8Bitdo Pro 2 Wired Controller for Xbox

Introduction

This manual provides instructions for the 8Bitdo Pro 2 Wired Controller for Xbox. This controller is officially licensed and designed for use with Xbox Series X, Xbox Series S, Xbox One, and Windows 10/11. It features Hall Effect joysticks and triggers, programmable back buttons, and a 3.5mm audio jack, offering a precise and customizable gaming experience.

Setup

Follow these steps to connect your 8Bitdo Pro 2 Wired Controller to your device:

1. Connect the USB Cable: Locate the USB-C port on the top of your 8Bitdo Pro 2 controller. Insert the provided USB-C cable into this port.
2. Connect to Device: Plug the other end of the USB cable (USB-A) into an available USB port on your Xbox console (Series X|S, Xbox One) or your Windows 10/11 PC.
3. Power On: The controller will automatically power on and establish a connection with your device. The Xbox button on the controller will illuminate to indicate a successful connection.
4. Audio Connection: For audio, plug your 3.5mm headset into the audio jack located at the bottom of the controller.

Operating the Controller

The 8Bitdo Pro 2 Wired Controller offers advanced features for enhanced gameplay:

• Hall Effect Joysticks: These joysticks utilize magnetic sensors to prevent stick drift and provide higher precision and durability compared to traditional potentiometers.
• Hall Effect Impulse Triggers: Experience precise and responsive trigger feedback with Hall Effect technology, enhancing immersion in games that utilize trigger vibration.
• Pro-level Back Buttons: The controller features two programmable back buttons (P1 and P2) located on the underside. These can be mapped to any other button for quick access during gameplay.
• Ultimate Software: Customize your controller settings using the 8Bitdo Ultimate Software, available on Xbox and PC. This software allows you to:
  • Map buttons to your preferred layout.
  • Adjust joystick sensitivity and dead zones.
  • Fine-tune trigger sensitivity.
  • Control vibration intensity.

Maintenance

To ensure the longevity and optimal performance of your 8Bitdo Pro 2 Wired Controller, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to wipe down the controller. For stubborn dirt, slightly dampen the cloth with water or a mild cleaning solution. Avoid harsh chemicals or abrasive materials.
• Cable Care: Always handle the USB cable by the connector, not the cable itself, when plugging or unplugging. Avoid sharp bends or kinks in the cable to prevent internal damage.
• Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

If you encounter issues with your controller, refer to the following common solutions:

• Controller Not Responding:
  • Ensure the USB cable is securely connected to both the controller and your device.
  • Try connecting the controller to a different USB port on your Xbox or PC.
  • Restart your Xbox console or PC.
• Buttons or Joysticks Not Working Correctly:
  • Check for any physical obstructions or debris around the buttons or joysticks.
  • Update the controller's firmware using the 8Bitdo Ultimate Software.
  • Calibrate the joysticks and triggers through the Ultimate Software.
• Audio Issues:
  • Ensure your headset is fully plugged into the 3.5mm audio jack.
  • Check your device's audio settings to ensure the controller is selected as the audio output/input.
  • Verify the mute switch on the controller (if present) is not engaged.

For further assistance, visit the official 8Bitdo support website.

Specifications

Warranty and Support

For warranty information and technical support, please refer to the official 8Bitdo website or contact their customer service directly. Keep your proof of purchase for any warranty claims.

Official 8Bitdo Website: www.8bitdo.com