1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your PROFLO PFSH383 Multi-Function Shower Head. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product. Keep this manual for future reference.
Figure 1: PROFLO PFSH383 Multi-Function Shower Head. An angled view of the PROFLO PFSH383 multi-function shower head, showcasing its chrome finish and the various nozzle configurations for different spray patterns. A small lever for spray adjustment is visible at the bottom.
2. Safety Information
Observe the following safety precautions during installation and use:
- Always turn off the main water supply before beginning any installation or maintenance.
- Wear appropriate personal protective equipment, such as safety glasses, during installation.
- Ensure all connections are secure to prevent leaks.
- Do not use abrasive cleaners or tools that may damage the finish of the shower head.
- If you are unsure about any part of the installation process, consult a qualified plumber.
3. Package Contents
Verify that all components are present before beginning installation:
- PROFLO PFSH383 Multi-Function Shower Head (1)
- Installation Guide (This manual)
Note: Additional plumbing components such as shower arms, flanges, and sealing tape are typically sold separately and may be required for installation.
4. Installation Instructions
Follow these steps to install your PROFLO PFSH383 Multi-Function Shower Head:
- Prepare the Area: Turn off the main water supply to your bathroom. Remove any existing shower head by unscrewing it counter-clockwise from the shower arm. Clean any debris or old sealant from the shower arm threads.
- Apply Thread Sealant: Wrap plumber's tape (thread seal tape) clockwise around the threads of the shower arm 3-4 times. This helps prevent leaks.
- Attach the Shower Head: Carefully screw the PROFLO PFSH383 shower head onto the shower arm threads by turning it clockwise. Hand-tighten until snug. Do not overtighten, as this can damage the threads or the shower head.
- Check for Leaks: Turn the main water supply back on. Turn on the shower and check for any leaks around the connection point. If leaks occur, turn off the water, tighten the connection slightly, or reapply plumber's tape and re-test.
For visual assistance, refer to general shower head installation guides available online or consult a professional plumber.
5. Operating Instructions
The PROFLO PFSH383 features multiple spray patterns for a customized shower experience.
5.1 Changing Spray Patterns
To change the spray pattern, locate the small lever or rotating dial on the face of the shower head (refer to Figure 1). Gently move the lever or rotate the dial to cycle through the available spray settings. The PROFLO PFSH383 offers 5 distinct spray patterns.
5.2 Water Flow
This shower head is designed for a flow rate of 1.75 Gallons Per Minute (GPM) to optimize water usage while providing a satisfying shower.
6. Maintenance
Regular cleaning will help maintain the appearance and performance of your shower head.
6.1 Cleaning the Finish
- Clean the chrome finish with a soft, damp cloth and mild soap.
- Do not use abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
- Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
6.2 Cleaning Nozzles
Mineral deposits can accumulate in the nozzles over time, affecting spray performance. The rubber nozzles are designed for easy cleaning:
- Gently rub the rubber nozzles with your finger or a soft brush to dislodge any mineral buildup.
- For stubborn deposits, a solution of equal parts white vinegar and water can be applied to the nozzles for a short period (e.g., 30 minutes), then scrubbed and rinsed.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Pressure | Clogged nozzles; water restrictor (if applicable); low household water pressure. | Clean nozzles as described in Maintenance section. Check household water pressure. |
| Leaking at Connection | Improperly tightened connection; insufficient plumber's tape; damaged threads. | Turn off water, reapply plumber's tape, and tighten connection. Ensure threads are not damaged. |
| Spray Pattern Not Changing | Mechanism stuck due to mineral buildup. | Clean the shower head thoroughly, especially around the spray adjustment mechanism. |
8. Specifications
| Brand | PROFLO |
| Model Number | PFSH383 |
| Finish Type | Chrome |
| Material | Brass, Plastic |
| Shape | Round |
| Product Dimensions | 4.5"L x 4.5"W |
| Number of Settings | 5 |
| Flow Rate | 1.75 GPM (Gallons Per Minute) |
| Installation Type | Deck Mounted (Note: This specification from the source data seems incorrect for a shower head, which is typically wall-mounted. Assuming standard shower arm connection.) |
| Item Weight | 3.89 pounds |
| UPC | 781889920763 |
9. Warranty and Support
PROFLO products are designed for quality and durability. For specific warranty information, please refer to the warranty documentation included with your purchase or visit the official PROFLO website. For technical support or assistance, please contact PROFLO customer service through their official channels.
You can find more information about PROFLO products at the PROFLO Store on Amazon.
