1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Schneider Electric X Series 15A 125V Wi-Fi Energy Monitoring Socket Outlet. This device integrates smart home technology to enhance your home's energy management and convenience. Please read this manual thoroughly before installation and use to ensure safe and optimal performance.
2. Safety Information
WARNING: RISK OF ELECTRIC SHOCK. IMPROPER INSTALLATION OR USE CAN BE DANGEROUS OR ILLEGAL.
- Installation must be performed by a qualified electrician or in accordance with local electrical codes.
- Always turn off power at the circuit breaker before installing or servicing the device.
- Ensure a neutral wire is present in the electrical box for proper operation.
- This device is rated for 15A, 125V. Do not exceed these ratings.
- Do not use in wet locations or outdoors unless specifically rated for such environments. This product is for indoor use only.
- Tamper-resistant receptacles are designed to prevent insertion of foreign objects. Do not attempt to bypass this feature.
3. Package Contents
Verify that all components are present in your package:
- Schneider Electric X Series 15A 125V Wi-Fi Energy Monitoring Socket Outlet
- Matching screwless wall plate
- Installation Guide (this document)
Figure 3.1: Packaging of the Schneider Electric X Series Smart Wi-Fi Outlet.
4. Product Overview
The Schneider Electric X Series Wi-Fi Energy Monitoring Socket Outlet is designed to provide smart control and energy insights for your home. It features Matter certification for broad compatibility and built-in Wi-Fi for remote access.
Key Features:
- Remote Control: Monitor power usage and control connected devices via Wi-Fi using the Schneider Home app.
- Energy Monitoring: Real-time energy consumption data helps optimize power use.
- Matter Certified: Ensures seamless interoperability with other Matter-compliant smart home devices and ecosystems (Alexa, Google Home, Apple Home).
- No Hub Required: Direct Wi-Fi connectivity simplifies setup.
- Tamper-Resistant: Enhanced safety feature.
- Aesthetic Design: Modern, flush-facing finish with screwless cover plates.
Component Identification:
Figure 4.1: Front view of the outlet showing the controlled receptacle and power button.
Figure 4.2: Side view of the outlet, highlighting the Wi-Fi module and QR code for Matter pairing.
Figure 4.3: Back view of the outlet, showing wiring terminals and electrical ratings.
Matter Connectivity Overview:
Video 4.1: An overview of Matter technology and its benefits for smart homes, featuring Schneider Electric's X Series devices.
Color Options:
Video 4.2: A short video showcasing the various color options available for Matter-compliant devices, including the X Series outlet.
5. Setup & Installation
Installation of the X Series Wi-Fi Energy Monitoring Socket Outlet requires basic electrical knowledge. If you are unsure, consult a qualified electrician.
5.1 Pre-Installation Checklist
- Ensure power is OFF at the circuit breaker.
- Verify the presence of a neutral wire in your electrical box. This device requires a neutral wire for operation.
- Gather necessary tools: screwdriver, wire strippers, electrical tape.
5.2 Wiring Instructions
- Turn off power at the circuit breaker for the outlet you are replacing.
- Remove the existing wall plate and outlet.
- Carefully disconnect the wires from the old outlet. Identify the Line (hot), Load (if applicable), Neutral, and Ground wires.
- Connect the wires to the new X Series outlet using the back wire clamps or screw terminals:
- Line (Hot) Wire: Connect to the brass screw terminal.
- Neutral Wire: Connect to the silver screw terminal.
- Ground Wire: Connect to the green screw terminal.
- Note: For supply connections, use 12-14 AWG wires.
- Secure the outlet into the electrical box.
- Attach the screwless wall plate.
- Restore power at the circuit breaker.
5.3 Smart Home Integration (Matter & Schneider Home App)
The X Series outlet is Matter certified, allowing for flexible integration with various smart home ecosystems. You can use the Schneider Home app or your preferred Matter-compatible app (e.g., Apple Home, Google Home, Amazon Alexa).
Figure 5.1: The Schneider Home app displaying energy monitoring data for connected smart plugs.
Figure 5.2: The X Series outlet is compatible with major smart home platforms via Matter.
- Download the Schneider Home App: Search for "Schneider Home" in your device's app store.
- Create an Account: Follow the in-app instructions to create or log in to your Schneider Home account.
- Add Device: In the app, select the option to add a new device.
- Scan QR Code: Use the app to scan the Matter QR code located on the side of the outlet (refer to Figure 4.2). If the QR code is inaccessible after installation, you may find a copy on the packaging or a sticker provided.
- Follow On-Screen Prompts: The app will guide you through connecting the outlet to your Wi-Fi network (2.4 GHz required) and integrating it with your chosen smart home ecosystem.
- Alternative Pairing: If using another Matter-compatible app, initiate device pairing within that app and scan the Matter QR code.
Wi-Fi Network Requirements: The device operates on a 2.4 GHz Wi-Fi network. Ensure your router is configured to support this frequency or that your device is connected to the 2.4 GHz band during setup.
Matter Pairing Code: The Matter pairing code is typically found near the QR code. This code is essential for manual pairing if scanning fails or if you are using a system that requires manual entry.
Example Wi-Fi Configuration String (for advanced users/troubleshooting): WIF:I:T:WPA;S:SE-c82b9:6ba4cbc;P:TqTwgp6KO4wAGWnQ;H:false;OEM::SQR22:6U1XXW;
6. Operating Instructions
Once installed and connected, you can control your X Series outlet and monitor energy usage.
6.1 Manual Control
- The outlet features a physical power button (refer to Figure 4.1) to manually turn the controlled receptacle ON or OFF.
- The uncontrolled receptacle remains always on, functioning as a standard outlet.
6.2 App Control (Schneider Home or Matter-compatible App)
- Open the Schneider Home app or your preferred Matter-compatible smart home app.
- Select the X Series outlet from your device list.
- Toggle the power ON/OFF for the controlled receptacle.
- Access energy monitoring data to view real-time and historical power consumption.
- Set schedules, timers, or create custom automation routines based on your preferences.
6.3 Voice Control
If integrated with Amazon Alexa, Google Home, or Apple Home, you can use voice commands to control the outlet.
- For Alexa: "Alexa, turn on [Outlet Name]" or "Alexa, turn off [Outlet Name]".
- For Google Home: "Hey Google, turn on [Outlet Name]" or "Hey Google, turn off [Outlet Name]".
- For Apple Home: "Hey Siri, turn on [Outlet Name]" or "Hey Siri, turn off [Outlet Name]".
7. Maintenance
The Schneider Electric X Series outlet requires minimal maintenance.
- Cleaning: Wipe the device and wall plate with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Firmware Updates: Periodically check the Schneider Home app for available firmware updates to ensure optimal performance and security.
- Regular Checks: Ensure the wall plate is securely fastened and there are no visible signs of damage to the outlet or wiring.
8. Troubleshooting
If you encounter issues with your X Series outlet, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | No power at the circuit, incorrect wiring, or faulty device. | Check circuit breaker. Verify wiring connections (Line, Neutral, Ground). Ensure neutral wire is connected. If issues persist, contact support. |
| Cannot connect to Wi-Fi or app. | Incorrect Wi-Fi password, 5 GHz network selected, weak Wi-Fi signal, router issues, or Matter pairing issues. | Ensure you are connecting to a 2.4 GHz Wi-Fi network. Verify Wi-Fi password. Move device closer to router. Restart router. Try factory resetting the outlet (press and hold the power button for 10-15 seconds until indicator light changes). Re-attempt Matter pairing using the QR code or manual code. Temporarily disable mesh network features if experiencing issues. |
| Energy monitoring data is inaccurate or missing. | Device not properly configured, app synchronization issue, or Matter 1.0 limitation. | Ensure the device is fully integrated with the Schneider Home app. Check for app updates. Note that some third-party Matter 1.0 integrations may not fully support energy monitoring data. |
| Voice control not working. | Incorrect device name, not linked to voice assistant, or network issue. | Verify the device name in your smart home app. Ensure the Schneider Home skill/service is linked in your voice assistant app. Check network connectivity. |
| Outlet frequently disconnects from Wi-Fi. | Weak Wi-Fi signal, network interference, or router configuration. | Improve Wi-Fi signal strength (e.g., Wi-Fi extender, move router). Check for conflicting devices on your network. Ensure router firmware is up to date. |
9. Specifications
| Attribute | Value |
|---|---|
| Brand | Schneider Electric |
| Model Number | SQR441U1BKWM |
| Part Number | SQR441U1BKWM |
| Voltage | 125 Volts |
| Amperage | 15A |
| Wattage | 600 watts |
| Material | Plastic |
| Color | Black Matte |
| Item Weight | 13 ounces |
| Package Dimensions | 10.08 x 8.7 x 6.38 inches |
| Certification | REACH, RoHS, cUL |
| Compatible Devices | All (Matter-compatible) |
| Neutral Wire Required | Yes |
| Wi-Fi Frequency | 2.4 GHz |
| Indoor Use Only | Yes |
10. Warranty & Support
For warranty information and customer support, please refer to the official Schneider Electric website or contact their customer service directly. Keep your purchase receipt as proof of purchase.
Online Resources: Visit the Schneider Electric website for product registration, FAQs, and additional support materials.
