Everwell KT-618

Download PDF
Contents

Everwell KT-618 Universal A/C Remote Control User Manual

Model: KT-618

Introduction

The Everwell KT-618 is a universal remote control designed to operate a wide range of air conditioning units, including mini-split systems. With a vast database of 10,000 codes, it offers broad compatibility and features a modern design with a large, backlit LCD display for ease of use. This manual provides comprehensive instructions for setting up, operating, and maintaining your KT-618 remote control.

Product Features

  • 10,000 Codes in 1 Control: Compatible with most A/C brands.
  • Modern Design: New shape with a large LCD display and backlight.
  • Accurate Clock Display: Includes a function for timer On/Off.
  • Code Memory Function: Retains settings after initial setup.
  • Temperature Display: Shows indoor temperature in both °C and °F.
  • Advanced Functions: Sleep, Swing, and Vane functions.
  • Intelligent Modes: Intelligent Cooling and Intelligent Heating functions.
  • Wall Base Included: For convenient storage.
  • Power Source: Uses 2 x AAA Batteries (not included).

Setup Guide

1. Battery Installation

The KT-618 remote control requires two AAA batteries (not included) for operation.

  1. Locate the battery compartment cover on the back of the remote control.
  2. Slide the cover downwards to open the compartment.
  3. Insert two AAA batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
  4. Slide the cover back into place until it clicks securely.
Back of the Everwell KT-618 remote control with the battery compartment and wall mount attached.

Image: Rear view of the KT-618 remote control, showing the battery compartment and the included wall mount bracket.

The remote control can automatically search for the correct code for your A/C unit. This is the recommended method for initial setup.

  1. Ensure your A/C unit is powered on.
  2. Point the KT-618 remote control towards your A/C unit.
  3. Press and hold the "SET" button (or a similar button if "SET" is not present, refer to the remote's specific button layout) for approximately 3-5 seconds until the code number on the LCD display starts flashing.
  4. The remote will begin transmitting codes automatically. Observe your A/C unit. When the A/C unit responds (e.g., turns on, off, or changes mode), immediately press any button (e.g., "OK" or "POWER") to confirm the code.
  5. Test all functions of the remote control to ensure full compatibility. If some functions do not work, repeat the automatic search process to find a more suitable code.

3. Wall Base Installation

The included wall base provides a convenient storage solution for your remote control.

  1. Choose a suitable location on a wall, away from direct sunlight or heat sources.
  2. Use screws (not included) to securely mount the wall base to the wall.
  3. Place the remote control into the wall base for easy access and storage.
Front view of the Everwell KT-618 remote control wall mount.

Image: The wall mount bracket for the KT-618 remote control, designed for easy installation.

Operating Instructions

Once the remote is set up with the correct code, you can begin operating your A/C unit. The remote features a clear LCD display and intuitive buttons.

Front view of the Everwell KT-618 universal A/C remote control with its LCD screen displaying '74°F' and various function buttons.

Image: The front of the KT-618 remote control, showing the LCD screen and button layout.

Basic Functions

  • Power On/Off: Press the Power button (Power button icon) to turn the A/C unit on or off.
  • Temperature Adjustment: Use the "+" and "-" buttons to increase or decrease the desired temperature.
  • Mode Selection: Press the Mode button (often represented by a circular arrow or snowflake/sun icon) to cycle through operating modes (e.g., Cool, Heat, Fan, Dry, Auto).
  • Fan Speed: Use the Fan button to adjust the fan speed (e.g., Auto, Low, Medium, High).

Advanced Functions

  • Sleep Mode: Activates a quiet, energy-saving mode for comfortable sleep.
  • Swing Function: Controls the vertical oscillation of the air deflector.
  • Vane Function: Controls the horizontal position of the air deflector.
  • Timer On/Off: Set specific times for the A/C unit to turn on or off automatically. Refer to the on-screen prompts for setting the timer.
  • Intelligent Cooling/Heating: These modes optimize performance for cooling or heating based on ambient conditions.
  • °C/°F Toggle: Press the C/F button to switch the temperature display between Celsius and Fahrenheit.

Maintenance

Battery Replacement

Replace batteries when the remote's display becomes dim or the remote no longer responds to button presses. Always replace both batteries at the same time with new AAA batteries.

  • Follow the battery installation steps outlined in the "Setup Guide".
  • Dispose of used batteries responsibly according to local regulations.

Cleaning

To maintain the appearance and functionality of your remote control:

  • Wipe the remote control with a soft, dry cloth.
  • Do not use abrasive cleaners, solvents, or alcohol, as these may damage the surface or internal components.
  • Avoid exposing the remote to excessive moisture or direct sunlight.

Troubleshooting

ProblemPossible CauseSolution
Remote not responding.Batteries are dead or incorrectly inserted.Replace batteries with new AAA batteries, ensuring correct polarity.
A/C unit does not respond to remote.Incorrect code set; remote not pointed at unit; obstruction.Re-perform the automatic code search. Ensure direct line of sight to the A/C unit's receiver. Remove any obstructions.
Some functions do not work after code setting.The selected code is partially compatible.Repeat the automatic code search process to find a more compatible code. There are 10,000 codes, so multiple attempts may be needed.
Temperature display on remote differs from A/C unit.Minor calibration difference or specific code limitation.Adjust the temperature on the remote to compensate for the difference. If significant, try another code.

Specifications

  • Model: KT-618
  • Brand: Everwell
  • Compatible Devices: Air Conditioner (Mini Split)
  • Max Number of Supported Devices: 1
  • Power Source: 2 x AAA Batteries (not included)
  • Color: Beige
  • Item Weight: 3.84 ounces
  • Package Dimensions: 8.35 x 4.49 x 1.3 inches
  • Special Feature: Universal
  • Country of Origin: China

Support and Additional Resources

For further assistance or detailed instructions, please refer to the official product manual. You can access the digital version of the manual by scanning the QR code below or visiting the provided link:

QR code linking to the Everwell KT-618 instruction manual PDF.

Image: QR code for accessing the official KT-618 instruction manual PDF.

Official Instruction Manual (PDF): https://manuals.plus/m/3999eb477938ea0a81bc25de8b63a8fc4c7b3c7c676816004f38c2f1182fef56

For warranty information or direct support, please contact Everwell customer service through their official website or the retailer where the product was purchased.

© 2024 Everwell. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.