODIOO Exercise Bike features 8 levels of adjustable magnetic resistance. To increase resistance, turn the tension control knob clockwise. To decrease resistance, turn it counter-clockwise.

Figure 5: Tension control knob for resistance adjustment.
LCD Monitor Functions
The LCD monitor tracks your workout progress. It displays:
- TIME: Duration of your workout.
- SPEED: Current cycling speed.
- DISTANCE: Total distance traveled during the workout.
- CALORIES: Estimated calories burned.
- PULSE: Your heart rate (measured by hand sensors on the handlebar).
- ODO (Odometer): Total accumulated distance.
Use the "MODE" button to cycle through display functions. "RESET" clears current workout data. "SET" is used for setting target values (refer to monitor's specific instructions for advanced settings).

Figure 6: LCD Monitor display and controls.
Folding and Storage
The bike is designed for easy folding and storage. To fold, remove the safety pin located near the main hinge, fold the frame, and re-insert the pin into the storage position to secure it. Use the transport wheels to move the folded bike.

Figure 7: Folded dimensions and transport wheels for easy storage.
Maintenance
- Cleaning: Wipe down the bike with a damp cloth after each use to remove sweat and dust. Avoid abrasive cleaners.
- Inspection: Regularly check all bolts, nuts, and moving parts for tightness and wear. Tighten as necessary.
- Lubrication: Periodically apply a small amount of silicone-based lubricant to moving parts if any squeaking occurs.
- Storage: Store the bike in a dry, cool place away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Squeaking/Noise during operation | Loose bolts or lack of lubrication. | Check and tighten all bolts. Apply silicone lubricant to moving joints. |
| LCD Monitor not displaying | Dead batteries or loose wire connection. | Replace batteries (2x AAA). Check that all monitor wires are securely connected. |
| Pedals feel loose | Pedals not tightened correctly. | Ensure pedals are screwed in tightly. Remember the left pedal has reverse threading. |
Specifications
- Brand: BODIOO
- Model Name: XB-YK102
- Resistance Mechanism: Magnetic
- Number of Resistance Levels: 8
- Maximum Weight Recommendation: 265 Pounds (120 kg)
- Product Dimensions (Unfolded): 29.9"D x 17.3"W x 46.4"H (75.9 cm D x 43.9 cm W x 117.9 cm H)
- Item Weight: 35.4 Pounds (16.06 kg)
- Adjustable Seat Height: Suitable for users from 4'9'' to 6'1'' (145 cm to 185 cm)
- Special Features: Calories Monitor, Portable, Distance Travelled Monitor, Foldable, Adjustable Seat, Adjustable Resistance Level
Warranty and Support
For warranty information, please refer to the documentation included with your product packaging or contact BODIOO customer support directly. Keep your purchase receipt for warranty claims.
For further assistance or inquiries, please visit the official BODIOO store on Amazon or contact their customer service.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.