Moongiantgo JLZ 169

Moongiantgo Automatic Watering System for Potted Plants

Model: JLZ 169 | Brand: Moongiantgo

Introduction

This manual provides comprehensive instructions for the Moongiantgo Automatic Watering System, Model JLZ 169. This device is designed to automate the watering of potted plants, offering convenience and precision. It features a dual-pump system and flexible power options, including USB and AA batteries, making it suitable for various indoor and outdoor settings. Please read this manual thoroughly before setup and operation to ensure optimal performance and longevity of your device.

Specifications

Feature	Detail
Power Supply	USB cable, 4 x AA batteries (batteries sold separately)
Watering Duration	1-59 seconds, 1-99 minutes
Watering Interval	1-23 hours, 1-9 days
Tube Length	15 meters
Tube Diameter	4/6mm, 4/7mm
Water Flow Rate	0.3-0.8 Liters/minute
Water Pressure	≥30 psi
Operating Environment	5-50℃
Main Unit Dimensions	14.4 cm (L) x 10.2 cm (W) x 5 cm (H)
Main Unit Weight	275 grams
Main Unit Material	ABS+PP
Operating Noise	≤65 dB (within 30cm range)

Package Contents

Verify that all items listed below are included in your package:

Watering Timer Main Unit × 1
Tube Fixing Clips × 4
Filters × 2
Stoppers × 2
15m Tube × 1
USB Cable × 1
Drip Nozzles × 20
Tube Connectors × 20

All included accessories for the Moongiantgo Automatic Watering System — An overview of all included accessories: tube fixing clips, filters, 15m tube, USB cable, 20 drip nozzles, and 20 tube connectors, along with the main unit's dimensions.

Setup Instructions

Follow these steps to set up your automatic watering system:

Prepare the Main Unit: Place the main unit in a stable location near your plants. Ensure it is protected from direct sunlight and extreme weather conditions.
Power Supply: Connect the USB cable to the main unit and a power adapter (not included), or insert 4 AA batteries into the battery compartment.
Prepare the Water Source: Place a water container (e.g., a bucket or glass) with sufficient water near the main unit.
Install the Suction Tube: Insert one end of the 15m tube into the main unit's water inlet. Attach a filter head to the other end of the tube and place it into your water container.
Cut and Connect Tubes: Measure the distance from the main unit to each plant. Cut the 15m tube into appropriate lengths. Use the tube connectors to create branches for multiple plants.
Attach Drip Nozzles: Insert a drip nozzle into the end of each tube segment that will go into a plant pot.
Position Drip Nozzles: Insert each drip nozzle directly into the soil near the roots of your potted plants. Use tube fixing clips to secure the tubes in place if necessary.

Main unit features and power options — Detailed view of the main unit's features, including power supply options (USB and AA batteries), dual pump system, simple setting buttons, and a clip for secure placement.

Step-by-step installation guide for the watering system — A step-by-step visual guide for installing the watering system, showing how to cut tubes, connect nozzles, install filters, and place drip nozzles.

Automatic watering system connected to 20 potted plants — An illustration showing the automatic watering system connected to 20 potted plants, highlighting its capacity.

Operating Instructions

The Moongiantgo Automatic Watering System allows for easy scheduling of watering times and intervals. The dual pump system enables two independent watering schedules (A and B) for different plant needs.

Setting Watering Schedules

Use the buttons on the main unit to set your desired watering parameters:

ON/OFF Button: Press to turn the system on or off.
SET Button: Press to enter setting mode. Use this to cycle through watering duration and interval settings for both Pump A and Pump B.
'+' and '-' Buttons: Use these buttons to adjust the values (seconds, minutes, hours, days) for watering duration and interval.
MA Button: Manual watering. Press to initiate immediate watering.
MB Button: Manual watering. Press to initiate immediate watering.

Watering Duration: Can be set from 1 second to 59 minutes (for seconds) or 1 to 99 minutes (for minutes). This determines how long the pump will run during each watering cycle.

Watering Interval: Can be set from 1 hour to 23 hours (for hours) or 1 to 9 days (for days). This determines the frequency of watering cycles.

The dual pump system allows you to set two distinct schedules. For example, Pump A can water delicate plants for a short duration every day, while Pump B can water succulents for a longer duration every few days.

Moongiantgo Automatic Watering System main unit display — The Moongiantgo Automatic Watering System main unit, showing the digital display for setting watering times and intervals. It supports both USB and battery power.

Maintenance

Regular maintenance ensures the longevity and efficient operation of your watering system.

Clean Filters: Periodically check and clean the water filters to prevent blockages and ensure consistent water flow.
Inspect Tubes and Nozzles: Regularly inspect the tubes and drip nozzles for any blockages, kinks, or damage. Clean or replace as needed.
Water Source: Ensure the water reservoir is clean and free of debris to prevent contamination of the system.
Battery Check: If using batteries, check their charge regularly and replace them when low to avoid interruption of watering schedules.
Storage: If storing the system for an extended period, drain all water, clean components, and store in a dry, cool place.

Troubleshooting

If you encounter issues with your watering system, refer to the following common problems and solutions:

Problem	Possible Cause	Solution
No water flow	Pump not running, clogged filter, kinked tube, empty water reservoir.	Check power supply (USB/batteries). Clean filter. Straighten tubes. Refill water reservoir.
Inconsistent water flow	Partially clogged filter or nozzle, low water level, air in tubes.	Clean filters and nozzles. Ensure sufficient water in reservoir. Prime the system by running manual watering to remove air.
System not turning on	No power, dead batteries, loose USB connection.	Check USB connection. Replace batteries. Ensure ON/OFF button is pressed.
Watering schedule not activating	Incorrect settings, system turned off.	Verify watering duration and interval settings. Ensure the system is turned ON.
Water pressure is weak	Pump limitation, too many drip nozzles, main unit placed too high above water source.	The pump has a specific pressure rating. For optimal performance, ensure the main unit is not significantly higher than the water source. Consider reducing the number of active drip nozzles if flow is too low for all.

Warranty and Support

The Moongiantgo Automatic Watering System comes with a 1-year warranty from the date of purchase.

Customer Support

If you have any questions about the product, require assistance with setup, operation, or troubleshooting, please do not hesitate to contact us. We aim to respond to all inquiries within 24 hours.

For inquiries regarding orders or product support, please contact us via your Amazon Order History:

Go to your Order History.
Locate the Moongiantgo Automatic Watering System product.
Select the seller (Moongiantgo 2020JP) and choose the 'Ask a question' option.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.