1. Introduction
Thank you for choosing the Brightech Nova FL-NVA-BRS LED Floor Lamp. This manual provides essential information for the safe and efficient use of your new lamp. The Nova lamp features a modern design with three integrated LED light rings and a convenient 3-way dimmer function, offering versatile lighting for various indoor environments.
Image 1.1: The Brightech Nova FL-NVA-BRS LED Floor Lamp in Antique Brass finish.
2. Safety Instructions
Please read and understand all safety instructions before assembling, installing, or operating this lamp. Retain this manual for future reference.
- Always unplug the lamp from the electrical outlet before cleaning, performing maintenance, or attempting to move it.
- Do not use this lamp near water or in excessively damp environments.
- Ensure the lamp is placed on a stable, level surface to prevent tipping. The heavy base is designed for stability.
- This lamp is designed for indoor use only.
- The integrated LED light source is not replaceable. Do not attempt to disassemble the LED rings.
- The LED lights remain cool to the touch during operation, reducing burn risk.
- Keep packaging materials away from children.
3. Package Contents
Verify that all components are present and undamaged upon opening the package:
- Lamp Base
- Lamp Pole Sections (multiple, pre-wired with LED rings)
- Power Cord (integrated)
- Assembly Tools (if required)
4. Assembly Instructions
Assembly of the Brightech Nova lamp is straightforward. Follow these steps:
- Carefully unpack all components from the box and place them on a clean, flat surface.
- Connect the lowest lamp pole section to the lamp base. Twist clockwise until securely tightened.
- Continue connecting the remaining lamp pole sections, twisting each one clockwise until fully secured. Ensure the internal wiring connections are not pinched or damaged during this process.
- Once all pole sections are assembled, ensure the entire lamp structure is stable and upright.
- Plug the power cord into a standard electrical outlet.
Image 4.1: Detail of the stable, round lamp base.
5. Operating Instructions
The Brightech Nova lamp features a touch-sensitive switch for easy operation and a 3-way dimmer function.
- Power On/Off: Gently touch any part of the metal lamp pole or base to turn the lamp on. Touch again to turn it off.
- Dimmer Function: The lamp has three brightness levels. Each subsequent touch will cycle through the brightness settings (Low → Medium → High → Off).
Image 5.1: A hand demonstrating the touch control on one of the lamp's rings.
6. Maintenance
To ensure the longevity and appearance of your Brightech Nova lamp, follow these simple maintenance guidelines:
- Cleaning: Unplug the lamp before cleaning. Wipe the lamp's surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
- LED Lifespan: The integrated LED lights are designed for long-term use (up to 20,000 hours). No bulb replacement is necessary.
- Storage: If storing the lamp, disassemble it carefully and keep it in its original packaging in a dry, cool place.
7. Troubleshooting
If you encounter issues with your Brightech Nova lamp, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power to the outlet; lamp not plugged in; loose connection; faulty switch. | Check if the outlet is working; ensure the power cord is fully plugged in; verify all pole sections are securely tightened; contact support if the switch is unresponsive. |
| Dimmer function is not working. | Incorrect touch method; internal wiring issue. | Ensure you are touching the metal part of the lamp firmly and briefly; cycle through the touch sequence (on/off/dimming); contact support if the issue persists. |
| Lamp flickers. | Loose connection; unstable power supply. | Ensure all lamp sections are tightly connected; try plugging into a different outlet; contact support. |
8. Specifications
| Brand | Brightech |
| Model Number | FL-NVA-BRS |
| Product Dimensions | 10"D x 15"W x 74"H |
| Item Weight | 11.58 pounds |
| Finish Type | Gold Finish |
| Base Material | Metal |
| Shade Material | Brass |
| Light Source Type | LED (Integrated) |
| Wattage | 30 watts |
| Control Method | Touch |
| Special Feature | Dimmable, Touch Switch |
| Power Source | Corded Electric |
| Indoor/Outdoor Usage | Indoor |
| UPC | 850012486640 |
9. Warranty and Support
Brightech USA offers an industry-leading 3-year warranty covering defects, malfunctions, or sudden failures to your standing lamp when purchased through authorized channels. For warranty claims or technical support, please contact Brightech USA customer service.
For further assistance, please visit the official Brightech website or contact their customer support team directly.
