1. Introduction
Thank you for choosing the Bellemave Outdoor Daybed Lounger. This versatile 2-in-1 sunbed is designed to provide comfort and flexibility for your outdoor spaces. It can be used as a combined daybed for two people or separated into two individual chaise lounges. This manual provides essential information for assembly, operation, maintenance, and care to ensure long-lasting enjoyment of your product.
2. Safety Information
- Read all instructions carefully before assembly and use.
- Ensure all components are securely fastened before use.
- Do not exceed the maximum weight capacity of 350 lbs per seat.
- Keep children and pets away from the assembly area.
- Place the daybed on a flat, stable surface to prevent tipping.
- Avoid exposing the product to extreme weather conditions for prolonged periods to extend its lifespan.
3. Package Contents
Before beginning assembly, verify that all parts are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Outdoor Daybed Frame (2 sections)
- Cushions (2 large seat cushions, 2 backrest pillows, 2 side pillows)
- Hardware Pack (bolts, washers, nuts, Allen wrench)
- Assembly Instructions
The product is shipped in 2 packages.
4. Setup and Assembly
Assembly is required for this product. All necessary tools are included. Follow the detailed instructions provided in the separate assembly guide to ensure correct setup.
4.1 Dimensions Overview
Refer to the diagram below for overall dimensions and individual component measurements.
4.2 Assembly Steps
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Assemble Frame Sections: Follow the included assembly guide to connect the frame components for each individual daybed section. Ensure all bolts are tightened securely.
- Attach Adjustable Leg Supports: Install the adjustable leg supports on each frame section. These allow for height adjustment on uneven surfaces.
- Combine or Separate Sections: The two individual daybed sections can be joined together using the provided furniture fixing kits to form a single large daybed, or kept separate as two individual chaise lounges.
- Place Cushions and Pillows: Position the 3.9-inch thick seat cushions onto the frame. Attach the backrest and armrest pillows using the side opening pocket design and velcro straps to secure them to the frame.
5. Operating Instructions
5.1 2-in-1 Configuration
The Bellemave Outdoor Daybed Lounger offers flexible configurations:
- Combined Daybed: Join the two individual frame sections using the provided connectors to create a spacious daybed suitable for two people.
- Individual Chaise Lounges: Separate the two frame sections to use them as two independent chaise lounges.
5.2 Using Side Spaces
Each side of the daybed features a solid acacia wood-topped space. These areas are designed to hold beverages, books, or other small items, enhancing convenience during use.
5.3 Adjustable Leg Supports
The daybed is equipped with adjustable leg supports. Rotate the bottom of each leg to fine-tune the height, allowing for stability on various ground conditions.
6. Maintenance
6.1 Cushion Care
The cushion covers are made of polyester fiber and are detachable and washable. For cleaning:
- Unzip and remove the cushion covers.
- Machine wash cold with mild detergent on a gentle cycle.
- Air dry or tumble dry on low heat. Do not bleach.
- Ensure covers are completely dry before reattaching to prevent mildew.
6.2 Frame Care
- Wipe the PVC and iron frame with a damp cloth and mild soap.
- Rinse thoroughly and dry completely to prevent water spots or rust.
- For the acacia wood side spaces, wipe with a damp cloth. Periodically apply a wood protector or oil to maintain its appearance and durability.
- Inspect all bolts and connections periodically and tighten if necessary.
- Consider using a furniture cover during inclement weather or prolonged periods of non-use to protect the daybed.
7. Troubleshooting
- Wobbling/Instability: Ensure all assembly bolts are tightened. Adjust the leg supports to compensate for uneven ground.
- Difficulty Combining/Separating: Check that the furniture fixing kits are properly aligned and engaged. Ensure no obstructions are preventing the sections from joining or separating smoothly.
- Cushions Sliding: Verify that the velcro straps on the cushions are securely attached to the daybed frame.
- Rust Spots: If minor rust appears on iron components, clean with a rust remover and apply a protective coating suitable for outdoor metal furniture.
8. Specifications
| Feature | Detail |
|---|---|
| Product Type | Outdoor Daybed |
| Model Number | Outdoor Sunbed Set |
| Color | Beige |
| Combined Dimensions (L x W x H) | 59" x 55" x 21" |
| Individual Dimensions (L x W x H) | 59" x 27.5" x 21" |
| Material | Acacia Wood Veneer, PVC, Iron, Polyester (cushion cover) |
| Cushion Thickness | 3.9 inches |
| Weight Capacity | 350 lbs per seat |
| Overall Product Weight | 63.9 lbs (with cushions) |
| Assembly Required | Yes |
| Country of Origin | Vietnam |
9. Warranty and Support
Specific warranty information for this product is not provided in the available data. Please refer to your purchase documentation or contact the retailer for details regarding warranty coverage.
For further assistance, missing parts, or any questions not covered in this manual, please contact Bellemave customer support through the retailer where the product was purchased.