ASPL 26-inch 126 LED Rooftop Emergency Strobe Lights Bar Instruction Manual

1. Introduction

This manual provides instructions for the proper installation, operation, and maintenance of your ASPL 26-inch 126 LED Rooftop Emergency Strobe Lights Bar. This product is designed to enhance visibility and safety for various vehicles, including trucks, construction vehicles, tow pickups, and emergency vehicles. Please read this manual thoroughly before use to ensure safe and effective operation.

2. Safety Information

• Always ensure the light bar is securely mounted before vehicle operation.
• Do not operate the light bar if any components are damaged.
• Verify local regulations regarding the use of emergency and warning lights on vehicles.
• The magnetic base is not suitable for aluminum body vehicles. Ensure your vehicle's roof is made of ferrous metal for proper magnetic adhesion.
• Keep the power cable away from hot surfaces and moving parts.

3. Product Overview

The ASPL 26-inch 126 LED Rooftop Emergency Strobe Lights Bar features high-intensity Amber/White LEDs designed for superior visibility. It includes multiple flashing patterns and a durable, weatherproof construction.

Key Features:

• Super Visibility: 14 LED modules with 126 high-power LEDs provide 360° lighting, visible over 2000ft.
• High Quality Construction: Made from aluminum material with a rugged, sleek frame and IP68 weatherproof build for durability.
• Multiple Flashing Modes: 26 selectable patterns, including 3 traffic modes, with a last-used pattern memory function.
• Easy Installation: Features 4x7 strong magnets with large rubber suction cups for secure magnetic mounting. Includes a 16.4 ft heavy-duty cable.

Figure 3.1: Super Visibility with 126 High Brightness LEDs and TIR Optical Lenses.

Figure 3.2: Detailed view of 14 LED modules with 126 high brightness chips and TIR optical lenses.

4. Setup and Installation

The light bar is designed for magnetic mounting on a vehicle's rooftop. Ensure the mounting surface is clean, dry, and made of ferrous metal to ensure strong adhesion.

Installation Steps:

1. Prepare Mounting Surface: Clean the vehicle's rooftop where the light bar will be placed. Ensure it is free of dirt, dust, and moisture.
2. Attach Brackets: The light bar comes with pre-attached magnetic suction cup bases. These bases feature 4x7 strong magnets and thick rubber suction cups for stability.
3. Position Light Bar: Carefully place the light bar on the desired location on the vehicle's roof. The strong magnets will secure it in place.
4. Route Power Cable: Route the 16.4 ft heavy-duty power cable into the vehicle's cabin, ensuring it does not interfere with doors or windows.
5. Connect to Power: Plug the cigarette lighter adapter into your vehicle's 12V power socket.

Figure 4.1: Magnetic mounting system with 28 high-strength magnets and rubber bases.

Important Note:

The magnetic base is designed for ferrous metal surfaces. It does not apply to aluminum body vehicles. Always ensure a secure fit before driving, especially at higher speeds. Testing indicates stability up to 80 mph.

5. Operating Instructions

The light bar is controlled via a double switch button located on the cigarette lighter plug.

Controls:

• ON/OFF Switch: Use this switch to power the light bar on or off.
• Pattern Button: Press this button to cycle through the 26 available flashing patterns. The device features a memory function that recalls the last used pattern upon restart.

Figure 5.1: Controller with ON/OFF and pattern selection buttons for easy operation.

6. Maintenance

To ensure the longevity and optimal performance of your ASPL LED Strobe Lights Bar, follow these maintenance guidelines:

• Regular Cleaning: Clean the light bar and lenses periodically with a soft cloth and mild soap solution. Avoid abrasive cleaners that could scratch the surface.
• Inspect Mounting: Regularly check the magnetic bases and rubber suction cups for wear or damage. Ensure they are securely attached to the light bar and the vehicle.
• Cable Inspection: Examine the power cable for any signs of fraying, cuts, or damage. Replace if necessary.
• Weather Protection: While the unit is IP68 waterproof, prolonged exposure to extreme weather conditions can affect its lifespan. Store the light bar indoors when not in use for extended periods.

7. Troubleshooting

If you encounter issues with your light bar, refer to the following common troubleshooting steps:

• Light Bar Not Turning On:
  • Check if the cigarette lighter plug is fully inserted into the 12V socket.
  • Ensure the ON/OFF switch on the controller is in the 'ON' position.
  • Verify the vehicle's 12V socket is receiving power. Test with another device if possible.
  • Inspect the power cable for any visible damage.
• Patterns Not Changing:
  • Ensure the light bar is powered on.
  • Press the pattern button firmly to cycle through modes.
• Weak Magnetic Adhesion:
  • Ensure the vehicle's rooftop is clean and dry.
  • Confirm the vehicle's roof is made of ferrous metal, as the magnetic base is not compatible with aluminum surfaces.
  • Check the rubber suction cups for any damage or debris that might prevent a flush seal.

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact ASPL customer service directly. Keep your purchase receipt for warranty claims.