1. Introduction
Thank you for choosing the RAF R.8003 Infrared Cooker. This manual provides essential information for the safe and efficient operation of your new appliance. Please read it thoroughly before first use and keep it for future reference.
The RAF R.8003 Infrared Cooker offers versatile cooking capabilities with adjustable power from 100W to 3500W. Its ceramic plate ensures stable and precise heat delivery, making various cooking tasks easier, from simmering to deep frying, roasting, steaming, slow cooking, and grilling. It features high thermal efficiency, reaching up to 93%, for rapid cooking. A dedicated boiling water function can boil 1000ml of water in approximately five minutes.
Image 1.1: The RAF R.8003 Infrared Cooker shown with its packaging and a pan of food being cooked.
2. Important Safety Instructions
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
- Read all instructions carefully before using the appliance.
- Do not touch hot surfaces. Use handles or knobs.
- To protect against electrical shock, do not immerse cord, plugs, or the appliance in water or other liquid.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
- Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner.
- The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
- Do not use outdoors.
- Do not let cord hang over edge of table or counter, or touch hot surfaces.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
- Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to “off,” then remove plug from wall outlet.
- Do not use appliance for other than intended use.
- Notice: The ceramic plate is hot after cooking, please do not touch with your hand.
3. Product Features
- High Power Output: 3500W for rapid heating and efficient cooking.
- Adjustable Power: Power settings from 100W to 3500W to suit various cooking needs.
- Ceramic Cooktop: Durable and easy-to-clean ceramic surface for consistent heat distribution.
- Versatile Cooking Modes: Includes dedicated functions for frying, BBQ, soup, and a general function mode.
- Boiling Water Function: Capable of boiling 1000ml of water in approximately 5 minutes.
- Precise Timer: Adjustable timer from 1 to 180 minutes for controlled cooking.
- Explosion-Proof Panel: Integrated molding, high hardness, high temperature resistance, sudden cold and sudden heat resistance, non-burst corrosion resistance, abrasion resistance, and scratch resistance.
- Low Electromagnetic Radiation: Designed for safer home use, suitable for all users.
Image 3.1: The explosion-proof black crystal panel of the cooker, demonstrating its durability and resistance to scratches and high temperatures.
Image 3.2: The RAF Infrared Cooker in a kitchen setting, illustrating its low electromagnetic radiation feature for user reassurance.
4. Setup
- Unpack: Carefully remove the cooker from its packaging. Retain packaging for future storage or transport.
- Placement: Place the cooker on a stable, flat, heat-resistant surface. Ensure there is adequate ventilation around the appliance (at least 10 cm clearance from walls or other objects).
- Power Connection: Ensure the voltage of your power outlet matches the appliance's requirements (220V). Plug the power cord into a grounded electrical outlet.
- Initial Cleaning: Before first use, wipe the ceramic surface with a damp cloth.
5. Operating Instructions
The RAF R.8003 features a smart touch panel and a rotary knob for control.
Image 5.1: The control panel of the RAF R.8003 Infrared Cooker, showing various function buttons and the power adjustment knob.
Image 5.2: Detailed view of the smart touch panel, indicating specific cooking modes and timer controls.
- Power On/Off: Press the ON/OFF button to turn the cooker on or off. The display will illuminate.
- Select Cooking Mode: Press the desired function button: Fried, BBQ, Soup, or Function (for general cooking).
- Adjust Power/Temperature: For modes like Fried or BBQ, use the rotary knob (labeled with '+' and '-') to adjust the power level from 100W to 2200W. The Soup mode is typically pre-set and cannot be adjusted.
- Set Timer: Press the Timer button. Use the rotary knob to set the desired cooking time, from 1 to 180 minutes. The cooker will automatically turn off once the timer expires.
- Boiling Water Function: If available as a specific function, select it. This function is optimized for quickly boiling water.
- Inner and Outer Ring Heating: Some models may offer selection between inner and outer heating rings for different pot sizes. Refer to the control panel for this option.
- After Cooking: Turn off the cooker by pressing the ON/OFF button and unplug it from the power outlet. Allow the ceramic plate to cool completely before cleaning.
6. Maintenance and Cleaning
Proper maintenance ensures the longevity and performance of your infrared cooker.
- Always unplug the appliance and allow it to cool completely before cleaning.
- Ceramic Surface: Wipe the ceramic cooktop with a damp cloth and mild detergent. For stubborn stains, use a non-abrasive ceramic cooktop cleaner. Do not use abrasive pads, harsh chemicals, or steel wool, as these can scratch the surface.
- Body: Wipe the exterior body with a soft, damp cloth. Do not immerse the cooker in water or any other liquid.
- Ventilation Openings: Ensure the ventilation openings on the underside and sides of the cooker are free from dust and debris to prevent overheating. Use a soft brush or vacuum cleaner to clean them if necessary.
- Storage: Store the cooker in a dry place when not in use.
7. Troubleshooting
If you encounter issues with your RAF R.8003 Infrared Cooker, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Cooker does not turn on. | No power supply; Power cord not properly plugged in; Appliance malfunction. | Check if the power cord is securely plugged into a working outlet. Check your circuit breaker. If the problem persists, contact customer support. |
| Cooker not heating. | Incorrect mode selected; Power level too low; Overheat protection activated. | Ensure a cooking mode is selected and the power level is adjusted. If the cooker feels hot, unplug it and let it cool down before restarting. |
| Display shows an error code. | Internal error or sensor issue. | Note the error code, then turn off and unplug the cooker for a few minutes. Plug it back in and restart. If the error persists, contact customer support with the error code. |
| Unusual noise during operation. | Cooling fan operation; Loose internal component. | A slight fan noise is normal. If the noise is loud or unusual, turn off the cooker and contact customer support. |
8. Specifications
| Specification | Detail |
|---|---|
| Brand | RAF |
| Model Number | R.8003 |
| Power / Wattage | 3500 Watts |
| Voltage | 220 Volts |
| Material | Ceramic |
| Product Dimensions (L x W x H) | 42 cm x 18 cm x 7 cm |
| Weight | Approximately 550 grams |
| Number of Heating Elements | 1 |
| Control Type | Push Button & Rotary Knob |
| Heating Element Type | Radiant |
Image 8.1: Dimensions of the RAF R.8003 Infrared Cooker.
9. Warranty and Support
This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including the warranty period and coverage details.
For technical support, troubleshooting assistance, or warranty claims, please contact the retailer where you purchased the product or refer to the manufacturer's official website for contact information.
