NOVGOBHOT MPJ-002
Contents
NOVGOBHOT Cat Wall Tree Furniture Set (Model MPJ-002) Instruction Manual
Comprehensive guide for assembly, use, and care.
Introduction
This manual provides detailed instructions for the assembly, installation, operation, and maintenance of your NOVGOBHOT Cat Wall Tree Furniture Set, Model MPJ-002. Designed to offer your feline companion an elevated and engaging environment, this wall-mounted system includes a cat house, a bridge ladder, scratching posts, and multiple steps. Please read this manual thoroughly before beginning assembly to ensure safe and correct installation.
Important Safety Information
- Always ensure all components are securely fastened before allowing your cat to use the furniture.
- Regularly inspect the furniture for any loose parts, wear, or damage. Tighten fasteners and replace damaged components immediately.
- Install the furniture on a sturdy wall capable of supporting the weight of the unit and your cat(s). Consult a professional if unsure about wall integrity.
- Keep small parts and tools away from children and pets during assembly.
- Do not exceed the recommended weight capacity (not specified, but implies general cat weight).
Package Contents
Before assembly, verify that all parts listed below are present and undamaged. Refer to the "Assembly Parts" diagram for visual identification.

Figure 1: Assembly Parts Diagram
This image displays all individual components included in the NOVGOBHOT Cat Wall Tree Furniture Set, each labeled with a number for easy identification during assembly.
- Cat House (1 unit)
- Bridge Ladder (1 unit)
- Scratching Posts (3 units)
- Wall-Mounted Steps/Shelves (5 units)
- Mounting Hardware (screws, anchors, brackets)
- Assembly Tools (hex wrench, etc.)
Setup and Installation
Careful installation is crucial for the stability and safety of your cat furniture. It is recommended to have a second person assist with mounting the larger components.
Recommended Tools (Not Included):
- Phillips Head Screwdriver
- Power Drill with appropriate drill bits for wall anchors
- Level
- Measuring Tape
- Pencil
- Stud Finder (highly recommended for secure installation)
Wall Type Compatibility:
This cat furniture is suitable for installation on various wall types, including concrete, natural stone, solid brick, sand-lime brick, and lightweight concrete. For gypsum board, particle board, veneer panel, asbestos board, hollow board, or solid board walls, ensure appropriate anchors are used. Attaching to wall studs is highly recommended for maximum stability.

Figure 2: Wall Type Compatibility
This image illustrates different wall materials where the cat furniture can be installed, emphasizing the need for appropriate mounting hardware for each type.
Assembly Steps:
- Unpack and Identify Parts: Carefully unpack all components. Refer to the "Assembly Parts" diagram (Figure 1) to identify each piece.
- Pre-Assembly (if applicable): Some components, such as the cat house or scratching posts, may require pre-assembly before wall mounting. Follow the specific instructions provided with your hardware kit.
- Plan Layout: Determine the desired arrangement of the shelves, house, bridge, and scratching posts on your wall. Use a pencil to mark the positions. Consider your cat's natural climbing paths and preferences.
- Mark Drill Holes: Hold each component against the wall at its planned position. Use a level to ensure it is straight, then mark the drill hole locations with a pencil.
- Drill Holes: Using a power drill and the appropriate drill bit for your wall type and anchors, drill holes at the marked locations. Ensure the depth is sufficient for the anchors.
- Clean Holes: Remove any dust or debris from the drilled holes using a brush or vacuum.
- Insert Anchors: Gently tap the wall anchors into the drilled holes with a hammer until they are flush with the wall surface.
- Mount Components: Align the component with the installed anchors. Insert screws through the component's mounting holes and into the anchors. Tighten securely with a Phillips screwdriver. For maximum stability, try to secure at least one mounting point of each major component into a wall stud if possible.
- Connect Bridge/Ladder: Attach the bridge ladder between the designated shelves or the cat house as per your desired layout. Ensure all connections are firm.
- Final Check: Once all components are mounted, gently test each piece for stability and ensure all screws are tight.

Figure 3: Installation Step Diagram
This diagram illustrates the general steps for wall mounting, including drilling, inserting anchors, and securing components.
Operating Instructions
The NOVGOBHOT Cat Wall Tree Furniture Set is designed to provide a stimulating and comfortable environment for your cat. Encourage your cat to explore the new structure by placing treats or toys on different levels.
- Climbing and Exploration: Cats can use the steps and scratching posts to climb, jump, and explore vertical spaces.
- Resting and Hiding: The enclosed cat house offers a secure and elevated spot for napping and privacy.
- Scratching: The sisal-wrapped scratching posts provide an appropriate outlet for your cat's natural scratching instincts, helping to protect your furniture.
- Observation: Elevated platforms allow cats to observe their surroundings from a safe vantage point, satisfying their natural curiosity.

Figure 4: Cats Utilizing the Wall Tree
This image demonstrates various ways cats can interact with the wall-mounted furniture, including climbing the scratching post, resting in the house, and traversing the bridge.

Figure 5: Cat in House
A cat is shown relaxing inside the wall-mounted cat house, highlighting its use as a comfortable retreat.
Maintenance
- Cleaning: Wipe the wooden surfaces with a dry cloth to remove dust and cat hair. Avoid using harsh chemicals or abrasive cleaners.
- Inspection: Periodically check all screws and mounting hardware to ensure they remain tight and secure. Re-tighten as necessary.
- Scratching Post Wear: Over time, the sisal rope on the scratching posts may show wear. While designed for durability, heavily worn posts may need replacement to maintain effectiveness and safety.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Furniture feels wobbly after installation. | Screws are not fully tightened; inadequate wall anchors; not secured to a stud. | Ensure all screws are tightened. Consider using stronger wall anchors (e.g., toggle bolts, zinc self-drilling drywall anchors) or relocating mounting points to align with wall studs for increased stability. |
| Parts do not fit together during assembly. | Incorrect orientation of parts; manufacturing defect. | Double-check the assembly diagram (Figure 1) to ensure parts are oriented correctly. If a part appears defective, contact customer support. |
| Cat is not using the furniture. | Cat needs encouragement; unfamiliarity with new structure. | Place treats, catnip, or favorite toys on the shelves and in the cat house. Gently guide your cat onto the lower levels. Allow time for your cat to adjust. |
Specifications
| Feature | Detail |
|---|---|
| Brand | NOVGOBHOT |
| Model Name | Cat Wall Shelves (MPJ-002) |
| Material | Natural Pine |
| Color | Natural Wood Color |
| Installation Type | Wall-Mounted |
| Number of Shelves | 5 (including house platform) |
| Item Weight | 23.5 Pounds (10.66 Kilograms) |
| Product Dimensions (LxWxH) | 9.84 x 16.2 x 20 inches (overall assembled dimensions may vary based on layout) |
| Assembly Required | Yes |
| Recommended Uses | Indoor climbing, resting, scratching for cats of all life stages. |

Figure 6: Product Dimensions
This image provides detailed measurements for the various components of the cat wall tree, including the main scratching post structure, the cat house, and individual shelves.
Warranty Information
The product comes with a standard manufacturer's warranty. For specific details regarding warranty coverage and duration, please refer to the documentation included with your purchase or contact NOVGOBHOT customer support. Please retain your proof of purchase for warranty claims.
Customer Support
If you have any questions, require assistance with assembly, or need to report a missing or damaged part, please contact NOVGOBHOT customer support. Refer to the contact information provided on the product packaging or the official brand website.
Brand: NOVGOBHOT
Model: MPJ-002
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.