JONR ED12 Wet Dry Vacuum Cleaner User Manual

1. Introduction and Overview

Thank you for choosing the JONR ED12 Wet Dry Vacuum Cleaner. This cordless, self-propelled, and versatile cleaning device is designed to simplify your hard floor cleaning routine. It combines vacuuming and mopping in one step, ensuring efficient and thorough cleaning with its innovative features like two-tank technology and edge-to-edge cleaning capabilities.

This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your JONR ED12 vacuum cleaner. Please read it thoroughly before first use and keep it for future reference.

Figure 1.1: JONR ED12 Wet Dry Vacuum Cleaner and included accessories.

2. Safety Instructions

To reduce the risk of fire, electric shock, or injury, always follow basic safety precautions when using an electrical appliance. This includes:

• Do not use outdoors or on wet surfaces.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer's recommended attachments.
• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Turn off all controls before unplugging.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without filter in place.
• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the appliance.

3. Package Contents

Carefully unpack your JONR ED12 Wet Dry Vacuum Cleaner and check that all items are present and in good condition. The package should include:

• JONR ED12 Main Body x1
• Charging Base x1
• Cleaning Brush x1
• Charger x1
• Additional Brush Roller x1 (may vary by package)

Figure 3.1: All components included in the JONR ED12 package.

4. Setup

4.1 Assembly

1. Insert the handle into the main body until it clicks securely into place.
2. Ensure the clean water tank and dirty water tank are properly seated in their respective compartments.

4.2 Charging the Device

Place the JONR ED12 onto the charging base. Connect the charger to the charging base and plug it into a power outlet. The battery indicator on the display will show charging status. A full charge typically takes several hours. The device has a runtime of approximately 25-30 minutes on a full charge.

4.3 Filling the Clean Water Tank

Remove the clean water tank (850ml capacity) from the main body. Open the tank cap and fill it with clean water. For enhanced cleaning, you may add a small amount of non-foaming floor cleaning solution suitable for wet vacuums. Do not exceed the MAX fill line. Close the cap securely and reinsert the tank into the vacuum cleaner.

Figure 4.1: Clean water tank (850ml) and dirty water tank (450ml) capacities.

5. Operating Instructions

5.1 Powering On/Off

Press the ON/OFF key on the handle to power on the device. Press it again to power off.

5.2 Mode Selection

The JONR ED12 offers two cleaning modes:

• Auto Mode: This is the default mode for general cleaning. The vacuum automatically adjusts suction power and water flow based on the detected mess.
• Max Mode: For tougher stains and heavily soiled areas, switch to Max Mode for increased suction and water output.

Press the Mode key on the handle to switch between Auto Mode and Max Mode.

Figure 5.1: Two cleaning modes for various situations.

5.3 Cleaning Process

Tilt the vacuum cleaner back to engage the brush roller. Slowly push and pull the vacuum across the hard floor surface. The device will dispense clean water, scrub the floor, and then vacuum up the dirty water and debris into the dirty water tank. The two-tank technology ensures you always clean with fresh water, preventing secondary contamination.

Figure 5.2: Never clean with dirty water thanks to two-tank technology.

Figure 5.3: The JONR ED12 effectively cleans multiple sealed hard floor types.

5.4 Edge Cleaning

The JONR ED12 features an edge-to-edge cleaning design, allowing the brush roller to reach close to baseboards and corners, minimizing uncleaned areas. Simply guide the vacuum along the edges of your room for thorough cleaning.

Figure 5.4: Edge cleaning design for thorough cleaning along walls and corners.

5.5 Self-Cleaning Function

After each use, it is recommended to run the self-cleaning cycle. Place the vacuum back on its charging base. Press the Self-Cleaning Key (often combined with the Mode key) to initiate the cycle. The vacuum will automatically clean the brush roller and internal pathways, ensuring hygiene and preventing odors. This process typically takes less than 35 seconds.

Figure 5.5: Mess-Free Self-Cleaning with one-touch start.

6. Maintenance

Regular maintenance is crucial for the longevity and optimal performance of your JONR ED12 vacuum cleaner.

6.1 Emptying and Cleaning the Dirty Water Tank

After each use, or when the dirty water tank (450ml capacity) is full, remove it from the main body. Open the tank and dispose of the dirty water. Rinse the tank thoroughly with clean water. It is important to clean the metal strips on the side of the dirty water tank cover, as residue can accumulate and affect performance.

6.2 Cleaning the Brush Roller

Even with the self-cleaning function, it's advisable to periodically remove and manually clean the brush roller to remove any tangled hair or debris. Use the provided cleaning brush for this purpose. Ensure the brush roller is completely dry before reinserting it.

6.3 Cleaning the Filter

The filter located in the dirty water tank assembly should be rinsed under running water regularly. Allow it to air dry completely before reinstallation. A clogged filter can reduce suction power.

6.4 Disassembly for Deep Cleaning

For a more thorough cleaning, certain components can be disassembled. Refer to the video below for detailed instructions on how to disassemble the JONR ED12 for deep cleaning.

7. Troubleshooting

If you encounter issues with your JONR ED12, please refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact JONR customer support.

8. Specifications

• Brand: JONR
• Model: ED12
• Special Feature: Bagless
• Runtime: 30 minutes (approximate)
• Battery Life: 25 minutes (approximate)
• Form Factor: Handheld
• Noise Level: 80 dB
• Controller Type: Push Button
• Motor Horsepower: 1.26 horsepower
• Control Method: Touch
• Number of Speeds: 2
• Portable: Yes
• Number of Power Levels: 2
• Indoor/Outdoor Usage: Indoor
• Finish Type: Glossy
• Product Dimensions: 11.1 x 10.63 x 44.09 inches
• Item Weight: 14.97 pounds
• Batteries: 1 Lithium Ion battery required (included)

9. Warranty and Support

For warranty information and customer support, please refer to the warranty card included with your product or visit the official JONR website. Keep your purchase receipt as proof of purchase for any warranty claims.

If you require further assistance or have questions not covered in this manual, please contact JONR customer service through their official channels.