STANLEY FATMAX TradeLift Multifunctional Lifting Tool Instruction Manual

1. Introduction

The STANLEY FATMAX TradeLift is a versatile, multifunctional tool designed to assist with a wide range of tasks including lifting, leveling, holding, and spreading. It is engineered to enable single-person operation for demanding jobs such as cabinet installation, window fitting, or door hanging, providing support and precision where an extra pair of hands would typically be required. This manual provides essential information for the safe and effective use of your TradeLift tool.

Figure 1: The STANLEY FATMAX TradeLift tool.

2. Safety Information

Always read and understand all safety warnings and instructions before operating this tool. Failure to follow these instructions may result in serious injury or property damage.

• Maximum Load Capacity: Do not exceed the maximum lifting capacity of 150 kg (330 lbs). Overloading can cause tool failure and injury.
• Stable Placement: Ensure the base and lifting plate are placed on stable, level surfaces before applying load. Uneven surfaces can cause the load to shift or fall.
• Secure Load: Always ensure the object being lifted, held, or spread is securely positioned on the lifting plate and will not slip.
• Personal Protective Equipment (PPE): Wear appropriate safety gear, including safety glasses and gloves, when operating the tool.
• Clear Work Area: Keep the work area clear of obstructions and bystanders.
• Inspect Before Use: Before each use, inspect the tool for any signs of damage, wear, or loose components. Do not use a damaged tool.
• Controlled Release: Always use the controlled release mechanism for lowering objects to prevent sudden drops.
• Children and Unauthorized Users: Keep the tool out of reach of children and untrained individuals.

3. Product Overview

The TradeLift tool is constructed with a durable metal housing for professional strength and longevity. Key components include:

• Lifting Plate: The upper platform that supports the object being lifted or held.
• Base Plate: The stable foundation of the tool.
• Operating Handle: Used to raise the lifting plate.
• Fine Adjustment Lever: Allows for precise, small adjustments (2.5 mm per click) when lowering.
• Full Release Button: Recessed button for quick, complete lowering of the lifting plate.
• Spreading Arm: The adjustable arm used for spreading applications.

Figure 2: Key components of the TradeLift tool.

4. Setup

The STANLEY FATMAX TradeLift is ready for use out of the box. No assembly is required. Ensure the tool is clean and free from debris before use.

• Place the tool on a stable, flat surface.
• For spreading applications, ensure the spreading arm is correctly positioned and secured.

5. Operating Instructions

5.1. Lifting and Holding

1. Position the Tool: Place the TradeLift directly under the object you intend to lift or hold. Ensure the base plate is stable and the lifting plate is centered under the load.
2. Raise the Load: Squeeze the operating handle repeatedly to raise the lifting plate. The tool will lift objects up to 150 kg to a maximum height of 220 mm.
3. Secure the Load: Once the desired height is reached, the tool will automatically hold the load in place.

Figure 3: Lifting a cabinet with the TradeLift.

Figure 4: Supporting a large panel with multiple TradeLift tools.

5.2. Leveling (Fine Adjustment)

1. Initial Lift: Lift the object slightly above the desired level using the operating handle.
2. Fine Adjustment: To lower the object precisely, gently press the fine adjustment lever. Each press will lower the lifting plate by approximately 2.5 mm, allowing for accurate leveling.

Figure 5: Leveling a cabinet with fine adjustments.

5.3. Spreading

1. Configure for Spreading: Adjust the tool to its spreading configuration by positioning the spreading arm as needed.
2. Position the Tool: Place the tool between the two surfaces you wish to spread apart.
3. Apply Pressure: Squeeze the operating handle to extend the spreading arm, applying outward pressure. The tool can spread up to 220 mm.

Figure 6: Using the TradeLift for spreading applications.

5.4. Releasing the Load

To fully release the load and lower the lifting plate quickly, press the recessed full release button. This safety feature prevents accidental activation.

5.5. Video Demonstrations

6. Maintenance

Proper maintenance ensures the longevity and reliable performance of your TradeLift tool.

• Cleaning: After each use, wipe down the tool with a clean, dry cloth to remove dust, dirt, and debris. Avoid using harsh chemicals or abrasive cleaners.
• Lubrication: Periodically apply a light lubricant to moving parts, such as the lifting mechanism and pivot points, to ensure smooth operation.
• Storage: Store the tool in a dry, clean environment, away from extreme temperatures and direct sunlight.
• Inspection: Regularly check for any loose screws, bolts, or signs of wear on the lifting plates, base, and handle. Tighten any loose fasteners and replace worn parts if necessary.

7. Troubleshooting

If you encounter issues with your TradeLift, refer to the following common problems and solutions:

8. Specifications

• Model Number: FMHT83550-1 (STA183550)
• Material: Metal
• Maximum Lifting Capacity: 150 kg (330 lbs)
• Maximum Lifting Height: 220 mm
• Fine Adjustment: 2.5 mm per click
• Product Dimensions (LxWxH): 28.5 x 13 x 47 cm
• Item Weight: 2.5 kg
• Color: Yellow and Black

9. Warranty and Support

For warranty information, technical support, or to purchase replacement parts, please refer to the official STANLEY website or contact their customer service department. Keep your proof of purchase for warranty claims.