1. Product Overview
The Bestier Outdoor Swivel Rocker Patio Chair is designed for comfort and durability in outdoor settings. It features a smooth gliding and 360-degree swivel mechanism, thick cushions, and integrated RGB LED lighting for enhanced ambiance.
Image 1.1: Bestier Outdoor Swivel Rocker Patio Chair. This image displays the complete chair with its blue cushions and brown wicker frame, highlighting its design.
2. Package Contents
Before assembly, ensure all components are present. Refer to the detailed parts list provided in the separate assembly instructions. The package typically includes:
- Chair Frame Components (Alloy Steel, Wicker)
- Seat Cushion (4-inch thick, high-density foam)
- Back Cushion
- 49.2 Ft RGB LED Strip
- LED Power Case
- Waterproof Carrying Bag for Power Supply
- Assembly Hardware (screws, washers, tools)
- Instruction Manual
3. Setup and Assembly
Assembly of the Bestier Outdoor Swivel Rocker Patio Chair is designed to be straightforward. For optimal results and safety, it is recommended to have two people for the assembly process.
3.1. Pre-Assembly Checks
- Unpack all components and lay them out on a clean, soft surface to prevent scratches.
- Verify all parts against the included parts list.
- Ensure you have the necessary tools (usually included).
3.2. Assembly Steps
Follow the detailed, easy-to-follow instructions provided in the separate assembly guide included with your product. General steps typically involve:
- Attach the base to the chair frame.
- Secure the backrest to the seat frame.
- Install the armrests.
- Place the cushions onto the chair, securing them with the integrated hook-and-loop fasteners.
- Install the LED strip (refer to section 3.3).
3.3. LED Strip Installation
The 49.2 Ft RGB LED strip is designed for easy integration. Carefully weave the LED strip through the wicker pattern of the chair. Connect the LED strip to the provided power case. The power case can be stored in the waterproof carrying bag, which fits into the waterproof pocket on the chair.
Image 3.1: Product Dimensions. This image illustrates the chair's dimensions: 33 inches deep, 30 inches wide, and 39.5 inches high, with a seat height of 18 inches. It also shows the waterproof carrying bag and pocket for the power supply.
4. Operating Instructions
4.1. Gliding and Swivel Function
The chair features an effortless gliding mechanism and a full 360-degree rotation. Simply sit back and gently push with your feet to initiate the gliding motion. The swivel function allows for easy rotation in any direction.
Image 4.1: Gliding and Swivel Function. This image shows the chair in motion, highlighting its smooth back-and-forth gliding and 360-degree swivel capabilities, along with water-repellent fabric and secure hold fasteners for cushions.
4.2. Cushion Features
The outdoor seating cushions are designed for comfort and durability. They feature a waterproof, fade-resistant cover and a 4-inch high-density foam seat cushion. Hook-and-loop fasteners are integrated to keep the cushions securely in place during use and gliding.
Image 4.2: Cushion Details. This image provides a close-up of the cushion features, including washable seat cushion covers, 4-inch soft foam cushion thickness, and 3.5-inch color-blocking wicker detail.
4.3. RGB LED Lighting System
The integrated 49.2 Ft RGB LED strip offers an enhanced lighting experience with various control options:
- Control Methods: The LED lights can be controlled via a dedicated APP, an IR remote control, or the physical controller on the power case.
- Music Synchronization: An embedded responsive microphone allows the LED colors to synchronize with your music.
- Modes: Enjoy 358 different lighting modes.
- Brightness: Adjustable brightness settings are available.
- Power Source: The LED strip is powered by 3 AA batteries (not included) or a power bank (not included).
- Timer Mode: Set a timer for the LED lights to turn off automatically.
Image 4.3: LED Control Options. This image showcases the chair with its vibrant LED lights and various control methods, including 358 modes, music-synced LED, adjustable brightness, USB controller, APP control, and IR remote control.
Image 4.4: LED Power and Waterproofing. This image highlights the IP65 outdoor waterproof rating of the LED strip, its power options (3 AA batteries or power bank), and the timer mode function.
5. Maintenance and Care
5.1. Cleaning the Chair Frame
The chair frame, made of alloy steel and woven wicker, can be cleaned by wiping it with a damp cloth. For stubborn dirt, a mild soap solution can be used, followed by rinsing with clean water and drying thoroughly.
5.2. Cushion Care
The cushion covers are washable. Remove the covers and follow the care instructions on the label. While the covers are fade-resistant and water-repellent, it is recommended to bring the cushions indoors during heavy rain or prolonged periods of inclement weather to maintain their longevity and prevent saturation.
5.3. LED Strip Care
The LED strip has an IP65 waterproof rating, making it resistant to dust and low-pressure water jets. However, avoid submerging the LED strip or the power case in water. Ensure the power case is securely stored in its waterproof carrying bag and pocket to protect it from moisture.
6. Troubleshooting
6.1. Cushions Getting Wet
While the cushion covers are water-repellent, they are not fully waterproof. During heavy rain or extended exposure to moisture, water may penetrate the cushions. To prevent this, always bring cushions indoors when rain is expected or during periods of non-use.
6.2. LED Lights Not Working
- Check the batteries in the power case. Ensure they are correctly inserted and have sufficient charge.
- Verify all connections between the LED strip, controller, and power case are secure.
- Ensure the power case is turned on.
- If using a power bank, ensure it is charged and properly connected.
6.3. Difficulty with Assembly
If you encounter difficulties during assembly, refer back to the detailed assembly instructions provided with your product. Ensure all parts are correctly oriented and that screws are not overtightened until all components are loosely fitted. Having a second person assist can significantly ease the process.
7. Specifications
| Feature | Specification |
|---|---|
| Brand | Bestier |
| Model Number | B0CYP8B4K3 |
| Color | Navy Blue |
| Material | Alloy Steel, Plastic (Wicker) |
| Item Weight | 16.56 kg (36.5 lbs) |
| Item Dimensions (L x W x H) | 50.8 x 76.2 x 99.4 cm (20 x 30 x 39.5 inches) |
| Weight Capacity | 120 kg (264 lbs) |
| Seat Cushion Thickness | 4 inches |
| LED Strip Length | 49.2 ft |
| LED Waterproof Rating | IP65 |
| Assembly Required | Yes |
| Included Components | Chair, Cushions, LED Strip, Power Case, Carrying Bag |
8. Warranty Information
Specific warranty details for the Bestier Outdoor Swivel Rocker Patio Chair are not provided within this manual. For information regarding product warranty, please refer to the warranty card included with your purchase or contact Bestier customer service directly.
9. Customer Support
Should you have any questions, require assistance with assembly, or need to report a missing or damaged part, please contact Bestier customer service. Contact information can typically be found on the product packaging, the Bestier official website, or the warranty card.
When contacting support, please have your product model number (B0CYP8B4K3) and purchase date readily available.