1. Introduction
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your GAOMON Queen Bed Frame with Natural Rattan Headboard and LED Lights. Please read all instructions carefully before assembly and retain this manual for future reference.
2. Safety Information
- Do not load more than 1000 pounds onto the bed frame.
- Exercise caution around sharp edges on the rattan headboard during assembly and use.
- Follow all assembly instructions precisely to ensure stability and prevent noise from the wooden slats.
- Keep small children and pets away from assembly area.
- Ensure all connections are secure before use.
3. Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- Headboard (with integrated rattan panels and LED light strip)
- Footboard
- Side Rails
- Wooden Support Legs (6 total)
- Wooden Slats
- Screw Fittings and Hardware
- Installation Tools (e.g., Allen wrench)
- Instruction Manual (this document)
4. Setup and Assembly
Assembly is designed to be straightforward. It is recommended to assemble the bed frame with two people.
4.1 Unpacking and Preparation
- Clear a spacious area for assembly.
- Carefully unpack all components and lay them out on a soft, clean surface to prevent scratches.
- Identify all parts against the package contents list.
4.2 Assembly Steps
- Attach Side Rails to Headboard and Footboard: Connect the side rails to the headboard and footboard using the provided screws and tools. Ensure all connections are finger-tight before fully tightening.
- Install Support Legs: Securely attach the 6 wooden support legs to the designated points on the bed frame. These legs are crucial for stability and weight distribution.
- Place Wooden Slats: Position the wooden slats across the bed frame. The closely spaced slats are designed to support your mattress directly, eliminating the need for a box spring. The slats are glued and fixed to prevent sliding and reduce noise.


Once all components are assembled, ensure all screws are fully tightened for maximum stability. The bed frame is now ready for your mattress.
5. Operating Instructions (LED Lights)
Your GAOMON Queen Bed Frame features an integrated LED light strip behind the rattan panels of the headboard, providing ambient lighting.
5.1 Powering On/Off
- Connect the LED light strip's power adapter to a standard electrical outlet.
- Use the included remote control or a compatible smartphone application (if applicable) to power the lights on or off.
5.2 Adjusting Settings
The LED lights offer various customization options:
- Color Selection: Choose from over 6000 colors to match your preference.
- Brightness Adjustment: Increase or decrease the light intensity.
- Dynamic Modes: Select from various pre-programmed lighting effects.
- Music Mode: Lights can react to sound (via built-in microphone or app).
- Timing Function: Set schedules for the lights to turn on or off automatically.


Refer to the separate LED light controller manual (if provided) for specific instructions on pairing with a smartphone app or using the remote control.
6. Maintenance
Proper care will extend the life and appearance of your bed frame.
- Cleaning: Wipe the wooden and rattan surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
- Dusting: Regularly dust the headboard and frame to prevent buildup.
- Tightening: Periodically check and tighten all screws and bolts to ensure the frame remains sturdy and noise-free.
- Rattan Care: Keep rattan away from direct sunlight and excessive moisture to prevent drying out or warping.
7. Troubleshooting
If you encounter any issues with your bed frame, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed frame is squeaking or noisy. | Loose connections; slats not properly seated. | Check and tighten all screws and bolts. Ensure all wooden slats are securely in place and not shifting. |
| LED lights are not turning on. | Power connection issue; remote control battery dead; light strip malfunction. | Verify the power adapter is securely plugged into an active outlet. Check remote control battery. If issues persist, contact customer support. |
| Bed frame feels unstable. | Incomplete assembly; loose support legs. | Re-check all assembly steps, ensuring all screws are fully tightened and support legs are firmly attached. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | XG05 |
| Size | Queen (U.S. Standard) |
| Product Dimensions | 84"L x 63"W x 41"H |
| Material | Metal, Rattan, Wood |
| Color | Rattan |
| Weight Capacity | Up to 1000 pounds |
| Special Feature | Squeak Resistant, LED Lights, Storage Headboard |
| Assembly Required | Yes |
| Compatible Mattress Size | Queen |
| Item Weight | 198 pounds |
9. Warranty and Support
GAOMON is committed to providing quality products and customer satisfaction. If you have any questions, concerns, or require assistance with your bed frame, please do not hesitate to contact our customer support team.
Please have your model number (XG05) and purchase information ready when contacting support to facilitate a quicker resolution.
For returns or issues related to shipping damage, please refer to the retailer's return policy where the product was purchased. For product-specific inquiries or technical support, contact GAOMON directly.