Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your LOEWAY Full Metal Bed Frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference. The bed frame features a classical headboard and footboard design, sturdy metal slat support, and adequate under-bed storage. It is designed for use without a box spring.

Figure 1: LOEWAY Full Metal Bed Frame (White, Full size)
Safety Information
WARNING: Ensure the bed frame supports a maximum weight of 1000 pounds. Use caution around rounded corners and smooth surfaces. Ensure protective foot pads are securely in place to avoid potential hazards and protect flooring. Do not allow children to play on or under the bed frame during assembly or without supervision.
Package Contents
Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Headboard
- Footboard
- Side Rails
- Metal Slats
- Center Support Legs
- Installation Manual
- Screws and Allen Wrench
Video 1: Assembly overview for the Metal Bed Frame with Modern Iron-Art Headboard & Footboard. This video demonstrates the general assembly process for a similar metal bed frame.
Assembly Instructions
It is recommended to assemble the bed frame with two adults. Clear a spacious area and lay out all components on a soft surface to prevent scratches.
- Attach Side Rails to Headboard and Footboard: Connect the side rails to the headboard and footboard using the provided screws and Allen wrench. Ensure all connections are secure but do not fully tighten until all major components are in place.
- Install Center Support Legs: Attach the center support legs to the designated points on the central beam of the bed frame. These legs provide additional stability and prevent sagging.
- Place Metal Slats: Position the metal slats across the bed frame, ensuring they are evenly spaced and securely fitted into the designated slots or attached with screws as per the specific design. The bed frame includes 12 metal slats for robust mattress support.
- Secure All Connections: Once all components are in place, fully tighten all screws and bolts. Do not overtighten.
- Attach Decorative Elements (if applicable): Secure any decorative elements, such as the candle-like ball decorations on the headboard and footboard, if they are separate components.
- Install Protective Foot Pads: Ensure all support legs have anti-slip foot pads securely attached to protect your flooring and prevent noise.

Figure 2: Illustration of attaching metal pipes and securing with screws.

Figure 3: Detail of the bed frame center leg for enhanced stability.

Figure 4: Detail of the headboard's vintage elegance design.

Figure 5: Protective plastic pads on bed frame legs to prevent floor scratches and reduce noise.
Operating Instructions
Once assembled, place your mattress directly onto the metal slats. No box spring is needed. The bed frame is designed to accommodate mattresses between 8-12 inches thick. The embedded mattress design helps prevent sliding or shaking, contributing to a peaceful sleep environment.

Figure 6: The bed frame offers 10.4 inches of under-bed clearance for storage.
Maintenance
To maintain the appearance and longevity of your bed frame, wipe it with a dry cloth as needed. Avoid using harsh chemicals or abrasive cleaners, which can damage the powder-coated finish. Regularly check all screws and bolts to ensure they remain tight. The frame's surface powder coating is electrostatically sprayed for rust and wear resistance.

Figure 7: Material composition of the bed frame, designed for durability and resistance.
Troubleshooting
Squeaking Noises
If you experience squeaking noises, check the following:
- Tighten all bolts: Ensure all assembly bolts are securely tightened. Loose connections are a common cause of squeaking.
- Check silent foam strip: The center beam of this bed frame includes a silent foam strip designed to prevent squeaking from friction between metal and the mattress. Ensure this strip is properly in place.
- Verify screw washers: Each support leg features a screw design with a metal washer to prevent abnormal noise. Confirm these are correctly installed.

Figure 8: Screw washers help prevent squeaking.

Figure 9: EVA Mute Foam on bed slats for a quiet sleeping environment.
Specifications
| Feature | Detail |
|---|---|
| Size | Full |
| Material | Metal |
| Product Dimensions (L x W x H) | 78.1"L x 54.7"W x 45.1"H |
| Style | Modern with Classical Headboard and Footboard |
| Special Features | Easy Assembly, Fade Resistant, No Box Spring Needed, Squeak Resistant, Under-bed Storage |
| Included Components | Footboard, Headboard, Installation Manual, Screws, Slats |
| Weight Capacity | 1000 Pounds |
| Under-bed Clearance | 10.4 Inches |
| Recommended Mattress Thickness | 8-12 inches |
| Color | White |

Figure 10: Key dimensions and weight capacity of the Full size bed frame.
Warranty and Support
For any questions, missing parts, or assistance with assembly, please contact LOEWAY customer support. Information regarding product protection plans may be available from your retailer at the time of purchase.