Introduction
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your Veken 47.2" Adjustable Height Standing Desk. Please read this manual thoroughly before use to ensure proper function and safety.
Safety Information
Important Safety Precautions:
- Always use the child safety lock when the desk is not in use.
- Keep the desk away from heat sources.
- Do not place heavy objects on the desk that could cause it to tip over.
- Always follow the assembly instructions carefully to ensure the desk is stable and secure.
- Ensure no obstacles are in the path of the desk during height adjustment.
- Do not sit or stand on the desk.
- Maximum weight recommendation: 154 Pounds.
Package Contents
Verify that all components are present before beginning assembly:
- Desktop (composed of two boards)
- Desk Frame Components (legs, crossbar)
- Control Panel
- Cable Clip
- Feet Pads (4x)
- Headphone Hook
- Instruction for Using the Control Panel
- User Manual (this document)
- Assembly Hardware (screws, Allen wrench, etc.)
Image: Exploded view of desk components, showing desktop, frame, and accessories.
Setup and Assembly
Assembly typically takes 10-30 minutes. It is recommended to have two people for assembly due to the weight of the components.
- Prepare the Desktop: Place the two desktop boards on a soft, clean surface with the pre-drilled holes facing up. Align the boards and secure them according to the included hardware instructions.
- Attach the Legs: Secure the desk legs to the desktop using the provided screws. Ensure all connections are tight.
- Install the Control Panel: Mount the control panel to the underside of the desktop in the designated area.
- Connect Wiring: Connect all motor and control panel wiring according to the diagram in the separate "Instruction for Using the Control Panel" document.
- Attach Accessories: Install the headphone hook and cable clips as desired.
- Final Placement: Carefully flip the desk upright and place it in its desired location. Ensure the desk is level.
Video: Detailed installation guide for the Veken Electric Standing Desk.
Image: Desk dimensions, illustrating the adjustable height range and overall size.
Operating Instructions
Your Veken Standing Desk features electric height adjustment and memory presets for convenience.
Height Adjustment
- Use the Up (▲) and Down (▼) arrows on the control panel to adjust the desk height.
- The desk can be adjusted from a minimum height of 28.3 inches to a maximum height of 46.5 inches.
- The motor operates quietly (under 52 dB) for minimal disturbance.
Memory Presets
- To save a desired height: Adjust the desk to your preferred height, then press the "M" button followed by a number button (1, 2, 3, or 4). The height will be saved to that preset.
- To recall a saved height: Simply press the corresponding number button (1, 2, 3, or 4). The desk will automatically move to the saved position.
Image: Control panel for quick height adjustment and memory presets.
Video: Demonstration of the Veken Standing Desk's versatile height adjustment.
Maintenance
To keep your Veken Standing Desk in optimal condition:
- Cleaning: Wipe the desk surfaces with a damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Inspections: Periodically check all screws and connections to ensure they remain tight.
- Cable Management: Utilize the included cable clips to keep cords tidy and prevent them from interfering with the desk's movement.
Troubleshooting
If you encounter issues with your Veken Standing Desk, refer to the following common solutions:
- Desk Not Moving:
- Check all power connections to ensure the desk is properly plugged in.
- Verify that all motor and control panel cables are securely connected.
- Ensure the child safety lock is disengaged.
- Uneven Movement / Only One Leg Moving:
- This can occur if the transmission rod is not fully inserted or if there's an obstruction. Refer to the troubleshooting video below for detailed steps.
- Error Codes on Display:
- Consult the separate "Instruction for Using the Control Panel" document for a list of error codes and their corresponding solutions.
- Often, unplugging the desk for 30 seconds and plugging it back in can reset minor errors.
Video: Troubleshooting guide for when only one leg of the standing desk is moving.
Specifications
| Brand | Veken |
| Model Number | ODHOME123 |
| Product Dimensions (D x W x H) | 23.64"D x 47.24"W x 28.3"H |
| Adjustable Height Range | 28.3" to 46.5" |
| Maximum Weight Capacity | 154 Pounds |
| Material Type | Engineered Wood (Top), Carbon Steel (Base) |
| Lifting Mechanism | Electric |
| Noise Level (Motor) | Under 52 dB |
| Special Features | Adjustable Height, Cable Clip, Ergonomic, Memory Preset, Sedentary Reminder |
| Assembly Required | Yes (Recommended 2 people) |
| Product Care | Wipe with Damp Cloth |
Image: Desk demonstrating static load capacity of 176 lbs.
Image: Illustration of the premium materials and construction layers.
Warranty and Support
Warranty: The Veken 47.2" Standing Desk comes with a 2-year limited manufacturer's warranty.
Support: For any questions, concerns, or technical assistance, please contact Aborder Products, the seller, through your purchase platform or refer to the contact information provided with your product packaging.
