1. Introduction
The Flashpoint R2 Nano Touchscreen TTL Wireless Flash Trigger is a compact and advanced device designed for seamless integration with Sony cameras. It provides intuitive control over your flash system through a high-definition OLED touchscreen, supporting various flash modes and high-speed synchronization.
This manual provides detailed instructions for setting up, operating, and maintaining your R2 Nano trigger to ensure optimal performance and longevity.
2. Key Features
- High-Definition OLED Touchscreen: Offers unparalleled clarity, vibrant visuals, swift refresh rates, and adjustable screen brightness for both indoor and outdoor use.
- Intuitive Touch Interface: Navigate features like TTL, multiflash mode, HSS, front curtain sync, and rear curtain sync with simple swipes and taps.
- Quick Charge, Built-in Lithium Battery: Efficiently charges from 0% to 100% in approximately 2 hours via USB-C, ensuring readiness for extended shoots.
- Easy-Mounting, Durable Hotshoe: Designed for seamless mounting and optimal camera hotshoe protection.
- Two-Way TCM (TTL to Manual Conversion): Allows instant and effortless conversion between TTL and Manual modes for flexible shooting.
- Seamless 2.4GHz Wireless Connection: Utilizes the advanced Flashpoint R2 2.4GHz or Godox X Wireless system for reliable management of your lighting setup, including spare channel scanning to prevent interference.
- Firmware Updates: Easily perform firmware updates via the USB-C connection.
3. Setup Guide
3.1. Unboxing and Initial Inspection
Upon opening the package, ensure all components are present and undamaged. The package typically includes the R2 Nano trigger, a USB-C charging cable, and a protective case.
Image: Flashpoint R2 Nano Remote for Sony packaging. The image shows the product box with the Flashpoint logo and "R2 Nano Remote for Sony" text, along with an image of the trigger.
3.2. Charging the Device
The R2 Nano features a built-in lithium battery. Before first use, fully charge the device using the provided USB-C cable.
- Connect the USB-C cable to the charging port on the side of the R2 Nano.
- Connect the other end of the cable to a USB power source (e.g., computer, wall adapter).
- A full charge from 0% to 100% typically takes about 2 hours.
Image: Flashpoint R2 Nano charging via USB-C. The image shows the R2 Nano trigger connected to a USB-C charging cable, highlighting the charging port.
3.3. Mounting on Camera
The R2 Nano is designed for secure mounting on your camera's hotshoe.
- Slide the R2 Nano onto your camera's hotshoe.
- Ensure it clicks into place securely. The durable hotshoe design provides a firm connection.
- To remove, press the release button on the hotshoe and slide the trigger off.
Image: Flashpoint R2 Nano mounted on Sony camera hotshoe. The image displays the R2 Nano trigger securely attached to the hotshoe of a Sony camera.
4. Operating Instructions
4.1. Powering On/Off
Press and hold the M/O button on the side of the trigger to power it on or off.
4.2. Touchscreen Interface Overview
The R2 Nano features a high-definition OLED touchscreen for intuitive control. The main screen displays flash groups (A, B, C, etc.) and their respective power levels or settings.
Image: Flashpoint R2 Nano touchscreen display with labeled elements. This diagram highlights various elements on the R2 Nano's OLED screen, including Channel (CH1), Group (A, B, C), Output Power Level, Parameters (+/-), Sync Modes, Modeling Lamp, and Battery Indicator.
Image: Flashpoint R2 Nano physical controls labeled. This image shows the R2 Nano trigger with labels pointing to its physical components: Touch Screen, Select Dial, Power Switch (M/O), Test Button (lightning bolt icon), USB-C Charging port, and Installing/Detaching Button.
4.3. Adjusting Flash Settings
- Selecting a Group: Tap on the desired flash group (A, B, C, etc.) on the touchscreen.
- Adjusting Power: Once a group is selected, use the +/- icons on the touchscreen or rotate the physical dial to adjust the flash power.
- Changing Modes (TTL/Manual/Multi): Swipe left or right on the screen or navigate through the menu to select different flash modes. The two-way TCM function allows quick conversion between TTL and Manual modes.
- High-Speed Sync (HSS): The R2 Nano supports HSS up to 1/8000s. Activate HSS through the touchscreen menu.
- Front/Rear Curtain Sync: Select these sync modes via the touchscreen interface as needed.
Image: Finger interacting with Flashpoint R2 Nano touchscreen. The image shows a finger tapping on the R2 Nano's touchscreen, demonstrating the ease of control.
4.4. Wireless Connection and Channel Scanning
The R2 Nano uses a 2.4GHz wireless system to communicate with compatible Flashpoint/Godox strobes.
- Ensure your strobes are set to the same channel as the R2 Nano.
- Utilize the spare channel scanning function in the settings menu to find clear channels and avoid interference from other users.
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the touchscreen and body of the trigger. Avoid abrasive materials or harsh chemicals.
- Storage: When not in use, store the R2 Nano in its protective case to prevent scratches and damage. Keep it in a cool, dry place away from direct sunlight and extreme temperatures.
- Firmware Updates: Periodically check the Flashpoint website for new firmware updates. Connect the R2 Nano to your computer via USB-C to perform updates, which can improve performance and add new features.
- Hotshoe Protection: Always use the hotshoe cover when the trigger is not mounted on a camera to protect the electrical contacts from dust and damage.
6. Troubleshooting
- Trigger Not Firing:
- Ensure the R2 Nano is fully charged and powered on.
- Verify that the trigger is securely mounted on the camera's hotshoe.
- Check that the flash units are powered on and set to the correct channel and group as the R2 Nano.
- Confirm that the camera's flash settings are correctly configured.
- Touchscreen Unresponsive:
- Restart the device by powering it off and then on again.
- Ensure your fingers are clean and dry when interacting with the screen.
- If the issue persists, check for available firmware updates.
- Poor Wireless Connection:
- Perform a spare channel scan to identify and switch to a less congested channel.
- Ensure there are no major obstructions between the trigger and the flash units.
- Check the distance between the trigger and flash units; operate within the specified wireless range.
7. Specifications
| Brand | Flashpoint |
| Model | R2 Nano (Sony Compatible) |
| Product Dimensions | 5.25 x 4.25 x 2.5 inches |
| Power Source | Built-in Lithium Battery (USB-C rechargeable) |
| Flash Modes | TTL, Manual, Multi |
| Sync Speed | Up to 1/8000s (HSS) |
| Wireless System | Flashpoint R2 2.4GHz / Godox X Wireless System |
| Display | High-Definition OLED Touchscreen |
8. Warranty Information
Flashpoint products typically come with a limited manufacturer's warranty. Please refer to the warranty card included in your product packaging or visit the official Flashpoint website for detailed warranty terms and conditions. Keep your proof of purchase for warranty claims.
- 2-Year Protection Plan: Available for purchase.
- 3-Year Protection Plan: Available for purchase.
- Complete Protect: Monthly plan covering eligible past and future purchases.
Note: Protection plans are optional and may be purchased separately.
9. Customer Support
For technical assistance, troubleshooting, or service inquiries, please contact Flashpoint customer support. You can find contact information on the official Flashpoint website or in your product documentation.
Online Resources: Visit the Flashpoint Store on Amazon for additional product information and support.
